Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack526
Thanks. Now on to the next. Easyed
Posted on: 2014/4/23 20:18
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28pack526
As I see it the springs separate the two flywheel halves that push against the facings which push against the hubs which are torqued up solid to the crank. This causes the drag noted in service manual. This allows the damper to adjust. This STANDARD is measured by the fixture ST 143. Obviously, your damper assembly, with new facing etc meets this STANDARD. "Adjust Damper Standard" means to me: The damper is allowed to adjust and the standard is measured as follows. No ajustment except changing the facing rings, cleaning etc. To function proper it has to meet this Standard. Let me know if you think I'm off in left field.
Posted on: 2014/4/19 20:07
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack526
I posted you a pm that I had a set of facing discs. Maybe the message did not get to you. Please post the smoothness, etc when you start your engine. Glad to have helped. easyed
Posted on: 2014/4/19 10:40
|
|||
|
Bumper rear shields
|
||||
---|---|---|---|---|
Quite a regular
|
Hi
Setting up to make bumper rear shields (part #137110(left) and (part #137111(right) and possibly bumper plate clamp assembly (part #137162). I havc a good original and I am going to duplicate for a friend. Probably make more than 1 set if there is interest. easyed ps fits 136/143, 236/243, 336/343, 443, 626/633, and 640/645 with double bar bumper. Will post a picture soon
Posted on: 2014/4/5 21:34
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack525
My friend has the two facing parts but unfortunately he had to take his wife to the doctors. Will see him Wednesday at lunch time. He has some other 443 parts that he wants me to make. (I have a machine shop) Actually measured the facing ring thickness. (.125 inches) will edit previous post. easyed
Posted on: 2014/3/31 16:12
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack526
Good news. My friend (has 1928 coupe) thinks he has the parts you need. Will see him 11:00 am Monday. Finally figured out how to post the balance of the pictures of my vibration damper. 2693 grease gooves 2694 pulley for side mounted water pump 2695 brass sheet seal between flywheel halves easyed
Posted on: 2014/3/30 16:46
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack526
Sorry I didn't mention that I'm talking to the guy that has the parts tomorrow (Sunday). Hope you can wait until then. easyed
Posted on: 2014/3/30 0:11
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack526
Good to see your progress. Forgot to include the flat brass seal. Trying to add the second picture.
Posted on: 2014/3/30 0:06
|
|||
|
Re: Solved: Vibration Damper Removal - 1928 5-26
|
||||
---|---|---|---|---|
Quite a regular
|
28Pack526
A couple of pictures of my later 626 vibration damper (part # 169559) You can clearly see the little metal lip that is the water thrower. The hub has a groove which I believe is for grease as has the brass sleeve. The picture is missing the springs, attachment bolts and inner pulley that works with the side mounted water pump. cheers easyed
Posted on: 2014/3/29 23:41
|
|||
|