Re: loose knob on window crank
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I had some ideas a couple of years ago for another year knob. I posted a couple of ideas and a photo of a 47 handlehttps://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=143701#forumpost143701
The 47 comes apart as I mention and show in the post but since the stem is riveted onto the handle I think it would probably need a new stem once you remove the old from the handle. I expect the old stem would be damaged too much to reuse and expect the damage causing the looseness is the handle hole is worn. You would probably need a larger stem or maybe add a spring washer in the location in addition to an original size stem. YesterdaysRadio still shows the 41-2 stems as well as the 47 knob in his catalog but since he is shutting down in a month or two if you want any new parts it might be good to get them soon. One thing that MIGHT work on the old knobs is to pick up an insert for plastics and put that in the knob in place of the old stem. I honestly don't know if the old plastic would tolerate much manipulation but if it will then use a larger screw to fit the oversize hole and some locktite in the insert to keep the screw in the insert after the knob is back on the handle. McMaster-Carr has a variety of styles and sizes of inserts. Do a search for Inserts for plastics.
Posted on: 2016/3/21 18:05
|
|||
Howard
|
||||
|
Re: loose knob on window crank
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Howard, Upon further investigation I found the stem is the problem. I'll take your suggestion and try to locate a plastic insert. If all else fails I'll swap the front and rear handles or locate a good used one.
Posted on: 2016/3/21 18:19
|
|||
|