|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
You can buy a raw part then get it recored. Would be a bit cheaper.
Do you have any radiator at the moment? You can also measure the dimensions and drop something in that sorta fits.
Posted on: 6/26 17:47
|
|||
|
1955 400 | Registry | Project Blog
1955 Clipper Deluxe | Registry | Project Blog 1955 Clipper Super Panama | Registry |
||||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Just popping in
 
|
I do have the original radiator. It is full of holes. To refurbish it would cost around $1700. I found a new aluminum one online for $1400. Im just putting my feelers out before I spend that much dough. Is there a similar enough radiator that will swap easily?
Posted on: 6/26 17:54
|
|||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Just can't stay away
 
|
Thor -
I have the same basic model and the same concerns with my radiator. There's an excellent radiator shop in Oklahoma City that isn't outrageously overpriced. I talked with them and the owner said if mine can't be rebuilt, he could take the tanks and mate them up with a core that would fit them and the engine's cooling needs. I believe he said that there was an International Harvester truck or tractor (can't recall which) that the core is virtually identical. That might be a possibility for you.
Posted on: 6/26 19:23
|
|||
|
Todd W. White
Sapulpa, Okla. 1949 2262 DeLuxe Eight Touring Sedan |
||||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Home away from home
|
Thor, contact Mike Chirco, Tucson Packard (520) 336-0057.tucsonpackard.com/ Please tell this knowledgeable gentleman that Mike, '47 Super Clipper, Walnut Creek, CA referred you.
Posted on: 6/26 19:52
|
|||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Home away from home
|
I do have a few radiators to choose from that look like they were recently re-cored. they have been pressure tested. 520=336-0057 Mike/Tucson Packard
Posted on: 6/27 1:33
|
|||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Home away from home
|
Rebuilding radiators is very expensive these days, like everything. I suspect the most economical route would be to find a good used radiator for you're car.
Posted on: 6/27 10:40
|
|||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Just popping in
|
Just got one ordered from Mike at Tucson Packard for a great price. Thanks for the help everybody!
Posted on: 6/28 15:32
|
|||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Home away from home
|
I have a 1951 288 in a 2498 business coupe with an Ultramatic. I measured the radiator including the input and output. I matched these dimensions with the data at "Find a Radiator By Core Size (H x W)" atshop.championcooling.com/index.php?route=product/coresize .
I determined that the radiator used in a 1955-1957 GMC truck was almost an exact fit. I bought one for $138. I bought some 1" square and 2" flat aluminum and adapted the mounting. I spent about $160 altogether. Otherwise it was going to cost me over $2,000. I would have been scared to work anywhere near it.
Posted on: 6/28 18:10
|
|||
|
||||
|
Re: Looking for a radiator
|
||||
|---|---|---|---|---|
|
Quite a regular
 
|
Posted on: 7/16 8:07
|
|||
|
||||
