Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
some of you know,, but i found out today, the water pump bearing and shaft are one, the parts place had two pumps, one packard, the other golden hawk, both cast impellers. ,, but one had a shaft boot legged, cause it was short on impeller side,
i think water pump bearings used now for packard, are random, in lenght, my pump that came off of car you could see where shaft was cut, so now its off to find a bearing reference chart, so my plan to use stainlees is out, unless i check a marine repair place, the auto parts place did have a steel impeller too, no idea what car, it was on the water pump, but turned in, but when i find a plastic impeller, i am going to get these cast in brass,, think alum, will give up..
Posted on: 2014/6/23 21:30
|
|||
Riki
|
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
terrill has parts or kits, oversized shafts, and steel and cast impellers, going back to 1935,,
Posted on: 2014/6/24 21:43
|
|||
Riki
|
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
for any new and up and comming ,, DIY ers,,,,,,,,
the 1/4 inch horse does not let pressure get to outside edge, all pressure is on center of impeller, need to cut out seal, which is a job,,dremel, does it, if you didn't want shaft, you could it too,, flaring tool work great for holding things to press out, i get a pipe inside dia. close to what i am pressing out, also see henrys blog, 102,ish, he does excellent work,,
Posted on: 2014/6/24 22:20
|
|||
Riki
|
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
nos water pump shaft and after market,
after market is , 1/8 inch shorter on impeller side, and about 3/8s inch longer on fan side
Posted on: 2014/7/6 0:38
|
|||
Riki
|
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
Good work, Riki. We can live with the minor length differences. Where are they available and for how much?
jack vines
Posted on: 2014/7/7 21:09
|
|||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
Hi,,jack,
26 bucks to the mail box, ,,,18 for the shaft,,terrill machine,
Posted on: 2014/7/7 21:16
|
|||
Riki
|
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
56 clipper,
with that washer looking thing it would seal real good, but no room for it, crushed my new seal, i guess if milled the impeller , but more work, will wait till new seal comes, that is mc kay water pump grease,,, 30 ,,40 years old, maybe older
Posted on: 2014/7/7 22:07
|
|||
Riki
|
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Forum Ambassador
|
Told you not to use that washer. Uh hmmmm. If you look at the backside of the impeller it already has a flat surface for the seal. If you milled the impeller to put in that washer it came with you would just be creating unnecessary work for yourself.
Most modern antifreeze has pump lubricant in it already...... No harm in the grease though I guess.
Posted on: 2014/7/7 23:25
|
|||
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021 [url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard |
||||
|
Re: water pump
|
||||
---|---|---|---|---|
Home away from home
|
i know henry,,,damn,,
but thought i would try it, ,,,
Posted on: 2014/7/8 7:51
|
|||
Riki
|
||||
|