Re: 37 Packard 2/4 V12 door handles
|
||||
---|---|---|---|---|
Just can't stay away
|
Did yours have the escutcheon and the retention bracket under the escutcheon? It isnt in your photo (you may have left those out of the photo).
The snap ring holds the compressed spring which pushes back on the threaded collar and that pushes back to the main handle-stem assembly. You should be able to attach the under retention bracket with two screws to the door...then the escutcheon + threaded collar + handle by threading the collar (which pulls the escutcheon and handle with it) in using an external spanner with a stud that goes into that hole in the threaded collar...the hole is a spanner stud grasping feature, not a hole for a set screw. Its a bit finicky and a PIA (be careful not to scuff your paint job). Take a close up photo of the collar threads so we can see if it is worn/broken off, etc...often happens and you need a new collar (several people will have one of those, especially at Hershey). let me know if this explanation and photos confuses or clarifies. Attach file: 441_6507857e68a16.jpg (16.56 KB) 441_650785a70f79b.jpg (33.73 KB) Packard door handle threaded collar fastening.png (65.46 KB)
Posted on: Today 16:32
|
|||
|