Packard Forum Index » Project Blogs

Topic: '38 1608 V12 Project

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 11 12 13 (14) 15 »

blue40devil

Re:

#131

Home away from home

Working on the dizzy. New paint and tag.

Attach file:

Packard dizzy2.jpg (118.59 KB)

Posted on: 2022/4/9 9:06

blue40devil

Re: Dizzy

#132

Home away from home

Installation of the condenser/point plate is complicated by a spring that goes over the pins in the advance weights. Ended up using a piece of string thru the condenser mounting windows and pulled it back while installing the plate over the advance weight pings.

Attach file:

Packard dizzy3.jpg (126.01 KB)

Packard dizzy4.jpg (141.63 KB)

Posted on: 2022/4/9 9:10

blue40devil

Re:

#133

Home away from home

Forgot, here is before.

Attach file:

Packard dizzy5.jpg (148.96 KB)

Posted on: 2022/4/9 9:21

R H

Re: '38 1608 V12 Project

#134

Home away from home

Something else i need to do to.

Have some spares.

And a friend in Canada knew a guy with 12 parts and had a dist.

I bought it.. My friend has it..

They guy had. Or maybe still does. New in create. Either exhaust or intake manifold

Posted on: 2022/4/9 9:22

Riki

blue40devil

Re: '38 1608 V12 Project

#135

Home away from home

Riki,

If you have no interest in the manifolds, I might. Do you have any info?

Posted on: 2022/4/9 9:35

R H

Re: '38 1608 V12 Project

#136

Home away from home

Bill. ..

I'll call and ask my friend If he is still in. Contact with him.

The guy collects military vehicles .

He is near Ottawa.

Posted on: 2022/4/10 1:35

Riki

R H

Re: '38 1608 V12 Project

#137

Home away from home

Bill

He will see him in a month.

But it has been a few years since he's seen him.

Will know status then.

Posted on: 2022/4/10 16:44

Riki

blue40devil

Re:

#138

Home away from home

Cleaned up the starter. Fresh paint, new brushes, turned the commutator and undercut the grooves. New polished stainless attachment screws.

This is an Owen-Dyneto starter. My car is a very early '38 so my guess is it is a carryover from '37 or it just got replaced somewhere in its life. Still looking for the starter solenoid. The square box one.

Attach file:

Packard starter.jpg (143.79 KB)

Posted on: 2022/4/11 10:22

blue40devil

Re:

#139

Home away from home

Finished unit, less tag and solenoid.

Runs good.

Attach file:

Packard starter2.jpg (151.66 KB)

Posted on: 2022/4/12 11:01

blue40devil

Re:

#140

Home away from home

Back to the dizzy. I got the points conversion from Dwight Heinmuller. It is the silver set at the top right. Nicely machined. I also fitted Onan (Cummings) 312-0256 condensers. You can get them from RV dealers as they are used in Onan Generators and are very dependable, but pricy.

Attach file:

Packard dizzy6.jpg (213.04 KB)

Posted on: 2022/4/21 9:59

Board index » Discussion » Project Blogs » '38 1608 V12 Project

Top

Previous Topic

Next Topic

« 1 ... 11 12 13 (14) 15 »

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.