|
Re: Owen Dyneto generator wiring
|
||||
|---|---|---|---|---|
|
Forum Ambassador
 
|
Here is a quick and dirty explanation of the difference between the AC alternator and how the commutator makes essentially the same coil of wire passing thru a magnetic field into a DC generator.rfwireless-world.com/Terminology/AC-generator-vs-DC-generator.html
The typical generator has multiple coils of wire with one or two coil ends connected to each commutator segment. Because of the way the coils are spaced around the armature there is always one approaching the field from the same direction so the output is relatively ripple free.
Posted on: 2017/11/25 16:02
|
|||
|
Howard
|
||||
|
||||
|
Re: Owen Dyneto generator wiring
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Quote from web site supplied above:
"In the dc generator, the emf generated in the armature windings is converted from ac to dc by means of the commutator."
Posted on: 2017/11/25 22:26
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
