Packard Forum Index » Project Blogs

Topic: RIk's 56 ultramatic

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 47 48 49 (50) 51 52 53 ... 75 »

R H

Re: RIk's 56 ultramatic

#491

Home away from home

Kevin

Try again. I made another video.

That should be the right one.

Posted on: 2021/7/22 19:08

Riki

R H

Re: RIk's 56 ultramatic

#492

Home away from home

youtu.be/rcieZYwyEiA

Pretty cool..

Posted on: 2021/7/23 1:39

Riki

R H

Re: RIk

#493

Home away from home

A change in dorman window motor.

So different adapter.

Just the start of it.

Edit.

Random cut. Turned out to be 7/8s.

1 inch will work.

Little short for Packard gear

Plan. Make a piece 1/2 inch.wide or 3/4. Screw to adapter.

1/4 inch piece represents 1/4 inch plate to be added.

The distance from regulator about an inch. For stand offs spacer.

Attach file:

20210731_135832_HDR.jpg (289.46 KB)

20210731_135818_HDR.jpg (266.97 KB)

20210731_195115.jpg (292.97 KB)

20210731_205603_HDR.jpg (236.47 KB)

20210801_001447.jpg (282.63 KB)

Posted on: 2021/7/31 16:18

Riki

R H

Re: RIk

#494

Home away from home

Window motor. 2000-2005 ford. Excursion. F250.350

Attach file:

20210805_084933_HDR.jpg (284.51 KB)

20210804_161503_HDR.jpg (213.38 KB)

20210804_161426_HDR.jpg (283.59 KB)

20210811_183833_HDR.jpg (228.95 KB)

20210811_183755_HDR.jpg (239.01 KB)

Posted on: 2021/8/8 8:06

Riki

R H

Carb

#495

Home away from home

Found out bucking problem. Wrong power valve.

It was dumping gas in to the air cleaner.

The one power valve is a packard.

The other from ebay. So I cut that long nose off.

Made it about length of Packard. No bucking.

I had at least a cup of gas in air cleaner.

Attach file:

20210829_185954_HDR_(1).jpg (192.66 KB)

20210829_154555_HDR.jpg (164.92 KB)

Posted on: 2021/8/29 21:24

Riki

R H

Re: RIk

#496

Home away from home

Today.

The fitting on vacuum advance was loose so have vacuum back.

But. Moist power to pushbutton and stereo. So have to check that ..

Also. The paper air filter was blocking air flow. Going to look for a 3 inch tall one.

Marine texted the Packard 12 timing cover... Was messy.

Wish I saw blues post.

Going to need a 1-1/2 ream. And a big angle cutter.

And need to mix up a little more ..

The water pump area if its fits not touching it

Attach file:

20210914_170630.jpg (303.10 KB)

20210914_165253_HDR.jpg (291.04 KB)

20210914_165213_HDR.jpg (279.10 KB)

Posted on: 2021/9/14 22:37

Riki

R H

Re: RIk

#497

Home away from home

This filter is what you need to replace oil bath.

I had one that was to short and was not getting enough air.

The car has zip now. Now bucking. Going up hills.

Attach file:

20210916_230851_HDR.jpg (195.85 KB)

Posted on: 2021/9/17 1:11

Riki

R H

Air filter

#498

Home away from home

Stp sa160 air filter. Specs.

I'd. 7.62

Height. 2.76.

Of. 10 inch.

Wix 46018.

But need 7 inch ID...

And not as tall...

Finding a filter. 7 x 2-1/2. x 9 .. Would better..

Best to cut bottom seal off. Seal blocks air intake.

Attach file:

20210921_132622_HDR.jpg (437.57 KB)

Posted on: 2021/9/21 20:19

Riki

R H

Air cleaner

#499

Home away from home

This paper fits the best.

Stainless pads arrived. Qty. 12

One more package would fill it.

But think this will work.

Sprayed them down with silicone.

Attach file: