Packard Forum Index » Project Blogs

Topic: RIk's 56 ultramatic

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 66 67 68 (69) 70 71 72 ... 78 »

Pgh Ultramatic

Re: RIk's 56 ultramatic

#681

Home away from home

Dab some blue loctite on there

Posted on: 2024/1/20 9:58

R H

Re: RIk's 56 ultramatic

#682

Home away from home

Thanks spud.

Didn't think of loctite..

I staked them.

Drilled tapped jb Weld. Post tighten up.

So hopefully with air cleaner on it will hold.

Attach file:

20240120_181119.jpg (392.01 KB)

Posted on: 2024/1/20 23:09

Riki

R H

Re: RIk's 56 ultramatic

#683

Home away from home

The wing nut was worn. After 68 years.

New one 8 f.ing dollars

Attach file:

20240129_142919.jpg (525.03 KB)

Posted on: 2024/1/30 19:21

Riki

BigKev

Re: RIk's 56 ultramatic

#684

Webmaster

That's only 11.7 cents per year!

Posted on: 2024/1/30 19:48

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

R H

Re: RIk's 56 ultramatic

#685

Home away from home

oh.!. That helps Kevin!.

Posted on: 2024/1/30 22:01

Riki

R H

Re: RIk's 56 ultramatic

#686

Home away from home

Ignition trouble again

Moving coil off intake.

Then. Pertronics is confusing.

They say you can keep ballast. Then with their coil. Take it out.

So leaving pink Packard wire out. Jumping 12 volt from Ignition.

Talking with hh56 pretty sure my issue is the ballast..

After start up Pertronics is only getting 6 or 8 volts.

Edit..

Don't know ohms of delco coil.

M

Attach file:

20240217_202432.jpg (402.13 KB)

20240217_174538.jpg (448.48 KB)

Posted on: 2024/2/17 23:52

Riki

Packard Don

Re: RIk's 56 ultramatic

#687

Home away from home

You definitely don’t want the ballast with Pertronics! It’s bypassed for starting but as soon as you’re running, it kicks in to lower the voltage to the coil which is why I always use their coil. I had thought of taking an old ballast and modifying it to look stock so as to be bypassed where the wiring could be kept intact but I’ve not yet tried it.

Posted on: 2024/2/18 2:42

All generalities are false.

Don Pierson
Packard / IMPERIAL page
CA DMV Licensed Vehicle VIN Verification

1951 Henney-Packard 3-Door Long Wheelbase Air Force Ambulance
1954 Packard Patrician
1954 Packard Patrician Parts Car
1956 Clipper Custom Sedan

R H

Re: RIk's 56 ultramatic

#688

Home away from home

Thanks Don.

Posted on: 2024/2/20 16:00

Riki

R H

Re: RIk's 56 ultramatic

#689

Home away from home

My L.

Micro switch gave up. Delima. Pull the wires thru column or replace in car.

Ugh.

Attach file:

20240225_133101.jpg (929.67 KB)

Posted on: 2024/2/25 16:41

Riki

R H

Re: RIk's 56 ultramatic

#690

Home away from home

Replaced in car.

Don't know what I did with 2 pole.

But found these 3 pole spdt ones. I had

Ground off 3rd pole.. the throw isn't as pronounced as other switch.

But it works.

Of coarse. The switch I removed. Works when it's out. Something is up with it.

Attach file: