![Bottom Bottom](https://packardinfo.com/xoops/html/modules/newbb/templates/images/icon/down.png)
![Previous Topic Previous Topic](https://packardinfo.com/xoops/html/modules/newbb/templates/images/icon/previous.png)
![Next Topic Next Topic](https://packardinfo.com/xoops/html/modules/newbb/templates/images/icon/next.png)
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Quote:
JW wrote:....Remind Wade to replace the flexible rear brake line as it has most likely become compromised by absorbing the force of the rotating differential..... We're on top of that as evidenced by the prior day's post Quote: Ozstatman wrote:Thursday 13th October 2011......Parts required at this stage.....new rear flexible brake hose...... Regarding your other comment of: Quote: JW wrote:....She is lucky the rear brakes continued to work to bring the Packard to a safe stop..... Actually John, Annet probably pulled up on the front brakes only because the flexible hose was kinked to such an extent that brake fluid couldn't get to the rear cylinders. Lucky the line held otherwise, being single system hydraulics, there would have been nothing! Also received an email from Noel, wherein he said ".....I had a good trip home yesterday. All went well but there seems to be a bit of a squeak under the bonnet which I'll investigate further next week....." Wonder if it's because Wade fixed the horn button and horn ring rattles that Noel can now hear the squeak?
Posted on: 2011/10/14 19:12
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Monday 17th October 2011
Not a great deal of progress on Junior today, in fact in some ways it went backwards. First thing was getting the diff housing around the corner so the mounting pads can be re-welded. Because the diff housing will be POR-15'd after it returns it was decided that many of the other loose parts would be similarly treated if required. So, I spent a fair amount of time cleaning parts. While doing that Juniors Dad, John, arrived, hadn't expected to see him so soon. It was good that he came though as Wade was able to discuss a number of things concerning what had been done as well as what was going to be done. And why did things go backwards? Number of factors, one being the discussions between Wade and John. Walking around under Junior the speedo cable and the rear shocks were mentioned as matters that needed checking. Better to do those now while things are readily accessible. Another reason was working in proximity to various components that demand inspection because of their nature, like brakes. Because the hand brake cables had been torn asunder the rear brake shoes had to be released from the backing plates in order to remove the broken/mangled "spigots" that the cables pass through on the backing plates. Doing that was also to facilitate cleaning of components but it also meant close attention being paid to all the brake componentry. Took the wheel cylinders off and apart and gave the cylinders a very light hone, will replace the rubbers too. Found the brake shoe springs, at least on one side are definitely NOT Packard! And three out of four of the brake shoe locating pins were bent and one was shorter than the other three! Regarding the broken/mangled "spigots" I did suggest that those on spare backing plates from a post-war Packard may fit, saving repair work on the old ones, and they did! I also thought I might be able to "do a Wade" and produce a part off my Packard shelf to fit Junior, to wit, an inner speedo cable. However when I returned with the inner cable found it only had one square end so that put paid to that. However in the time that I'd taken to go home and pick up the cable Wade had a closer look at Junior's cable and feels a new cable may not be necessary. Wade found the present cable was routed incorrectly and re-routed it to straighten it's path to the speedo drive. Once the diff housing mounting pads are re-welded to the housing all components requiring painting including the pumpkin will be painted then once the replacement parts arrive will be assembled. Only parts that may take a little longer to arrive are the new hand brake cables but at least Junior can be made mobile without those at a pinch. Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2011/10/17 2:43
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I would NOT be jealous of that snubber. Mine new snubbers are way more heavy duty than that original, which I would lay a bet needs replacement. And the stake? One 354820 switch - I think I've got one here somewhere - and for the record, as I suspect you are learning, they do wear out. Check that old snubber - I will stand by Wades evaluation. DAF
Posted on: 2011/10/17 14:48
|
|||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Tuesday 19th October 2011
Slow progress today with a late morning start and after picking up the welded up diff housing and it, the pumpkin, shock/spring hanger brackets, "spigots", other fittings and hardware were final cleaned and setup in readiness for painting. Then lunch intervened, the weekly workshop lunch that's been re-scheduled from Thursdays to Tuesdays that is. Besides being the first workshop lunch on a Tuesday it was also Wade's turn to provide the meal. To this end the menu had been settled as gourmet steak sandwiches and all the ingredients had been purchased yesterday in readiness. I'm not much of a cook but today I was pressed into service by Wade to assist. Cut up some capsicums to serve as both egg rings on the BBQ and to be cooked on the plate along with onions, tomatoes, lamb & mint sausages and the steaks. Whole grain thick sliced bread provided the platform on which your choice from the fillings provided together with your choices of sauces and condiments could be made. Must have had luck on my side, didn't burn anything to a crisp and, everyone seemed to enjoy their sandwiches, some even going back for seconds! After lunch it was then into the serious stuff, painting with POR-15! And this time I can say, and I think it's a first, that I didn't get any of the paint on me! Wade tells me that he's ordered all the parts required but by a strange quirk and contrary to my statement the other day of Quote: Ozstatman wrote:Monday 17th October 2011......Only parts that may take a little longer to arrive are the new hand brake cables...... Quote: flackmaster wrote:I would NOT be jealous of that snubber. Mine new snubbers are way more heavy duty than that original, which I would lay a bet needs replacement. And the stake? One 354820 switch - I think I've got one here somewhere - and for the record, as I suspect you are learning, they do wear out. Check that old snubber - I will stand by Wades evaluation. DAF When it comes to Packard parts, I will not be laying any bets against you!
Posted on: 2011/10/18 2:25
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Friday 21st October 2011
Dropped into the workshop this morning to discover that Wade has refitted the diff housing to Junior. He's also refitted the wheel cylinders to the backing plates. Once the ordered parts arrive, maybe next week, final assembly can be undertaken. With Junior up in the air, Wade took the opportunity to give Junior a lube job and to drain and replace the engine oil and in doing so fitted a new copper washer to the sump plug, no more leaks from there now. John had also been over yesterday and I understand he's pleased with the progress so far. Until the parts arrive Wade's also been tinkering with some things on and for The Fossil, just what I didn't find out, maybe next week?
Posted on: 2011/10/21 0:35
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Monday 24th October 2011
A fleeting appearance at the workshop this morning to find 1) Another Packard there, Michael's '54 Convertible, and 2) No parts yet from the US, so no work for Mal. Michael was there to talk to Wade about rebuilding the front end of the Convertible. Wade will do that once Michael buys a complete front end kit and it arrives from the US. Sitting on the bench was a radio Wade had fixed for Harvey's '40 Willys. It's of more recent vintage than the Willy's being an AWA Cruiser Transistor and Harvey wondered, because it was "full" of transistors, whether Wade could fix. Well, Wade could and did fix it, finding lots of valves and one, count 'em, one transistor only! All the valves AND the transistor were replaced as well as capacitors but it still wasn't working right until Wade found it was fitted with a 4 Ohm speaker instead of the 15 Ohm it needed. Wade also tells me he's keen to get The Fossil up on the hoist once Junior is out of the way. Over the weekend, I also had a call from JohnM about taking him and his TJ Richards bodied '39 Six Sedan to see the guy who repaired the bumps and bruises on my '38 Eight before I sold it. John has some nicks and scratches on his '39 which he wants fixed. Have arranged to go to John's house tomorrow afternoon and from there I'll drive the '39 Six because John is 83 and has an injured shoulder at the moment which prevents him from driving it. So without gainful employment at the workshop I headed home. About halfway between the workshop and home, I pass by the house of RichardW. Richard has a 30/98 Vauxhall Tourer, builds roadster/convertible wooden top bows from scratch and supplies rivets of all shapes, sizes and configurations. Today parked outside Richard's house, on a car trailer, was a highly polished aluminium(aluminum) bodied '21 E-type Vauxhall! Only had a chance to take a few pic's before the cars owner drove off. Afterwards spoke to Richard who advised the guy had driven down from Queensland, 500 miles north, with another Vauxhall which he'd put on a ship to the UK. And was now returning to Queensland with the Vauxhall on the trailer, which is his "run-about" and had been used on a recent Vauxhall club rally on the south coast of New South Wales. And the Vauxhall he'd put on a ship? It's going to be a participant in the London to Capetown Rally next year! Apparently the guy has participated in a couple of recent Peking to Paris Rallys so knows what he's up against. EDIT - Almost forgot. Richard told me he's found a pair of Rudge Whitworth wire wheels from which a mate of his is only going to use the 24" rims. This means the hubs, one of which has a Packard hub cap, are available as well as spokes and possibly other bits. DavidM - You come to mind as someone who would know whether there are any Aussie Packard owners who might be interested in the hubs? If you do, let me know and I'll pass on Richards contact details. Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2011/10/23 21:51
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Tuesday 25th October 2011
Another day, another shorter stay at the workshop although this time some work was done. The parts for Junior are still to arrive from the US. Hasn't been long, but the wait is frustrating. However this morning moved onto The Fossil for which Wade made an inner firewall insulating panel yesterday, now came the fitting. Part of the problem with this is that although Wade has two originals neither are in a good state of repair. One is for the original RHD body and the other came off the replacement LHD body. Replacements are available from the US but these are configured to fit LHD bodies so won't work with The Fossil where the firewalls were reconfigured from LHD to suit the RHD rolling chassis. Additionally there were many holes required in the panel to suit fitment for The Fossil with a radio and speaker box fitted to suit RHD. The panel is now fitted on the inside the firewall but is yet to be bolted down because of other fittings still needing to be mounted. Turned then to fitting the accelerator linkage. Although the firewall had been converted with the best of intentions from LHD to RHD it's only now that things are being fitted that it was found some minor grinding and drilling was required to obtain the proper alignment for the linkage. Then in the afternoon drove JohnM's '39 TJ Richards bodied '39 Six Sedan over to Colin's for a quote for paint repairs to the nicks and scratches on the car. John followed me over in his daily driver and we ended up leaving the '39 with Colin. Reason being it was a rainy day and with water all over the body Colin wasn't prepared to quote on that basis. He's going to wait for a fine day without water on the body to give a quote on what he sees then. Colin mentioned it was an old panel beaters trick to hose down a car when a customer came to pick it up after it had been repaired! After yesterday's post about the Rudge Whitworth wire wheel hubs DavidM is now hot on the trail, per this edited extract from David's email ".....24" wheels are hens teeth and were highly sought after when a few people were restoring that model. Everyone I know has now solved their wheel issue one way or another. However I would be interested in acquiring the hubs just to save them in case I or someone needs them one day....." Attach file: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
Posted on: 2011/10/24 23:50
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Wednesday 26th October 2011
Still another day and still another fleeting pit stop at the workshop. The hand brake cables for Junior had arrived yesterday, after I left, and Wade has fitted them to the backing plates. Wade is also in the midst of re-arranging benches and things in his corner because he's been the lucky recipient of a bench with a draintop and a slide out catch tray. The bench came from the same workshop the hoist came from and will be very handy for all the cleaning that's required with Packard parts. The reason I called in wasn't because of that but to borrow a pop rivet gun to repair a screen door at home, my gun didn't have a large enough fitting for the size rivet I was using. Then I promptly broke the rivet gun on the first rivet I tried it on! ![]()
Posted on: 2011/10/25 23:05
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Re: Wade's Workshop
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Thursday 27th October 2011
Yesterday, the comfort package of Packard parts for Junior finally reached the workshop. Wade refitted the pumpkin to the diff housing with a new gasket, fitted the new shocks, repacked the rear axle bearings and refitted the axles. Then this morning, after more cleaning, the new outer axle seals, backing plates, brakes, brake lines and brake drums were fitted. The hand brake cables connected and adjusted and then re-adjusted. Then the rear brakes were bled but just as we were about to start that process Juniors Dad, John, arrived. Bled the brakes with a nice firm pedal resulting. John was pleased to see the progress made and see it was getting closer to being finished. After John left the skimmed pinion shaft was fitted to the pumpkin, the tailshaft re-fitted, the diff filled with fresh oil and the rear wheels and tyres re-fitted. Time to bring Junior back to life but required a 12V boost to get going. Then, once warmed up, put through his paces with wheels off the ground. Everything appears to be working and there are no untoward noises. Tomorrow we'll clean and check the plugs as well as perform a compression test although John says he's already done one with he thinks #3 showing only about 20/25psi, could be the explanation for the miss. And Bill B forwarded a pic from his US trip with the message "Pride of place at Nethercutt Collection,Sylmar,CA. Eat your heart out!"
Posted on: 2011/10/27 3:52
|
|||
Mal
/o[]o\ ==== ![]() Bowral, Southern Highlands of NSW, Australia "Out of chaos comes order" - Nietzsche. 1938 Eight Touring Sedan - SOLD 1941 One-Twenty Club Coupe - SOLD 1948 Super Eight Limo, chassis RHD - SOLD 1950 Eight Touring Sedan - SOLD What's this? ![]() Put your Packard in the Packard Vehicle Registry! Here's how! Any questions - PM or email me at ozstatman@gmail.com |
||||
|
Register To PostTopic is Locked