Happy Easter and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
100 user(s) are online (72 user(s) are browsing Forums)

Members: 0
Guests: 100

more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal




ISO 1937 120-c water pump back plate
#1
Home away from home
Home away from home

ElGroucho
See User information
Does any vendor reproduce these water pump backing plates? Mine is slightly corroded, don't know if that's contributing to a slight leak on the bottom side. But wanted to see if anyone is reproducing these or if anyone has a clean straight backing plate. Thanks in advance. Attached is a picture of mine

Attach file:



jpg  20210909_113754.jpg (417.80 KB)
200605_613a54b1301b8.jpg 1920X1440 px

Posted on: 2021/9/9 13:39
 Top  Print 
 


Re: ISO 1937 120-c water pump back plate
#2
Forum Ambassador
Forum Ambassador

Owen_Dyneto
See User information
Not aware of a reproduction but that plate looks entirely serviceable. Dress the surface a bit if you wish with some emery cloth on a flat backing, but even as is just a normal gasketing job with Permatex or gasket shellac should be all that's required.

But I do notice a witness mark where the center of the impeller has contacted the plate and that warrants some investigation.

Posted on: 2021/9/9 16:59
 Top  Print 
 


Re: ISO 1937 120-c water pump back plate
#3
Home away from home
Home away from home

ElGroucho
See User information
Thanks Owen, I'll try a little Emery cloth just to clean up a little bit. I had used some permatex before and had a small leak, hence my concern. Yeah I noticed that mark as well. I'll investigate.

Quote:

Owen_Dyneto wrote:
Not aware of a reproduction but that plate looks entirely serviceable. Dress the surface a bit if you wish with some emery cloth on a flat backing, but even as is just a normal gasketing job with Permatex or gasket shellac should be all that's required.

But I do notice a witness mark where the center of the impeller has contacted the plate and that warrants some investigation.

Posted on: 2021/9/9 23:02
 Top  Print 
 


Re: ISO 1937 120-c water pump back plate
#4
Home away from home
Home away from home

Will Rose
See User information
I have a backing plate. Contact me at 210-260-5646 email at will@rpland.com. Visit my website for other parts at rpland.com/packardparts

Posted on: 2021/9/10 1:48
 Top  Print 
 








Search
Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved