Packard Forum Index » V-8 (1955-56)

Ok.

I would to know. How did Packard put these on.

And supposedly shops are using them to replace molding

These go where the double panel is so there is no. Access from behind.

Restores must use a push spring clips. In replace.

My plan is to drill thru and use a threaded stud. Then grommet to plug hole.

Attach file:

---

  20220702_142553_(1).jpg (238.58 KB)


  20220702_142526_(1).jpg (201.46 KB)


  20220702_142443_(1).jpg (160.08 KB)