Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
50 user(s) are online (40 user(s) are browsing Forums)

Members: 2
Guests: 48

West Peterson, Chiefdan, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal




Attaching 1951 "Ultramatic" Script
#1
Just can't stay away
Just can't stay away

kunzea
See User information
How are the "Ultramatic" script pins secured?

Posted on: 8/27 19:53
 Top  Print 
 


Re: Attaching 1951 "Ultramatic" Script
#2
Forum Ambassador
Forum Ambassador

HH56
See User information
If they are straight unthreaded pin like studs cast with the script probably one of two ways.

If you can reach the pin from the back side such as a trunk lid, front fender or door where the upholstered panel can be removed and the hole is roughly the same size as the stud probably done with a flat style speed nut. Packard used both round and rectangular style but today use what you can find in the correct size.

If the back cannot be accessed such as in a double walled part of the body like near a wheel well or if there is something structural in the way that can not be removed, the hole is generally about twice as large as the stud. In that case there was probably a tubular speed nut pushed in the larger hole and then the script studs were pushed into those.

To get the proper fastener you need to measure the diameter of the stud and order the appropriate size. Here is a small sample of fasteners from the Restoration Specialties catalog. They have a fairly good assortment of styles and sizes including some sealing types if it is going somewhere water leaking in could be a problem -- like in the trunk..

Attach file:



jpg  flat.jpg (117.47 KB)
209_630ac27475f3b.jpg 1272X674 px

jpg  tubular.jpg (186.60 KB)
209_630ac28299182.jpg 1032X1402 px

Posted on: 8/27 20:20
Howard
 Top  Print 
 


Re: Attaching 1951 "Ultramatic" Script
#3
Just can't stay away
Just can't stay away

kunzea
See User information
See attached image. I had noticed the recessed area around the pins before but didn't think about it. The rear-most pin is accessible but the other two aren't. The pins are 1/8". The tubular nylon pins 13964 are 1/8" diameter with 1/32" head thickness and 15/64" head diameter. The recessed area diameter is greater and the depth will result in a .01725" stand-off.https://denverautofasteners.com/13964-nylon-tubular-nut-1-8-stud-size/

Attach file:



jpg  Ultramatic Script IMG_20220901_125032571_PORTRAIT.jpg (6,148.91 KB)
85709_6310eb5f9e6da.jpg 4000X3000 px

Posted on: 9/1 12:27
 Top  Print 
 








Search
Recent Photos
Boneyard 400 close up (11/30/2022)
Boneyard 400 close up
Boneyard 400 (11/30/2022)
Boneyard 400
1937 115c Touring (11/27/2022)
1937 115c Touring
Photo of the Day
1936 1402 7 Passenger Sedan - Wauchope NSW Australia
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2021, PackardInfo.com All Rights Reserved