Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
186 user(s) are online (173 user(s) are browsing Forums)

Members: 0
Guests: 186

more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



« 1 (2)

Re: 1940-120-runs fine for a while , then sputters and quits
#11
Just can't stay away
Just can't stay away

Dan Marrin
See User information
Thanks to all who have responded with the collective voice of all of your various Packard experiences. I am again reminded of what a great resource this site and all of you, its members, are.

I am just itching to get the car out on the road again, so I can try all of your various suggestions. Unfortunately, I won't be able to troubleshoot this problem until I return to WV in a couple of weeks, but promise to update this thread when I discover the problem and what eventually solves it (hopefully).

Posted on: 2008/8/2 9:13
Dan Marrin
Summers; Breezy Point, MN, Winters; The Villages, FL
'48 Sup8 conv, '48 Sup8Del LWB sed, '58 Hawk.
 Top  Print   
 


Re: 1940-120-runs fine for a while , then sputters and quits
#12
Just can't stay away
Just can't stay away

Scott726
See User information
Dan,

I had the same situation with a 67 Oldsmobile with a quadrajet. There was this itty bitty chunk of junk in the carb bowl. It would run for a while then this single flake of crud would cover the hole for the idle circuit and it would just sputter out. As soon as the flow stopped, the crud floated away and the car would start right up. Drove me nuts, took forever to find it too. Good luck with your puzzle...

Scott

Posted on: 2008/8/2 11:04
 Top  Print   
 


Re: 1940-120-runs fine for a while , then sputters and quits
#13
Home away from home
Home away from home

David Baird
See User information
I also believe it is likely a fuel problem. Packard changed to non-vented gas caps in 1949. The vent, a notch, was built into the filler neck. Check to see if there is a vent in your cap. Another problem I have found was on a 1947 that had had the gas tank lined. It was done incorrectly and had pooled around the fuel pickup. When the tank was filled some of the fuel was able to get between the lining and the bottom of the tank. The car would suck that amount of fuel out and since the other fuel didn't get to the fuel pickup the car would die. After waiting fifteen or twenty minutes enough fuel soaked to the bottom of the tank and the car ran fine, (for awhile).
Good luck. Keep us posted on what you find.

Posted on: 2008/8/2 15:04
 Top  Print   
 


Re: 1940-120-runs fine for a while , then sputters and quits
#14
Just can't stay away
Just can't stay away

Dan Marrin
See User information
Thanks again for all of your collective help on this. I was able to really dig into this issue over the last couple of days, and discovered that my problem was indeed a fuel problem. Everything was fine from the tank all the way up through the fuel pump and then the culprit was discovered to be a clogged filter in the glass bowl just before the carburetor. The winners are Peter Packard and Flackmaster; is this a great site or what!

Posted on: 2009/3/11 20:04
Dan Marrin
Summers; Breezy Point, MN, Winters; The Villages, FL
'48 Sup8 conv, '48 Sup8Del LWB sed, '58 Hawk.
 Top  Print   
 




« 1 (2)





- The following Google Ad-Sense Advert helps fund the cost of providing this free resource -
- Logged in users will not see these. Please Join and Donate to help support the website -
Search
Recent Photos
Photo of the Day
Recent Registry
Upcoming Events
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved