Re: Kent Moore vibration damper remover & replacer tool
|
||||
---|---|---|---|---|
Home away from home
|
That which APPEARS to be a crack needs to be filed smooth. THe sharp angle can cause breakage.
Posted on: 2013/5/10 15:12
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Kent Moore vibration damper remover & replacer tool
|
||||
---|---|---|---|---|
Home away from home
|
IIRC the sleeve is only neded for INstallation, NOT removal. I used a piece of PVC or maybe it's water pipe as a sleeve.
Posted on: 2013/5/10 15:21
|
|||
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
Re: Kent Moore vibration damper remover & replacer tool
|
||||
---|---|---|---|---|
Home away from home
|
I would think you can put an arc weld bead in corner.
Posted on: 2013/5/10 16:18
|
|||
Riki
|
||||
|