|
Re: Reproduction parts
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
56 ignition switch bezels. Cut them from SS and polish. The oem pot metal bezels are very weak and often break. In my case i would'nt care if they had any printing on them or not.
Posted on: 2015/11/6 13:32
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Reproduction parts
|
||||
|---|---|---|---|---|
|
Home away from home
|
Adjustable front Torsion level links. I don't think anyone is making those anymore. Use the 56 geometry for the "ball" ends. Or offer just the adjustable shaft portion so that the customer can reuse his ball ends.
Posted on: 2015/11/6 13:37
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Reproduction parts
|
||||
|---|---|---|---|---|
|
Home away from home
|
Starter gear end housing for SIX volt starters. A beefed up version so that 6v owners can operate their starters on 12 v without worry of the housing to break.
Posted on: 2015/11/6 14:25
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
