Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Home away from home
|
Does anyone have a detailed photo of the door panel fastener (clip) for a 1946/47 Packard Clipper part #361929? Thanks
Posted on: 2016/2/6 19:56
|
|||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Forum Ambassador
|
Have been reluctant to post because I can't say for sure which is which. Both types were on various door panels thruout those years. I think the one that is formed sheetmetal might be the early one but .......
The sheet metal clip has a leg that is 3/4 long and wire leg is a little over an inch. The wide portion that retains in the door hole is approx 1/4 inch down from where inside of panel would be on both. The width of the part that fits thru the hole in door and retains is about 5/16 on the sheet metal type and 1/2 on the wire clip. The wire has plenty of give so will squeeze in. U shaped portion that slips thru the opening in the panel will accommodate a 1/8" thickness.
Posted on: 2016/2/7 14:36
|
|||
Howard
|
||||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Home away from home
|
The sheet metal style is the one that I have seen on original earlier door panels up to 1951 or so. Mixed styles after that.
Posted on: 2016/2/7 14:49
|
|||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Home away from home
|
Thanks for the response. I pretty sure the clip on the right in the photo is the correct clip. Having said that , I have seen both styles, and each fits a 5/16 hole. The question still remains which one is 361929?
Thanks
Posted on: 2016/2/7 16:08
|
|||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Home away from home
|
Quote:
I believe that the one on the right is 361929 which first appeared in 1941 and as noted in post #4 is the only type that I have seen on the earlier cars.
Posted on: 2016/2/7 18:37
|
|||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Just can't stay away
|
Not sure about the correct clip for specific Yr/model.
However having door panels off of a few Packards from 1930 thru 1956. Pardon I'm getting to detailed, the wire type of clips were used on all I've seen starting about 1935-6. Packard 385
Posted on: 2016/2/8 11:15
|
|||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Webmaster
|
On my '54, it used only these fasteners for the door panels:
Attach file: (5.06 KB)
Posted on: 2016/2/8 11:32
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Home away from home
|
Big Kev-- Your clip looks like the one on the right in Post 3. Is anyone selling these clips?
Posted on: 2016/2/8 18:02
|
|||
|
Re: Door Interior Panel Fastener
|
||||
---|---|---|---|---|
Home away from home
|
Big pdf catalog. Page 60 has these clips.
wesales.com/pdf/2013-14CATALOG.pdf
Posted on: 2016/2/8 20:05
|
|||
1952 Model 200 Deluxe Touring Sedan
HA's 52 Grey Ghost "The problem with quotes on the internet is you never know if they're true" - Abraham Lincoln |
||||
|