Happy Easter and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
105 user(s) are online (64 user(s) are browsing Forums)

Members: 1
Guests: 104

Ross, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal




Replacing wires in the 47 Turn Signal Controller
#1
Home away from home
Home away from home

Wesley Boyer
See User information
The wires in Turn Signal Controller are in bad shape so I figured I would replace them. How hard could that be?
Well it turns out you have no clear access to the connectors so it looks like splicing in on the old wires would do the trick. But since I've got it out this far, I might as well go all the way.
Wes

Attach file:



jpg  (225.97 KB)
1003_59cfac3c34280.jpg 1920X1440 px

Posted on: 2017/9/30 9:37
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#2
Home away from home
Home away from home

Wesley Boyer
See User information
First I drilled out the two pins. pulled it apart and took lots of pictures. then found out I had to drill out two more braded pins which looks like it might had been a mistake.
Wes

Attach file:



jpg  (240.59 KB)
1003_59cfae5375101.jpg 1920X1440 px

jpg  (158.31 KB)
1003_59cfae78483ae.jpg 1920X1440 px

jpg  (85.20 KB)
1003_59cfae93a2f97.jpg 1920X1440 px

jpg  (163.41 KB)
1003_59cfaf0e01ae4.jpg 1920X1440 px

Posted on: 2017/9/30 9:50
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#3
Home away from home
Home away from home

Wesley Boyer
See User information
Okay now that I got it apart, I'm thinking the far left bottom wire is suppose to be yellow, the one on the right side is the black wire and the one that is top on left side is the green with black traces on it. According to the wiring schematic.
Wes

Attach file:



jpg  (165.03 KB)
1003_59cfb0d7ea431.jpg 1920X1440 px

jpg  (190.52 KB)
1003_59cfb0e6ec09f.jpg 1920X1440 px

jpg  (149.89 KB)
1003_59cfb11052aab.jpg 1920X1440 px

Posted on: 2017/9/30 9:59
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#4
Forum Ambassador
Forum Ambassador

HH56
See User information
Wes, thanks for posting. I believe that same switch was used 42 thru 49 22nd series. Maybe on 41 Clippers too. Doesn't look too complicated so knowing what is inside should help many avoid replacing the switch. Is there enough clearance to put it back together with screws and nuts or will it need rivets again?

Posted on: 2017/9/30 10:16
Howard
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#5
Home away from home
Home away from home

Wesley Boyer
See User information
Howard, I'm thinking maybe pop rivets on the outside and maybe two small screws, taping threads for the inside. See picture with red arrows.
Wes

Attach file:



jpg  (153.28 KB)
1003_59cfbf03723b9.jpg 1920X1440 px

Posted on: 2017/9/30 10:58
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#6
Home away from home
Home away from home

Wesley Boyer
See User information
Okay, I got the wires replaced and inserted some pins. Next I braded the ends, don't look to good but I think it will hold.
I used the smallest pop rivets to hold the unit together and mashed the ends down a little more.
Checked it on the bench and electrical checkout checks good, mechanical checkout checks good. ready to be put back in.
I'm calling this done.
Wes

Attach file:



jpg  (135.28 KB)
1003_59d13249785a2.jpg 1920X1440 px

jpg  (128.75 KB)
1003_59d13284364ec.jpg 1920X1440 px

jpg  (165.77 KB)
1003_59d1329124a7a.jpg 1920X1440 px

jpg  (123.26 KB)
1003_59d132b9b52c1.jpg 1920X1440 px

jpg  (114.84 KB)
1003_59d132cb1c3b6.jpg 1920X1440 px

jpg  (139.16 KB)
1003_59d132e3be07e.jpg 1920X911 px

Posted on: 2017/10/1 13:25
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#7
Home away from home
Home away from home

Wesley Boyer
See User information
One last Before and After picture.
Wes

Attach file:



jpg  (144.39 KB)
1003_59d2490e7975e.jpg 1920X802 px

Posted on: 2017/10/2 9:11
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#8
Home away from home
Home away from home

Ernie Vitucci
See User information
Good Evening all...We have replaced the directional switch in our 1949 23rd series and it looks very similar if not the same as yours and has the same 1943 stamp on it. Ernie in Arizona...

Posted on: 2019/5/16 20:29
Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess'
 Top  Print 
 


Re: Replacing wires in the 47 Turn Signal Controller
#9
Forum Ambassador
Forum Ambassador

HH56
See User information
Quote:
We have replaced the directional switch in our 1949 23rd series and it looks very similar if not the same as yours and has the same 1943 stamp on it.


That is interesting because the 3 wire switch was used thru the 22nd series and while 23rd series 49 turn signal switches would look similar, they should be electrically different. According to the diagrams, that is the first year Packard had brake lights go thru the switch. Instead of the separate rear turn signal bulbs, 23rd and later series use the same bulb for brakes and turn signals. Those would need the 6 wire switch. I wonder if there was some kind of delay with turn signal changes just as there was when they made the R11 OD changeover after a few months production of the 22nd series. Does your car have one or two bulbs in the rear tail light housing?

Posted on: 2019/5/16 21:20
Howard
 Top  Print 
 








Search
Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved