Packard Forum Index » Post-War (1946-54)

Topic: Lug Bolt Torque for a 2362

Bottom

Previous Topic

Next Topic Register To Post

Ernie Vitucci

Lug Bolt Torque for a 2362

Home away from home

Good afternoon all...I should know, but do not know, what the correct torque is for the lug bolts on a 2362. I would think that they should be some place between 65 and 85 pounds feet, but for some reason I can't find it. Any help is appreciated. Thanks, Ernie in Arizona

Posted on: 2019/5/29 16:30

Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess'

HH56

Re: Lug Bolt Torque for a 2362

Forum Ambassador

There are some torque specs on page 47 & 48 in the Chassis section of the 46-50 SM. If you have wheels using 9/16 bolts it is given as 85-95 ft lbs.

Posted on: 2019/5/29 17:19

Howard

Ernie Vitucci

Re: Lug Bolt Torque for a 2362

Home away from home

Thank you Howard...I guess I went through that section too damn fast. I guess Miss Prudence is safe! She may be less safe coming home from the dentist in a couple of hours! Ernie in Arizona

Posted on: 2019/5/30 9:15

Caretaker of the 1949-288 Deluxe Touring Sedan
'Miss Prudence' and the 1931 Model A Ford Tudor 'Miss Princess'

Board index » Discussion » Post-War (1946-54) » Lug Bolt Torque for a 2362

Top

Previous Topic

Next Topic

	';
Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.