Packard Forum Index » Packard Parts & Misc - For Sale, Wanted, Trade

1941-2 Radio PA-362575
This radio looks good and all the tubes are there but I don't think it works. The tuner bar moves with the knob or the buttons. There is a hole in the speaker,
It comes with a new set of push buttons. Included are all the knobs that were in the box with it but I don't know if they are correct. $220 plus postage

1941-2 Deluxe Heater
This heater is like new. It does not appear that it has ever been installed. The lower door handle is cracked and the wiring insulation is brittle and cracked. $220 plus postage

Attach file:

---

  radio-heater 41aa.jpg (115.59 KB)


  radio-heater 41b.jpg (125.48 KB)


  radio-heater 41cc.jpg (121.97 KB)

Will take the heater if it will fit a 39 six. Let me know...if you know.lLooks like the one I pulled out but...
RJ Russell

It should fit but finish and color might be different. It seems to me that my 1939 had a darker crinkle finish but that was many years ago so I’m not sure. Incidentally, I might have a used unbroken handle.

I don't think this will fit without some modification. My 39 120 heater does not have the lower door. It also has two mounting bolts where this heater has three. The inlet/outlet pipes on the 39 both have 90 degree bends where this one has straight pipes.

I tried to look this up in the parts book but I can't figure out what heading it might be under. There is the number 11290 printed in ink on the back but I can't find that part # in the book.

Dimensions:
10.5" wide at widest point
9.5" high at center
7.5" from the front of the heater to the mounting bracket.
Three mounting bolts go through firewall.
It looks like there should be three spacers between the heater and firewall for clearance
The distance between the inlet & outlet is 10.25" O.C.

Let me check the size and attachments.
I’m pretty sure that the oultets through the firewall are straight....and pretty sure there were three attachment bolts.
Not quite sure why I want a heater in a car that will never be driven in cold weather ..or have the top raised but still installing a too and paid for new wiper arms amd blades too. LOL
Hopefully get all dimensions and pictures tomorrow.
thanks
RJR

Longjohn- Looks like your memory is better than mine. The heater on my 39 has two mounting bolts...apx 4” apart. The water tubes are bent but do go straight through the firewall on straight line 6” apart.
Guess I could make it fit but might be better to keep looking. Doubt I will find one as nice.
Attaching pictures .
Hopefully some one has one that looks better and works

Attach file:

---

  484FD192-BFD8-4EC9-8394-727C3697C788.jpeg (11.42 KB)


  ACFDE906-BBD5-4D01-91C0-C2DEA758DD31.jpeg (11.63 KB)

The heater has been sold. Thanks

The radio is sold, too. Thanks