R H	Re: RIk	#591
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	First time using this hf . made in italy 1980s mig Going to have to tack something to keep bracket from moving in. Need to tap end for bolt Attach file:   20220815_181027.jpg (184.46 KB)   20220815_191742.jpg (280.55 KB)   20220815_232359.jpg (231.48 KB)   20220815_192237.jpg (191.15 KB)   20220815_172619.jpg (228.61 KB) Posted on: 2022/8/16 2:07
	Riki

R H	Re: RIk	#592
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Lot less squeaks. I did make 1/4 spacers for lower stabilizer bar. Think the axle bushings are squeaking. So making a set. 80 ml is what they take. The 55. This is shore 94. The rest will be shore 80. And making the longer spacer which will be 2-9/16. 56 are 2-3/8. Long. Attach file:   20220818_164209.jpg (142.21 KB) Posted on: 2022/8/18 19:43
	Riki

R H	Re: RIk	#593
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Personally I like shore 94. Attach file:   20220821_112632.jpg (197.68 KB) Posted on: 2022/8/21 13:57
	Riki

R H	Re: RIk	#594
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Giving this racing 4.5 amp brake switch a try. Have 1 inch crows foot on order. Used a plumbing basin wrench. But its does not grip well. Attach file:   20220827_143738.jpg (133.17 KB) Posted on: 2022/8/27 17:24
	Riki

R H	Re: RIk	#595
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Today put the 94 shore bushings in. See how they do. Picture is of NOS bushing were on left side. The real bad one was forwards. The other near shock. And one with writing. Is flexane.been on the carb about 10 years. Believe that was the squeak. The curve over bracket shock mount and torque arm made the squeak. Attach file:   20220828_164103.jpg (182.64 KB)   20220828_164152.jpg (188.22 KB) Posted on: 2022/8/28 20:44
	Riki

R H	Re: RIk	#596
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Clock was stopping . it was going for months 24 .7. It would still work when car was moving . That arc is hot.. Melted solder. But trying solder on both contacts this time Attach file:   20220913_134731.jpg (145.85 KB)   20220913_141724.jpg (238.14 KB) Posted on: 2022/9/13 16:57
	Riki

R H	Re: RIk	#597
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	My replica of 55.56 antenna top. Chrome shop lost mine. This won't rust. Made from stainless .. The antenna shaft thread seems to be 4.40. Attach file:   20220917_170852.jpg (295.98 KB) Posted on: 2022/9/17 20:29
	Riki

R H	Re: RIk	#598
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Good stuff Attach file:   20220919_010339_(1).jpg (168.80 KB) Posted on: 2022/9/19 3:17
	Riki

R H	Re: RIk	#599
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	3d printer time. 1 might clean up but other is I think is toast Attach file:   20220920_123438.jpg (287.93 KB) Posted on: 2022/9/20 15:06
	Riki

R H	Re: RIk	#600
Home away from home Joined: 2012/4/10 21:35 Last Login : Today 11:22 From San Diego, CA USA Group: Registered Users Posts: 2582	Trying this conductive copper tape. Attach file:   20220926_173028_(1).jpg (280.34 KB)   20220926_173053.jpg (228.78 KB) Posted on: 2022/9/27 6:13
	Riki