Leaf spring gaiters
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Tuning up the rear suspension on my 120, trying to chase down a couple of issues. Working on the rear leaf springs.
Is there a way to remove the gaiters such that they can be used again, or is there a reproduction? It appears the top and bottom we’re essentially pressed together, and after 85 years on the car, they aren’t just going to slide apart. I know they are non-essential, but they were there originally, and I’d like to retain them. Thanks!
Posted on: 2022/10/30 17:43
|
|||
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|
Re: Leaf spring gaiters
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Posted on: 2022/10/30 18:00
|
|||
|
Re: Leaf spring gaiters
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks! Sent that from the garage, hadn’t googled yet. Got 1/2 of the first gaiter off, should be able to re-use it. Will post some pictures tomorrow.
Posted on: 2022/10/30 21:00
|
|||
1937 120 1092 - Original survivor for driving and continued preservation. Project blog / Registry
1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015 Project blog / Registry |
||||
|