markmdz	'37 6 Crankcase Breather tube?	#1
Just popping in Joined: 2017/1/25 15:00 Last Login : 4/30 10:47 From Newtown, CT Group: Registered Users Posts: 8	Can someone help with pictures and measurements for a 1937 6 cyl crankcase breather tube? I've resigned myself to the idea that I'll have to make one, considering I can't seem to find one for my car. Any help with pictures, measurements (or a source to find one) would be greatly appreciated. Posted on: 4/12 7:32

Owen_Dyneto	Re: '37 6 Crankcase Breather tube?	#2
Forum Ambassador Joined: 2007/3/14 18:01 Last Login : 11/17 18:26 From New Jersey Group: Registered Users Forum Ambassadors Posts: 16694	I don't have the data you want, but you should indicate which tube (inlet or outlet?) you need info on. Posted on: 4/12 9:59

Gary Kulp	Re: '37 6 Crankcase Breather tube?	#3
Quite a regular Joined: 2020/3/11 9:24 Last Login : Today 10:43 From 3072 Blackberry LN.,Malvern,Pa. 19355 Group: Registered Users Posts: 29	If you need the CYL. ventilator outlet tube,it is the same for all 120C,115C,1600 1,1A,1D,2, 1700 1,1A,2 1800 1,1A 1900 1,1A engines part no.333934 Superceded by 315430 Anyone selling a parts engine would probably sell you one or Kanters or Max Meritt or any of the parts venders. Posted on: 4/12 12:42

markmdz	Re: '37 6 Crankcase Breather tube?	#4
Just popping in Joined: 2017/1/25 15:00 Last Login : 4/30 10:47 From Newtown, CT Group: Registered Users Posts: 8	Thank you both for the replies and the info. I called both Jeff at Moose Motors and Mike at Max Merritt and left them voicemails. We shall see... Maybe I won't have to make one after all. Posted on: 4/12 16:03

BigKev	Re: '37 6 Crankcase Breather tube?	#5
Webmaster Joined: 2006/4/17 13:30 Last Login : Today 22:04 From North Aurora, IL Group: Webmasters Registered Users Posts: 11906	I'd check with Bob Stolfus in PA or Gerry at Packards Southwest in San Diego. Posted on: 4/12 18:07
	-BigKev 1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

Larry Reber	Re: '37 6 Crankcase Breather tube?	#6
Home away from home Joined: 2017/3/13 23:07 Last Login : 11/15 1:23 From Poulsbo, Washington Group: Registered Users Posts: 141	Also check David MOE Packard Seattle Posted on: 4/15 12:06
	Larry Reber

tsherry	Re: '37 6 Crankcase Breather tube?	#7
Home away from home Joined: 2011/1/21 0:49 Last Login : 11/18 21:54 From Spokane, WA Group: Registered Users Posts: 317	Are you looking for the outlet? I might have a spare if you need it. The spare inlet however is non factory on that engine. Posted on: 4/15 21:31

markmdz	Re: '37 6 Crankcase Breather tube?	#8
Just popping in Joined: 2017/1/25 15:00 Last Login : 4/30 10:47 From Newtown, CT Group: Registered Users Posts: 8	I've spoken to Mike at Max Merrit and Jeff at Moose Motors so far. They both have the tube. Thanks all for the suggestions. Posted on: 4/17 7:36

markmdz	Re: '37 6 Crankcase Breather tube?	#9
Just popping in Joined: 2017/1/25 15:00 Last Login : 4/30 10:47 From Newtown, CT Group: Registered Users Posts: 8	Apparently what I know as the 'crankcase breather tube' is regularly referred to in Packard-speak as the 'downdraft tube'. ...but yeah, I'm looking for the tube that mounts to the side of block on the passenger side right toward the back of the block and points downward. It looks like it would have a flange with one mounting hole to bolt it to the block. Posted on: 4/17 7:39

TxGoat	Re: '37 6 Crankcase Breather tube?	#10
Home away from home Joined: 2023/4/14 11:11 Last Login : Today 18:51 From 76481 Group: Registered Users Posts: 1048	Mine does have a flange with single bolt at the block, then the tube extends outward and curves 90 degrees, then straight down to a small bracket on the clutch housing. A picture would be very informative. One of the engine views in the various service and advertising materials in the archive might show it. Posted on: 4/17 14:33