Packard Forum Index » Project Blogs

Size difference

This is going to stand off 1/4 or so higher

Little more work than I wanted with this adapter.


Ford Explorer 2002-2004

Mercury mountaineer 2002-2004

Attach file:

---

  20240525_233601.jpg (3,961.82 KB)


  20240525_192034.jpg (3,330.05 KB)


  20240525_231541.jpg (3,844.54 KB)


  20240525_231554.jpg (4,239.47 KB)

Made it to ft Rosecrans.

Put window in. Used a Packard motor. I will say. It's more quiet than the after market.



Picture of motor is right side.

Had to change.. it.

Attach file:

---

  20240527_190630.jpg (3,811.17 KB)


  20240527_191755.jpg (3,336.86 KB)


  20240527_191610.jpg (4,529.48 KB)


  20240527_190457.jpg (5,184.32 KB)


  20240527_191544.jpg (4,270.53 KB)


  20240526_184306.jpg (3,787.22 KB)


  20240527_125611.jpg (3,494.91 KB)

Picked up this switch at auto zone.

The bezel. Someone used something. Might be silver solder.

Don't think it's solder.

But I could thread this on switch.

Only thing . Would be a spacer. And a bracket to hold switch from turning.

The bezel won't pull off.

Could also add an led behind bezel for a light.

Bezel with copper was thinking of using that locating part to hold switch. Don't think it will work.

Attach file:

---

  20240527_221751.jpg (1,306.03 KB)


  20240527_221357.jpg (3,815.49 KB)


  20240527_221152.jpg (4,203.35 KB)


  20240527_221134.jpg (4,456.05 KB)


  20240527_221102.jpg (3,746.60 KB)


  20240527_222953.jpg (1,033.68 KB)


  20240527_224555.jpg (631.57 KB)

Part Number: RDR-9010195

Summit heater core.

Attach file:

---

  rdr-9010195_xl-1.jpg (304.80 KB)

Removed auto park relay.

Not sure what the issue was. Except there were. Some broken connectors

And p.b. works. Now.

Put on/off switch for ignitor.

And replaced original starting relay with a. Cube relay

Found out. I have wiring. To start only in park.

Now. Figure out . How to make auto park. Reliable.
Jr

Attach file:

---

  20240627_183220.jpg (4,326.53 KB)


  20240627_183249.jpg (4,750.34 KB)

No. Spark.

F. It.

Points going back in.

Attach file:

---

  20240628_202049.jpg (3,479.58 KB)

Not to sure what vacuum advance I have.
Might be gm.

But I couldn't get condenser in.

I ground it back.

Now .. question. Was this part of my bucking?

Vacuum advance did work with ignitor. Not sure if it got hung up..


Think I have ground wire right

Attach file:

---

  20240629_163721.jpg (3,725.94 KB)


  20240629_165634.jpg (3,609.97 KB)