Packard Forum Index » Pre-War (1899-1942)

I don’t know what year tank you’re looking at but the one I have for my 1956 Clipper looks good, although I‘ve not yet installed it. Others have done so and are happy with it. The same tank is proper back to 1952 but also fits 1951 if you don’t care that he fill whistle is gone.

For sealer, I‘ve always used Hirsch gas tank sealer with excellent results. A tank I coated with it back in the ‘70s or early ‘80s still had the smell and color of proper gasoline when I drained it a few years ago even though it was too old to burn properly.

Thanks, the car is a 37 "120"

I don't have any experience with the reproduction tanks, so can't help there, but another option might be Gas tank renu. Link here I've used this in the past, with great luck, as have others on the site. It would remove all of the old Red Kote, and it is impervious to modern fuels. Whatever you choose, good luck!

The tank I recently sealed for my 1951 Henney-Packard, which is the 22nd-23rd series type with cut-down filler, had so many holes that the filler showed through in places. A couple needed a special putty but most were okay as they were and no need to fill them separately as the sealer is thick and dries hard while adhering well to a properly prepared inside. It took a lot of sealer and a hard outside coating in silver, painted black on top, but it came out pretty good and holds as it should.

DJP,

Is this the tank you're considering?

ebay.com/itm/185552853363