Packard Forum Index » Project Blogs

Topic: RIk's 56 ultramatic

Bottom

Previous Topic

Next Topic Register To Post

« 1 ... 73 74 75 (76)

R H

Re: RIk's 56 ultramatic

#751

Home away from home

Runs cool.

But still have the dry bearing sound

Really don't think it's the power steering pump.

I'm leaning to the speedometer..
The needle has been hanging up.

Man that might be a dash pull. To do it right. Will try the spray lube first.

And on to the waterpump bearing the have is longer. So the pump bolts show.
But I'm still an inch plus from radiator

It throws off the alternator. So I will have to Mill the slot longer. Maybe both.

Attach file:

20250222_163536.jpg (4,491.72 KB)

20250222_163517.jpg (4,351.69 KB)

20250222_163511.jpg (4,483.29 KB)

Posted on: 2/22 19:46

Riki

BigKev

Re: RIk's 56 ultramatic

#752

Webmaster

Just reach up and disconnect the speedo cable, then you'll know.

Also, you can probably pull the cable down and pull out the core to lube it without touching anything in the dash.

Posted on: 2/22 21:26

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

R H

Re: RIk's 56 ultramatic

#753

Home away from home

Thanks Kevin.

I should of while I was test driving.
.
But ,,,

Tomorrow's investigation..

Posted on: 2/22 22:01

Riki

R H

Re: RIk's 56 ultramatic

#754

Home away from home

Well that wasn't the problem.

Only thing left is power steering pump.

Posted on: Yesterday 19:23

Riki

Bob J

Re: RIk's 56 ultramatic

#755

Home away from home

Most of the time you can pull the belt and spin the various accessories and feel a bad bearing, that tell you anything?
Bob J.

Posted on: Yesterday 20:03

R H

Re: RIk's 56 ultramatic

#756

Home away from home

Thanks Bob

Not there yet.

Tomorrow having a friend listen. He heard a little today.
But was leaving

The brake lights decided to quit.. another thing to fix. Easy know the problem ..

Posted on: Yesterday 21:42

Riki

Pgh Ultramatic

Re: RIk's 56 ultramatic

#757

Home away from home

Hopefully you tried belt dressing already? Could be slipping

Posted on: Yesterday 22:08

R H

Re: RIk's 56 ultramatic

#758

Home away from home

Been thinking..

I'm now thinking another dampner came un vulcanized. If so that sucks.

Radiator pulling. But I will fix the gap. If that's is the case..

I do have a stack from Denver.

But, might as well get the original redone. . Should of .but didn't.

Have to find that place that vulcanize,s..

Posted on: Today 0:15

Riki