Packard Forum Index » V-8 (1955-56)

Thanks to


Spud, New filter when new tank put in.

I did an electric pump from rock auto. Working 4 psi.

All others are 5 and up.

A u tube video , guy made a vapor kit, for a 65 mustang.
They pressure the tank, at fill tube he has a fitting, runs a hose in trunk to a tube, he made, the outlet goes to air.

Once I get this filter it is a wix, I'll see what happens..

Here is another


youtu.be/oQd1locq8TM?si=8l43cWw0QM8AOiB8

Im going in at the rubber vent hose.

3/4 tee 1/4 adapter.

The gas really comes out, in steady stream. Vent tube is below filler.
So the gas has 2 ways to go, into tank or fill tube, and like things are, least resistance.

Of coarse, one could get creative, and 90 inside the tee shooting gas back to tank.

youtu.be/FZ5W53xrRZM?si=fuDdhMFNHZFmoT27

Be sure the filter is hooked up correctly.