Re: Lubrication Note
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Thanks for the correct info, I'll try to remember those details.
Posted on: 2009/5/29 13:19
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Hi Dave,
I'm having difficulty locating the Alemite oil nipples that you mentioned on this thread. Have you got a picture of the type you use or even better a supplier of the nipples and oil gun. Thanks Terry
Posted on: 2009/6/9 3:40
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Terry, the "oil nipples" you refer to are just ordinary Alemite grease fittings, at least that's what I found on the car and that's what I've continued to use - haven't even changed any of them.
The standard Alemite fittings have a small opening for the lubricant and behind it is a spring-loaded ball check valve. The needle tip of my oiler just pushes the ball check aside, allowing the oil to be forced in. I'm not sure if new pressure oilers like the kind I pictured are still in manufacture; I quickly browsed some of the better catalogs of machine equipment suppliers and didn't see any, but I can't call that an exhaustive search. And as I said, they are seen so commonly at flea markets. The maker of mine, Lincoln, was and may still be a large maker of lubrication equipment, many service stations here use their grease stations, gear oil pumps, etc. Perhaps a Google would yield some info. Sorry I couldn't be more helpful.
Posted on: 2009/6/9 8:24
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Might have a look at Restoration Supply.http://www.restorationstuff.com/Catalog/catalog.html
You'll have to download their catalog, but on the one I have from a few months ago (#26), starting on page 14 there is a good selection of fittings and various adapters for grease guns.
Posted on: 2009/6/9 9:36
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Yes, they do have a great assortment and one that hobbyists should become familiar with. But what i believe we were looking for was a pressure oiler such as pictured previously in this thread, or something equivalent.
Posted on: 2009/6/9 9:43
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
I know but in trying to be brief, skipped the details.
The reason I brought it up is we had to come up with something for a piece of medical equipment a few years back and wound up adapting a regular grease gun with a flex hose (old kind you put real grease in, not the cartridge type). Used a similar pointed adapter so it went into a fairly small hole. Worked very nicely to put in the needed oil under fairly substantial pressure. Don't remember the weight of oil but was thick enough the gun worked well. Thought the same principle might work here. EDIT: Of course, things like this are around if they would work. Not sure what they are calling high pressure or how much you need on those fittings you're working with. Not impressed with the plastic on this one but all metals can be found.http://grizzly.com/products/H7616
Posted on: 2009/6/9 10:01
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Forum Ambassador
![]() ![]() ![]() |
Great, that will no doubt help folks trying to find the equipment for the factory-recommended lubrication method. Needle tips for a grease gun, as shown on the picture of the oiler, are readily available, perhaps at a good local auto parts shop. Also look at MSC's item# 09119884 and McMaster's #1090K54.
Posted on: 2009/6/9 10:23
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
Thanks Fellas,
If they are just standard type grease nipples I can handle that. Just need to find the oiler similar to Daves. Terry
Posted on: 2009/6/9 14:36
|
|||
|
Re: Lubrication Note
|
||||
---|---|---|---|---|
Home away from home
![]() ![]() ![]() |
While searching for my roof material I stumble over these Alemite Straights at
Restoration Supply Company page 17. The ones on my car are the third one down on the left. Now only if I can find the roof moldings
Posted on: 2009/6/9 20:36
|
|||
|