Packard Forum Index » V-8 (1955-56)

Topic: Torsion Level Suspension Tool

Bottom

Previous Topic

Next Topic Register To Post

« 1 2 (3) 4 »

Craig Hendrickson

Re: Torsion Level Suspension Tool

#21

Home away from home

michaelk wrote:
Quote:

Beside my '56 Executive, I have a '76 Pontiac GP in Golden Anniversary trim...

Good taste in cars! I have a 1973 GP/SJ that is very restorable, but there's no market for that car right now (or even before). It does have a 455 w/TH400 and "Opera Windows" though.
Craig

Posted on: 2009/9/10 14:45

Nuke them from orbit, it's the only way to be sure! Ellen Ripley "Aliens"
Time flies like an arrow. Frui

BigKev

Re: Torsion Level Suspension Tool

#22

Webmaster

Here is the updated PDF with all the pages. Thanks to Jerry for sending over the missing page.

Attach file:

Size: 204.00 KB; Hits: 94

Posted on: 2009/10/11 13:25

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

jt fugere

Re: Torsion Level Suspension Tool

#23

Home away from home

I made a tool that works great using 5/8 All Thread and a few large washers

Posted on: 2009/10/26 16:47

Craig Hendrickson

Re: Torsion Level Suspension Tool

#24

Home away from home

Quote:

I made a tool that works great using 5/8 All Thread and a few large washers.

Call me a paranoid engineer, but I do not think that hardware store grade all thread, nuts and washers are strong enough for long term or multiple time use. Hence my use of grade 8 hardware and hardened link chain instead.
Craig

Posted on: 2009/10/26 16:57

Nuke them from orbit, it's the only way to be sure! Ellen Ripley "Aliens"
Time flies like an arrow. Frui

jt fugere

Re: Torsion Level Suspension Tool

#25

Home away from home

I agree yours is a safer method, I am a bit of a daredevil and after moving the car via flatbed, the all thread has bent and the car has lowered itself, this method works great to get the pins in and out quickly, however its for short term half retarded use. I currently have sockets sitting in the gap as my adjustable pins are being fabbed. Cheers!

Posted on: 2009/10/26 17:01

Packard Filip

Re: Torsion Level Suspension Tool

#26

Not too shy to talk

Does anyone happen to have a copy of the PDF containing the blueprint for the J-6065 tool? The PDF attached to post #22 has vanished over time.

I am aware that replicas are for sale, but the price adds up with shipping to Sweden. If I had the blueprints I could make my own replica of the tool at my workplace. Besides, it'd be fun to try.

Posted on: 2023/10/26 13:33

HH56

Re: Torsion Level Suspension Tool

#27

Forum Ambassador

I believe one of these is the one in the link but if not, do not know who originally posted them.

Attach file:

J-6065_Tool(2).pdf Size: 732.12 KB; Hits: 73

jpg

loadarmtool.jpg (150.01 KB)

Posted on: 2023/10/26 13:52

Howard

Packard Filip

Re: Torsion Level Suspension Tool

#28

Not too shy to talk

That PDF is exactly what I was looking for, thanks a ton!

Posted on: 2023/10/26 15:04

DavidPackard

Re: Torsion Level Suspension Tool

#29

Home away from home

Appears to be the known file name corruption during server migration. Seems some/many/all files with the extension ‘PDF’ were renamed to ‘dl_attachment.php’. You can download the PHP file and rename the extension to PDF. I think the original file name is lost.

dp

Posted on: 2023/10/26 16:53