Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Forum Ambassador
|
John, I ordered one from Max Merritt so you could try there.
Posted on: 2009/10/12 12:04
|
|||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Home away from home
|
Dave, thanks - I'll give Merit a try. Where did you get your generator-water pump belt? The one that was on the car when I bought it was so short I had to cut it to get it off. NAPA had one the proper width, but not in length (NBH 25-390537). I am using one of theirs but it is 3/4" wide instead of the 7/8" correct size (NBH 25-28522). John Ulrich lists them, but they are expensive. Any suggestions?
Posted on: 2009/10/12 12:19
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Home away from home
|
Northwestern Auto in Grand Rapids, MI got me the upper for my 41 non-Clipper, reasonably priced, earlier in the year. Their number is 616-241-5611. If there's a logistics problem with their shipping it , let me know and I can pick it up at lunch and mail it to you
Posted on: 2009/10/12 13:15
|
|||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Forum Ambassador
|
John, I bought my fan belt at NAPA. It is a Gates brand #TR30537 Green Stripe 22A1365
7/8" outside width and 5/8" inside width. Max M. has a belt as well for $75 and it looks like the same Gates Green Stripe version.
Posted on: 2009/10/12 14:49
|
|||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Home away from home
|
Dave, I'll ping on the NAPA online site and see what they show. I ordered the curved top and straight bottom radiator hoses from Max Meritt per your suggestion.
Bkazmer, thanks for your generous offer, but let me see what I can find here first.
Posted on: 2009/10/12 18:30
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Forum Ambassador
|
John I found that the Gates website lists the belt under part #TR30537 but neither # showed up on the NAPA site?
Posted on: 2009/10/12 19:19
|
|||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Webmaster
|
My local Kragen/Oreilly has that Gates part number for $32.99 according to the their website.
Also it shows that belt as being for a 58/59 GM Truck.
Posted on: 2009/10/12 19:57
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Webmaster
|
Also the search on Napaonline/PartsProSe shows this as the Napa equivalant to that Gates part-number NBH 2530537, $27.99
Belt Angle : 36 Notched Belt : Yes Outside Circumference (in) : 54.35" Outside Circumference (mm) : 1381 mm Section : W Top Width (in) : .9375" Top Width (mm) : 24 mm
Posted on: 2009/10/12 20:00
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: 21st Series 356 Top Radiator Hose
|
||||
---|---|---|---|---|
Home away from home
|
Kev and Dave, thanks. I will check with NAPA and O'Rilley's today and post my results. If I am successful in finding the belt I will post the numbers and source on the Packard Parts X-Ref section. I have had good luck with NAPA in the past, but lately I am finding O'Rilley's to be a better source for parts. Both have helpful counter people. I used to be able to decode the Gates belt and hose numbers, but not any more.
Posted on: 2009/10/13 10:37
|
|||
We move toward
And make happen What occupies our mind... (W. Scherer) |
||||
|