|
Re: Camshaft End Play
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Dear Bill:
.0025 to .006 should work Measured with a dial indicator placed on the sprocket. Pull the gear to contact, zero the dial, then push on camshaft center to determine end play. Adjustment is a problem because new parts are not available, and be wary of anybody who says they know enough about metallurgy to make one. That is if they can even say the word. On the other hand take them seriously because in today's trash culture being full of baloney seems to be the qualification most sought after.
Posted on: 2011/12/23 17:54
|
|||
|
||||
|
Re: Camshaft End Play
|
||||
|---|---|---|---|---|
|
Home away from home
|
Tim Cole Quote:
On the other hand take them seriously because in today's trash culture being full of baloney seems to be the qualification most sought after. Amen! Craig
Posted on: 2011/12/23 20:15
|
|||
|
Nuke them from orbit, it's the only way to be sure! Ellen Ripley "Aliens"
Time flies like an arrow. Frui |
||||
|
||||
|
Re: Camshaft End Play
|
||||
|---|---|---|---|---|
|
Home away from home
|
Quote: " and be wary of anybody who says they know enough about metallurgy to make one."
Amen Tim Cole. And that is exactly why we need to be in constant search of current production parts readily available at any auto parts chain. Even if such parts require machining or other mods/adapters etc.
Posted on: 2011/12/23 22:18
|
|||
|
VAPOR LOCK demystified: See paragraph SEVEN of PMCC documentaion as listed in post #11 of the following thread:f
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7245 |
||||
|
||||
|
Re: Camshaft End Play
|
||||
|---|---|---|---|---|
|
Just can't stay away
|
Thank you Tim for the info, i will check it out next year.
To all - Have a great Christmas ! Bill.
Posted on: 2011/12/24 12:51
|
|||
|
||||
