Packard Forum Index » General

Anyone have a part number for a power steering pump filter for a 1953 Pat. Mine is 3 3/8" wide and 2 " tall. Maybe napa
etc.
Thank You

I don't have a known good number anymore but hopefully someone does. If not, doing a search for power steering filter on their website, this is the smallest height Napa shows at almost 2 3/4". Outer diameter is good if the inner will work at around 1 3/8". IIRC, that may be a little large and I think also a little pricy at $32. They have many other sizes & some may work but their search wants an ID as well to narrow the options.

Max Merritt lists a 52-4 PS filter on his site for half that amount but his is only 1 1/2 high.

None of the other stores I could search without naming a specific more modern vehicle had anything except inline aftermarket filters listed.

Attach file:

---

  (32.59 KB)

I looked up cross ref to Wix filter Wix is 57557
HT-2.727
ID-1.162
OD-3.281
With the spring on the hold down screw I thick the HT may work. Inside is 1" on old filter. I'm going to keep looking