Re: doc's 1951 200
|
||||
---|---|---|---|---|
Webmaster
|
Take the ignition out, and take it to a lock smith. Then you are not paying for the house call.
Posted on: 2012/3/14 22:47
|
|||
-BigKev
1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog 1937 Packard 115-C Convertible Coupe -> Registry | Project Blog |
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Home away from home
|
Yeah, one key and I can open and operate everything, except my gas door. But, for now I have no need to lock my gas door, due to the fuel cell. I tinkered with the key for a while before I realized there was only one pin difference between "Glove box/Trunk" and "Ignition/Door". Mabey someone else can give it a try to verify that difference.
Posted on: 2012/3/14 23:09
|
|||
Garrett
1952 200 Deluxe Touring Sedan " If you don't go when you want to go, when you do go, you'll find you've gone"- Burt Munro |
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Just can't stay away
|
thank guys. so just to get this right, the glove box key will work for the ignition as well? i would feel better if i only have to take that out insteadof the ignition im clumbys and i like to break things
Posted on: 2012/3/14 23:53
|
|||
Packard on a budget
|
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Home away from home
|
Quote:
Doc, I own a '52, so I assume yours is the same way. Since you need the "glove box/trunk" key regaurdless, I'd get that done first. Also, if it works you can save your self some cash. From my experience, what you need to do to get it to work with your ignition and door locks, is push the key in all the way and pull it out slowly till you hear the first "click". At that point you should be able to turn the ignition and open your doors.
Posted on: 2012/3/15 0:06
|
|||
Garrett
1952 200 Deluxe Touring Sedan " If you don't go when you want to go, when you do go, you'll find you've gone"- Burt Munro |
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Just can't stay away
|
thanks gear rat you have been a great help.
Posted on: 2012/3/15 0:09
|
|||
Packard on a budget
|
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Just can't stay away
|
ok so i got the key made. it only goes to 45 degrees and wont crank the starter. did the guy make it wrong? or is their a push button start? Or is my wireing fucked. never started this baby with a key.
Posted on: 2012/3/15 15:19
|
|||
Packard on a budget
|
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Forum Ambassador
|
maybe i'm stupid, but i thought i remember hearing you just hit the gas pedal with key in the ignition and it starts. idk i could be wrong, but isn't it called gearstart?
Posted on: 2012/3/15 15:25
|
|||
1937 Packard 138-CD Deluxe Touring Limousine
Maroon/Black 1090-1021 [url=https://packardinfo.com/xoops/html/modules/registry/View.php?ID=232]1955 Packard |
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Home away from home
|
The key turns the ignition on- pressing the accelerator pedal activates the starter through a switch on the carb.
Posted on: 2012/3/15 15:28
|
|||
Joey
(?=#=?) "If chrome got me home, I'd for sure still be stuck somewhere." [url=http://pac |
||||
|
Re: doc's 1951 200
|
||||
---|---|---|---|---|
Just can't stay away
|
damn. thanks guy tried it and turned right over thanks guys.......... more than likely gumed up the carb had the fuel line hooked up. errrrr. oh well need to rebuild it any ways.
Posted on: 2012/3/15 15:34
|
|||
Packard on a budget
|
||||
|