Packard Forum Index » ZIS, ZIL, and other Packard Cousins!

I think, it would be the best from new on to post materials, ideas,photos and all the talks about these cars in this topic.
This topic should include cars:
ZIM GAZ 12
Pobeda GAZ M20
Volga GAZ 21
Volga GAZ 24
Volga GAZ 2410
Volga GAZ 3102
Although they are not directly Packard related, but still as I see the interest to these cars has grown and why not to
share the information whit people how have taken a interest.

I hope the administrators can move some posts from the ZIS-110 and Tsaika GAZ-13 topics to here, if its possible ore needed.

Thank you in advance,
Steve

Heres the translation to Johns GAZ M20 first poster:
Technical characters:
Seats: 5
Max.speed: 110 km/h
Fuel consumption over 100km: 13,5l

1.Rib cover for the radiator
2.Radiator
3.Air cleaner
4.Generator
5.Engine block
6.hub (don't know if its the right name in english, its the device that separates the ignition to the sparkplugs)
7.steering system
8.Starter
9.Gas pedal
10.Brake pedal
11.Clutch pedal
12.handbrake
13.Gears sifter
14.Seat forward switch
15.transmission overtake(don't know the exact name in english)
16.Transmission
17.Shock absorber

18.Steering wheel
19.Dashboard
20.Speedometer
21.Ignition lock/switch
22.direction ligths switch
23.Wipers switch
24.Clock adjustment switch
25.Hot Air switch?
26.Cigaret ligther
27.Headligths switch
28.? (Cant name it)
29.Carburetor choke
30.Rib cover switch
31.Ligths switch to full lights and back
32.Inside ventilation switch
33.Starter switch
34.Hood lock (opening switch)

If anyone sees a mistake ore wants to add something pleas do it. The second poster is a hard one I tell you, it will take more time.

Here are two more of the GAZ M20.

John F. Shireman

Attach file:

---

  (235.01 KB)


  (139.58 KB)

Here are the translations to the Second and Third poster that John posted. I had to ask Eric, to help me out whit the specific names for the instruments.
Thanks to Eric we got the translation done.


Engine technical characteristics:
Cylinders 4
Piston diamater(mm) and rod: 82x100
torque 3600 p/min

1.Water pump
2.Lifter (the thing that pushes the valves from the camshaft)
3.valve regulation
4.valve spring attacment
5.valve spring
6.spark plug
7.valve fitting (bronze)
8.valve
9.torque chamber
10.hub+rotor for igintion
11.cooling chambers
12.Piston finger( thats the estonian name for it, but take a look at the drawings)--Piston pin
13.rod bearing
14.Piston
15.sleeve
16.compression rings
17.Oil rings
18.(Holds the finger in place whit in the piston) Pin retainer
19.crankshaft seal
20.rod bolt
21.rod
22.(the things between the crankshaft and rod) Bearings
23.Rod cap
24.Oil pump
25.Oil out take
26.Oilpan
27.Oil film for the crankshaft
28.(the main thing that holds the crankshaft in place and the thing around it) Main Journal
29.Main Bearing
30.Key for crank gear
31.Crank gear
32.Camshaft gear
33.Camshaft

Third Poster:
Arrows point to the direction of the oil flow.

1.Secondary Oil filter
2.Oil filter element (paper filter)
3.Oil filter outlet
4.Oil channels
5.Oil channels in the crankshaft
6.Reduction/oil pressure seal
7.Oil pump
8.Oil pumps filter seal
9.Oil channels from the second filter
10.Main channel
11.Reduction/oil pressure seal
12.Handle for the secondary oil filter
13.filter elements
14.also filter elements?
15.Oil out take
16.also filter elements?
17.Oil level measurments rod
18.Main oil out take
19.oil jet for gear?
20-21.Crankcase ventilation tube
22.Oil cap from where new oil is poured in
23.Oil filler tube
24. Air cleaner

When I joined the forum I mad a promise to make some scanned copies of a book I have, but unfortunately the scanner my friend has is broken and I don't know when Is going to get a new one. I did some pictures whit the camera so I hope this is better then anything.
Heres some pictures of the GAZ 21 automatic transmission, It is indeed close to the Ford 3-speed Hydromatic.

Attach file:

---

  (52.95 KB)


  (71.67 KB)


  (69.03 KB)

Hardtop: Here are two more for you to translate.

John F. Shireman

Attach file:

---

  (277.22 KB)


  (172.21 KB)

Volga GAZ-21

Attach file:

---

  (143.48 KB)


  (113.13 KB)

betauser to Packard info.
Thous two GAZ 21 are really nice cars , they should be the second generation models (1958-1962), the first car should be the export version and the second car should be regular model for the Soviet market!

Heres a picture of the First generation GAZ 21 model:


source: www.volga.ee

GAZ-22 (1962-70)
Source: Russian Cars Forum

Attach file:

---

  (107.73 KB)


  (115.52 KB)

The GAZ 22 station wagon is rare these days, it reminds me a
Buick station wagon concept but none the less, dose it
make the GAZ 22 less valuable in my eyes!