Re:
|
||||
---|---|---|---|---|
Home away from home
|
Thanks
Nuts. Today I did the epoxy. It was messy.. On the water outlets. I need to ream. And use a I think 45 degrees cutter.
Posted on: 2021/9/14 22:26
|
|||
Riki
|
||||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Bill.
I have some valve stones somewhere. That I'm thinking of using with the mill. Not sure if they make a 45 degree to put on a boring bar.
Posted on: 2021/9/17 0:01
|
|||
Riki
|
||||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Riki,
Let me know, I might have a 45 degree cutter vs a stone. Bill
Posted on: 2021/9/17 17:14
|
|||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Pm.on the way
Posted on: 2021/9/17 18:40
|
|||
Riki
|
||||
|
Re:
|
||||
---|---|---|---|---|
Home away from home
|
Here is what that repair looks like with Lab Metal.
Posted on: 2021/9/24 9:16
|
|||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Looks great. .
Posted on: 2021/9/24 11:35
|
|||
Riki
|
||||
|
Re:
|
||||
---|---|---|---|---|
Home away from home
|
I decided to assess the coolant recover tank. There were rust throughs in the bottom of the tank, so I decided to section out the rusty area. It is interesting to see the internals. A lot more complicated than expected.
Posted on: 2022/2/12 11:35
|
|||
|
Re:
|
||||
---|---|---|---|---|
Home away from home
|
Apparently, a former California owner had developed a leak in the tank and decided to pour some sort of sealant in it to stop the leakage. Even put a large self-taping bolt with some type of patch on it to seal a larger hole. No wonder it rattled when I shook it. Guess it's time for the blaster and some welding.
Posted on: 2022/2/12 11:39
|
|||
|
Re: '38 1608 V12 Project
|
||||
---|---|---|---|---|
Home away from home
|
Wow.
Bill... I.ll get that reamer back to you soon.
Posted on: 2022/2/12 16:21
|
|||
Riki
|
||||
|