Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Recent Comments
Who is Online
67 user(s) are online (49 user(s) are browsing Forums)

Members: 1
Guests: 66

r1lark, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal



« 1 ... 75 76 77 (78)

Re: Stewart's 1955 Packard 400
Home away from home
Home away from home

Marty or Marston
See User information
If I were to try and make one,I would spray the metal dash (not the gold colored piece)with something like 3M Spray Adhesive and glue the cloth material to the metal dash. Allow it to completely dry. You should be able to use an Exacto knife and easily cut out the areas with the holes.

Good Luck with your project.

Posted on: 5/29 17:00
 Top  Print 
 


Re: Stewart's 1955 Packard 400
Home away from home
Home away from home

PackardDon
See User information
I'll take one too! Anyway, I wonder if that's something that Olson's Gaskets might be able to replicate and keep a pattern for future use. They've made some unusual items for me and in come instances they were so unusual that I had to source and supply the material.

Posted on: 5/29 21:13
 Top  Print 
 


Re: Stewart
Home away from home
Home away from home

Stewart Ballard
See User information
Does this lower radiator sill bolt to the bumper brackets?
If so I'll have to dig the bumper out of its long slumber because they are still attached.

Attach file:



jpg  20210609_172917_resized.jpg (392.89 KB)
5209_60c2a6bc56102.jpg 1328X747 px

Posted on: 6/10 17:58
Stewart Ballard
 Top  Print 
 


Re: Stewart
Forum Ambassador
Forum Ambassador

HH56
See User information
If memory serves, for the actual support the splasher bolts to the inner fender splashers on either side of the radiator cradle via the 5 holes at the rear (arrows) and nothing support wise is to the bumper bars. For those holes, there should be some large sheet metal type bolts that come up from the bottom into some speed nuts.

For anything that might be in front you could look at the bumper itself or the bars for small fairly thin bent tabs. I think there may be a nut and bolt which goes thru the holes in the front of the splasher (circles) into the tabs and are just vibration suppression. If it does bolt, that can be done after the bumpers are on.

56 has a rubber lip as a gravel shield in the depressed center section, I think held by staples, that lightly touches the inner bumper but I don't know if that was on the 55.

Attach file:



jpg  5209_60c2a6bc56102.jpg (401.61 KB)
209_60c2b34129a6c.jpg 1328X747 px

jpeg  IMG_1351.jpeg (192.52 KB)
209_60c2b34f4c33c.jpeg 1280X960 px

Posted on: 6/10 18:50
Howard
 Top  Print 
 


Re: Stewart
Home away from home
Home away from home

R H
See User information
Like h said. The fenders mainly. Hold it up. / grill

2 tabs one each side. Bolt to bumper bracket.

Attach file:



jpg  20210610_181955_HDR.jpg (5,065.70 KB)
4498_60c2baee85558.jpg 4624X3468 px

Posted on: 6/10 19:17
Riki
 Top  Print 
 


Re: Stewart's 1955 Packard 400
Home away from home
Home away from home

Stewart Ballard
See User information
Thanks guys that all make since to me now. I have a bunch of pics that KevinAZ sent to me a few years ago and now I can see that he had the fenders on the car. I just assumed that it bolted to something below it not above it.

Posted on: 6/10 19:27
Stewart Ballard
 Top  Print 
 




« 1 ... 75 76 77 (78)




Search
Recent Photos
Photo of the Day
1955 PACKARD CARIBBEAN CONV
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2021, PackardInfo.com All Rights Reserved