clutch cover
|
||||
---|---|---|---|---|
Home away from home
|
Are there supposed to be any small holes in the very bottom of the clutch cover?
Posted on: 2013/10/3 20:42
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Forum Ambassador
|
Mine has a single hole about 1/4" diameter.
Posted on: 2013/10/3 20:49
|
|||
Howard
|
||||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Home away from home
|
Thanks Howard,
Somebody made several in mine.
Posted on: 2013/10/3 21:37
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Forum Ambassador
|
The weep hole is allow any small amounts of oil that might pass the rear seal to drain out.
Posted on: 2013/10/4 7:46
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Home away from home
|
Howard,
It looks like your missing two bolts at the front of your Clutch Cover. Wes
Posted on: 2013/10/4 8:44
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Home away from home
|
Yes, I know the feeling, my dad took the Packard that I have now apart and put it back together and I keep wondering if this or that is the right bolt and if something was run in right direction.
Posted on: 2013/10/4 9:59
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Home away from home
|
While we are on this topic, is the cover supposed to have a gasket? The parts book lists "felt" ?
Posted on: 2013/10/6 0:21
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Home away from home
|
No gasket that I know of, but the plate between the oil pan and clutch cover (that mounts on the clutch cover) has a felt pad on it.
Look at my video on youtube about 12 minutes in. youtube.com/watch?v=OYgjdjANeVk Wes
Posted on: 2013/10/6 9:40
|
|||
|
Re: clutch cover
|
||||
---|---|---|---|---|
Forum Ambassador
|
There is a halfway decent photo of the assy at plate 91 in the 48-54 parts manual. I don't believe there is a gasket between the upper and lower covers. I think the felt they refer to is a strip maybe 1/4" wide which fits in the groove on that small vertical sheet metal filler piece at the front of the bellhousing
Posted on: 2013/10/6 9:45
|
|||
Howard
|
||||
|