Packard Forum Index » Post-War (1946-54)

I am currently looking at a 54 Clipper sedan, drivers floor pan bad, are there available pans or do I need to search salvage yards? Thanks in advance!

NOS drop in floor panels are most likely extinct and I wouldn't hold my breath for any really good salvage cars. They all seem to rust in the same areas but in different amounts.

You might check out Classic 2 Currenthttp://www.c2cfabrication.com and see if they have what you need. Their panels are not perfect but are a starting point and will need some nips and tucks to make fit. Probably the only thing around short of the extreme luck in finding a parts car with better metal than what you have.

Several on the forum have used C2Cs panels and if you do a search you will probably find some blogs. BigKev used them on his 54 and IIRC there are some photos showing what he had to do.

G'day Clipper54,
to PackardInfo.

If you buy the '54 Clipper Sedan I invite you to include it in the Packard Owner's Registry.

Thanks so much for the info Howard!

Invite appreciated Mal, will definitely take you up. I had been looking for another '51 300, my first. Made me love them even more!

Agreed, Classic 2 Current. I have used read lower quarters, front fender panels, Front, mid, and rear pans.

Again, not a perfect drop in fit, you will need to nip and tuck here and there and make final fit finish but they work great.