Happy Thanksgiving and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
89 user(s) are online (85 user(s) are browsing Forums)

Members: 0
Guests: 89

more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



(1) 2 3 4 ... 15 »

'38 1608 V12 Project
#1
Home away from home
Home away from home

blue40devil
See User information
Well, I have decided, after some encouragement to start a blog on getting my 1608 7 passenger touring on the road again. I bought it over a year ago, and thru the help of the club have been able to contact a previous owner from the 70's and determined the owner before him had moved and passed on. Big blanks prior to '70 and after say '78. Based on the CA inspection sticker it was last on the road in 72.

I wanted a BIG car to fit the kids and grand kids in, wanted a V12, sidemounts, luggage rack, Trippe lights etc. and didn't have open Twelve money, so this is what I have. Plan is to make it a wedding event car for when I retire. The car had a weigh scale ticket that read 6,110#'s

Car was very complete and had original interior and paint, but unfortunately, I don't think either is salvageable. The roof was out of it, probably due to an electrical short in the dome light. Only has surface rust and the bolts are amazingly unseized. Love California cars. Seller listed it as Green and when I got it, it turned out to be faded Centennial Blue.

I was at Hershey and found one of the last missing things, and there were not many, the Senior Grooved hood handle. A club vendor was able to supply the other one, so that is behind me.

Attach file:



jpg  (39.34 KB)
181435_5db437439ea1b.jpg 600X450 px

Posted on: 2019/10/26 7:13
 Top  Print   
 


Re: '38 1608 V12 Project
#2
Home away from home
Home away from home

blue40devil
See User information
Here is the car on arrival at my house in the Atlanta area. Had to get a roll back to unload from the carrier. Those over the road car haulers are amazing. Took a couple months to get the car here.

Lots of intrigue as the Russian owner left the country and I didn't have the car yet. All worked out, but was a little unnerving.

Attach file:



jpg  (322.18 KB)
181435_5db43b086a568.jpg 1920X1081 px

Posted on: 2019/10/26 7:27
 Top  Print   
 


Re: '38 1608 V12 Project
#3
Home away from home
Home away from home

blue40devil
See User information
I got out of sequence, this is the over the road, coast to coast hauler.

Attach file:



jpg  (242.13 KB)
181435_5db43c28d61b1.jpg 1920X1081 px

Posted on: 2019/10/26 7:29
 Top  Print   
 


Re: '38 1608 V12 Project
#4
Home away from home
Home away from home

blue40devil
See User information
First thing I did was try to turn the, "Ran When Parked" engine over with, not unexpended failure. I had pretty much decided to take it out and go thru it, but hoped it would have been less involved.

So, I purchased gallons of Kroil, WD 40, PB Blaster, marvel mystery oil, etc and flooded every thing for about 6 months.

I partially disassembled the top of the engine, carb, manifolds, valley cover and found some stuck valves which I was able to free up.

In talking to the PA he said he had to have the factory aluminum heads welded in the '70's due to leaks, which is what prompted him to sell it. When I got it, the aluminum heads had been replaced with cast iron ones, but there was evidence that it still had some leak issues.

Picture is of the engine as it arrived.

Attach file:



jpg  (35.05 KB)
181435_5db43e9f0aa71.jpg 600X450 px

Posted on: 2019/10/26 7:39
 Top  Print   
 


Re: '38 1608 V12 Project
#5
Home away from home
Home away from home

blue40devil
See User information
I decided to go thru the engine and do the valves, silent blocks, new heads, basically the gaskets, cosmetics and ancillaries.

To get to the engine, I removed the fenders hood and radiator and grill surround. Much easier to get to the engine.

Picture is of disassembled top of the engine. Ran a die over the head bolts and the threads were stretched, so I will have to replace them. I guess the PA thought some extra torque on the cast iron heads would be good.

Attach file:



jpg  (288.52 KB)
181435_5db4406196c76.jpg 1920X1081 px

Posted on: 2019/10/26 7:47
 Top  Print   
 


Re: '38 1608 V12 Project
#6
Home away from home
Home away from home

blue40devil
See User information
The valves came out easily with a big "C" valve spring compressor. Only problem was the forked end of the clamp had an offset that prevented getting to the retention collar, but I just moved it onto the spring and was able to compress them enough to free the thru valve, "HAT" retainer with a magnet.

I have a dedicated table that I am laying everything out in order that the 15,000 parts (so I am told) in the valve system are organized.

I moved on to the silent blocks and determined, with some international club members help, that the valve guides had to be removed first.

To get them out you first have to determine how they were installed. Picture shows a guide with the "C" retainer clip and the spring seat.

Attach file:



jpg  (155.41 KB)
181435_5db442cf0d9cb.jpg 1885X1060 px

Posted on: 2019/10/26 7:57
 Top  Print   
 


Re: '38 1608 V12 Project
#7
Home away from home
Home away from home

blue40devil
See User information
Here is the partially disassembled valve valley.

Attach file:



jpg  (191.33 KB)
181435_5db4434da6e25.jpg 1080X1920 px

Posted on: 2019/10/26 8:00
 Top  Print   
 


Re: '38 1608 V12 Project
#8
Home away from home
Home away from home

blue40devil
See User information
To remove the guide, I had to use a piloted drift that I got from Harbor Freight. I think I used the 5/16" one.

Because of the fact that the "C"clip keeps the guide from being pulled out of the engine and to remove the spring seat, I found I had to drive the guide into the valley about 1/4". This leave space to pry the spring seat off with a pair of flat blade screwdrivers.

DO NOT TRY TO REMOVE THE GUIDE WITHOUT REMOVING THE CLIP. There is not enough clearance to push the guide into the engine and you will be unable to pull it out without damaging or breaking something.

This gives access to the "C" clip which I was able to lever off by using a flat blade screwdriver under one of the open ends of the C and after dislodging it from its groove, worked it around to the other end. Most popped off once I dislodged it from the groove.

Picture is of the guide, clip and spring seat driven off the block.

Attach file:



jpg  (265.91 KB)
181435_5db44623eb5c8.jpg 1920X1081 px

Posted on: 2019/10/26 8:12
 Top  Print   
 


Re: '38 1608 V12 Project
#9
Home away from home
Home away from home

West Peterson
See User information
When I was editor of Cars & Parts, we did an excellent series of articles on the rebuilding of the Packard Twelve engine by Dale Adams. If you send me an email, I will send you the whole series of digital files. There may be some very useful information to help you on your journey of rebuilding.

StelvioGT@yahoo.com

Posted on: 2019/10/26 8:45
West Peterson
1940 Packard 1808 w/Factory Air
1947 Chrysler Town and Country sedan
1970 Camaro RS

packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=4307&forum=10

aaca.org/
 Top  Print   
 


Re: '38 1608 V12 Project
#10
Forum Ambassador
Forum Ambassador

Owen_Dyneto
See User information
I fully agree with West, the Dale Adams series was outstanding, both for the Packard V12 specifically, and also just for general principles. Unless you are already very familiar with the Twelve, you should absolutely read thru the articles before going much deeper into your engine. Take West up on his offer, or I think this link will take you to the series of articles:

daleadamsenterprises.com/packard1.pdf

That's a great car you've got there, I'm going to very much enjoy following your efforts with it. Best of luck.

Posted on: 2019/10/26 8:55
 Top  Print   
 




(1) 2 3 4 ... 15 »





- The following Google Ad-Sense Advert helps fund the cost of providing this free resource -
- Logged in users will not see these. Please Join and Donate to help support the website -
Search
Recent Photos
Photo of the Day
Recent Registry
Upcoming Events
32nd Annual Florida Packard Club Meet
01/26/2025
46th Annual Texas Packard Meet
04/03/2025 - 04/06/2025
Packard Salon - Calling All Twelves
05/27/2025 - 05/29/2025
58th Annual National Meet
05/31/2025 - 06/06/2025
AACA Fall Meet (Hershey)
10/06/2025 - 10/10/2025
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved