Packard Forum Index » Pre-War (1899-1942)

Do you have any recommendations for someone to rechrome plate a Trico wiper motor?

I polished the one on my 1950 to a near chrome appearance. Just used a buffer and polishing compound.

If you really want it chromed I would contact the guys who do the rebuildshttps://rebuildingtricowipers.com and see if they have a recommendation or if they could do it. Some types of prep or plating if done incorrectly could damage the motor to the point it would not work again.

The first thing I did was talk to the wiper rebuilding service. I figured it had been chrome plated at one time so I thought it could be done again. It would probably need to be mask off inside by someone that knows what they are doing. I thought you guys may have some experience with a chrome plater that could plate it back to original without destroying it. Thanks again

Chrome shop would easily plug the holes with a rubber stopper. Brightworks up on Piqua is certainly capable.
http://brightworkrestoration.com/about/

Librandi in Harrisburg is who I usually use.

Quote:

I don't know what year we're talking about but these were generally never chrome plated from the factory so if yours once was, perhaps it was aftermarket. That could be why the answers are referrals.

No chrome would be easier. Where they painted or natural pot metal finish in 1932? Thanks.