Happy Easter and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
111 user(s) are online (76 user(s) are browsing Forums)

Members: 1
Guests: 110

pmhowe, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal




1937 120 Center Dash Panel
#1
Home away from home
Home away from home

Pack120c
See User information
Hi Everyone,

I am hoping some of the 1937 120 fans out there can help with this. How does the bright work surrounding the center gauge cluster attach to the wood grain panel?

The five little "nubs" on the back of the bright trim are not threaded for a screw and are very shallow. I am not sure if I disassembled this or someone else but how it came apart is lost to time. Photos attached. Appreciate your help.

Attach file:



jpg  20211018_184718.jpg (182.75 KB)
769_616e0cebf21bd.jpg 1920X864 px

jpg  20211018_184530.jpg (172.89 KB)
769_616e0d19c8303.jpg 1920X864 px

jpg  20211018_184541.jpg (225.13 KB)
769_616e0da9ee54e.jpg 1920X864 px

jpg  20211018_184619.jpg (176.09 KB)
769_616e0dcf668ea.jpg 1920X864 px

Posted on: 2021/10/18 19:15
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#2
Forum Ambassador
Forum Ambassador

HH56
See User information
I don't have a car that old but I would almost bet that it originally had some studs on the chrome casting that went in the holes in the dash metal and the entire piece was held by speednuts that captured the studs. The back of the casting looks as if there might have been a broken off stud at each corner and in the middle right in the center of the protrusions at the circled spots. The holes in the dash look too small for a screw but not studs.

Packard used this attachment method on many other trim pieces, emblems and scripts. Many times, if someone is unaware of this configuration they try to pry the piece off and the studs break or pull off the casting in the process.

The other photos show the rear of a script with the studs intact and a selection of typical speednuts. In addition to the flat nuts shown Packard also used round speednuts as well as push in tubular types that could have been inserted in the holes in the dash metal with the studs on the casting pushing into those.

Attach file:



jpg  769_616e0dcf668ea.jpg (180.95 KB)
209_616e145147d32.jpg 1920X864 px

jpg  769_616e0d19c8303.jpg (175.49 KB)
209_616e145be2be2.jpg 1920X864 px

jpeg  IMG_2502.jpeg (30.20 KB)
209_616e14674760f.jpeg 1280X266 px

jpg  speed nuts.jpg (90.85 KB)
209_616e148735f8a.jpg 1420X1020 px

jpg  tubular speednut.jpg (83.69 KB)
209_616e172879fc7.jpg 1512X1042 px

Posted on: 2021/10/18 19:45
Howard
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#3
Home away from home
Home away from home

Pack120c
See User information
Thanks Howard. Your wealth of knowledge never ceases to amaze me. We may have to rig up something as I don't see any studs in the collection of old hardware from disassembly. The next question is how to attach studs to the back of the cast bright work?

I found another photo on the internet from a restoration blog about 10 years ago. There is no protrusion in the back or evidence of speednuts. The holes on the corners and in the center appear to be flush with the metal dash with some sort of tacking. Hmmm.....

Attach file:



jpg  1153_4f0506a971515.jpg (31.90 KB)
769_616f592576b97.jpg 600X450 px

Posted on: 2021/10/19 18:48
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#4
Forum Ambassador
Forum Ambassador

HH56
See User information
It is possible instead of studs they actually had small nubs that went thru the holes and was then peened over -- sort of like a rivet.

Probably no easy way to add studs or screws because there is no room for a blind threaded hole in the thin casting.

Do the gauges and other items that go thru the casting have something in their mounting that would add some pressure to the casting and help keep it in place? If so I wonder if a high strength double sided trim or emblem tape such as used on modern cars could be placed on the back of the casting to stick the sides to the center panel without being so thick it would hold the casting noticeably away from the panel.

Posted on: 2021/10/19 19:24
Howard
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#5
Home away from home
Home away from home

bkazmer
See User information
two faced foam acrylic mounting tape may let you attach this. You'd need a thinner type than typically used for bodyside moldings. 3M supplies it industrially

Posted on: 2021/10/20 2:02
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#6
Home away from home
Home away from home

ElGroucho
See User information
I tapped mine with a #4/40 bottoming tap and screwed it on. You just have to be very careful that you don't poke through the front. That pot metal is soft so make sure you start nice and straight from the get go as well.

Posted on: 2021/10/20 12:29
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#7
Home away from home
Home away from home

Pack120c
See User information
Thanks Gents for your suggestions. We have a few options now to consider.

Posted on: 2021/10/20 12:46
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#8
Home away from home
Home away from home

Bob J
See User information
Just verifying the fact that the panels are held in by cast in studs that are peened over for assembly. I just disassembled my dash on my 37 Coupe Convertible 120 and that is evident on mine. Likely these broke/drilled out for removal for the plating process. I agree that the use of foam double sided tape or a series of small dabs of a urethane adhesive will be your best reassembly method.

Posted on: 2021/11/5 18:30
 Top  Print 
 


Re: 1937 120 Center Dash Panel
#9
Just can't stay away
Just can't stay away

DJP-37-120
See User information
I would try a product called "Q-Bond", it is an ultra strong adhesive powder that you add a harderner to and is rock hard in 10 seconds.Just overlap it on the back side of the panel and the chrome center piece and no drilling needed. It is available at many auto parts stores and I'm sure online. I've used it in similair situations and was very pleased with it.

Posted on: 2021/11/6 18:54
 Top  Print 
 








Search
Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved