Merry Christmas and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
72 user(s) are online (61 user(s) are browsing Forums)

Members: 0
Guests: 72

more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



« 1 ... 45 46 47 (48) 49 50 51 ... 64 »

Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Webmaster
Webmaster

BigKev
See User information
I always recommend a battery cut-off switch on an old car, especially if it has any existing "ancient" wiring.

There are too many instances of cars catching fire in storage. Rodents love wiring and are not very good about disconnecting the battery before chewing on them.

It also eliminates any parasitic drain that may cause dead battery, especially if your car has a clock.

On our '37 convertible, it's on the floor right behind the seat. So it takes all of 5 seconds to reach down and turn it on or off when getting in or out of the car.

I have one I need to install in the '54. For the last 15 years, I've always popped the hood and pulled the positive cable off the battery, which I keep loose enough to wiggle it off. But I will probably install that on the firewall above the pedals somewhere.

Posted on: 9/11 14:54
-BigKev


1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

kevinpackard
See User information
I need to do the same. Just haven't found a good spot for it on the '54. The place that others have used (firewall, far right side of the engine bay) is already taken up with something else. So I need to find another solution.

-Kevin

Posted on: 9/11 17:04
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Mounting behind the seat wasn’t an option for me since my car is a limo. The seat back doesn’t move and mounts right to the divider.

I thought about mounting on the firewall, but really didn’t like where that put things on the engine side. It would have been right next to the voltage regulator and since I was switching the negative (hot), it put the connections in a spot where it would be way too easy to get up against accidentally.

So, the bracket I had made works great. It isn’t as convenient as being inside the cabin, but it is MUCH more convenient than under the seat on the battery. Also, this was a way of doing it without permanent modifications to the car.

Posted on: 9/11 17:44
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Got to tinkering in the garage and decided to once again investigate the operation of my heater and defroster switch/rheostats. Only one of which is correct for the car (thanks to Flackmaster for confirming). That’s okay as I have another correct one on the way and the better of my two existing was a correct one.

The existing correct switch was pretty rough in its operation, not smooth, not consistent electrical resistance, you name it. So, I disassembled and cleaned thoroughly. I then confirmed that the resister coil was 1.7 ohm end to end, which is about what I was expecting.

Here’s where it gets interesting. When I put it all back together, I had between 28 to 30 ohms across the terminals when adjusting through the range. Hmmm….

So, I ohmed out the resistor coil again…1.7 ohms end-to-end. Then ohmed the swipe contact to its terminal…0.1 ohm. So far so good. Then, I ohmed from the end of the resistor coil to the other terminal…..28 ohms. Now this point is connected by a brass rivet and everything is very solid physically. So, I then ohmed from the resistor to the terminal side of the rivet (not the terminal)….0.1 ohm. Aha! Next I ohmed from terminal side of the rivet to the terminal….28 ohms.

I now had a solid conclusion. After 87 years, there is a build up of crud/corrosion between the very solid physical connection of the rivet and the terminal. So, I got out the soldering iron and soldered the rivet and the terminal….Problem solved.

I should have taken pictures before I soldered, but didn’t think of it…here’s the after picture, though.


Click to see original Image in a new window



Click to see original Image in a new window

Posted on: 9/16 22:36
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Ross
See User information
Congratulations on diligently finding the real problem. This not too unusual and I have often seen it in overdrive relays--their symptom is usually that they will not work when hot. Soldering over the rivets is a good solution.

Posted on: 9/17 6:49
 Top  Print   
Like (1)
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Forum Ambassador
Forum Ambassador

HH56
See User information
Also can be an issue in 51-6 headlight switch rheostat sections. Symptom there is instrument lights will not come on and the quick fix of rapidly turning the knob back and forth does not do much if anything to make the lights start working.

Posted on: 9/17 9:00
Howard
 Top  Print   
Like (1)
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

TxGoat
See User information
Heater fan rheostats get hot when in operation, and that often causes problems with loose connections and corrosion. The resistive element is an alloy wire that often develops problems where it connects to the terminals. Solder may make a permanent repair, or it may not. Heat and dissimilar metals don't get along well in low voltage electrical circuits. The same issues plague dash light dimmer rheostats.

Posted on: 9/17 9:01
 Top  Print   
Like (1)
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Today was the day to work with my brother-in-law on my car. We replaced the front coil springs, lower support arm bushings, and center crank arm and bearings. The new springs corrected the vast majority of the tilt that my car had. Most likely, I will need to replace the rear leaf springs to correct that last little bit of tilt. I also need to have the rear shocks re-built. That will likely be a winter project.

In the meantime, my car drives MUCH better. It’s almost unbelievable how much of a difference it made.

Click to see original Image in a new window



Click to see original Image in a new window



Click to see original Image in a new window



Click to see original Image in a new window



Click to see original Image in a new window


Here are a couple pictures of the center crank arm ball….it was pretty worn. Thanks to Flackmaster for a NOS crank arm.

Click to see original Image in a new window



Click to see original Image in a new window

Posted on: 9/24 19:16
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Webmaster
Webmaster

BigKev
See User information
All you need now is the optional swaybar and you be ready to take it through a road course track!

Posted on: 9/24 19:33
-BigKev


1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog
 Top  Print   
 


Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Home away from home
Home away from home

Don B
See User information
Quote:

BigKev wrote:
All you need now is the optional swaybar and you be ready to take it through a road course track!


Haha…I do believe I have one or two other items to take care of first….re-woodgraining the dash and trim pieces, re-wiring the dash after the woodgraining, new rear floor pan, body work, upholstery, oh….and a roof would be a small plus.

Posted on: 9/24 19:59
 Top  Print   
 




« 1 ... 45 46 47 (48) 49 50 51 ... 64 »





- The following Google Ad-Sense Advert helps fund the cost of providing this free resource -
- Logged in users will not see these. Please Join and Donate to help support the website -
Search
Recent Photos
Photo of the Day
Recent Registry
Upcoming Events
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved