Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  


Remember me

Lost Password?

Register now!
Main Menu
Recent Forum Topics
Who is Online
61 user(s) are online (37 user(s) are browsing Forums)

Members: 0
Guests: 61

Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal

ride height update
Just can't stay away
Just can't stay away

See User information
Comments recommending a search of previous posts lead to a post dated 10 8 21 that was exactly what was needed. I tried using a half inch carriage bolt but ran into a problem with the bolt interfering with the fresh air duct. Started over, removed the battery tray, washer bottle bracket, and air tube. While doing this noticed that the carriage bolt had bent, (eccentric load). Purchased a spring compressor to use as per post. The first time using this setup broke side of the spring compressor hook, same as before, off center load. Second try made sure load was as straight as possible. Worked just fine. Original pin fell out, and there was enough space to accept a four-grove pin. Ride height difference went from about two inches to about one-half inch. I can live with that. Once again thanks to the “experts” input from the forum. Happy

Posted on: 6/3 19:01
 Top  Print 

Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2021, PackardInfo.com All Rights Reserved