|
This Packard Parts Cross-Reference (X-Ref) Database provides a resource for Packard Owners to both search Parts that may Cross Reference to either other Makes/Models of Vehicles or to readily available parts from national part stores. Packard Owners can also add to the Database for benefit of other Packard Owners.
BRAKES PART LISTING
| Part Description | Packard P/N | Packard Model | Model Years | New P/N | Brand | Vendor | Comments | Submitted by |
1.023 CYLINDER ASSEMBLY WHEEL RIGHT REAR | 426536 | 5580, 5680-88 | 1955, 1`956 | WC9026 | RAYBESTOS | MANY | MADE IN CHINA | randy berger |
1.023 cylinder assy-wheel | 426549 | all 55th, 56th | 1955,1956 | WC18291 | RAYBESTOS | MANY | MADE IN CHINA | randy berger |
1.023 cylinder assy-wheel LEFT FRT | 426548 | ALL 55TH, 56TH | 1955, 1956 | WC18290 | RAYBESTOS | MANY | MADE IN CHINA | randy berger |
1.023 CYLINDER ASSY-WHEEL LEFT REAR | 426535 | 5580, 5680-5688 | 1955, 1956 | WC90254 | RAYBESTOS | MANY | MADE IN CHINA | randy berger |
2 prong brake switch | 439841 | Sr | 5580-5680-88 | 76252 | allstar performance | summiit racing | this has 4.5 amps contacts, they are screw terminals, but you can make a jumper to round connectors | Riki |
Adapter for Rear wheel brake cylinders | - | - | 51 to 54, and possibly back to 39 | - | WH7828 | Napa | The wheel cylinder that NAPA sells has a smaller
diameter inlet for the brake fluid than the original unit.
They sell a WH 7828 for about $7.50 that will adapt
the new unit to the existing brake lines on the rear
axle. | David Grubbs |
Bendix power steering slave seals | - | 56 series with Bendix power steering | 56, maybe others too. | - | - | - | Inner seal is H7L-3 MPI. .625 ID, 7/8 OD. | PackardV8 |
Bendix power steering slave seals | - | 56 series with Bendix power steering | 56, maybe others too. | - | - | - | outer dust seal: National 35487 | PackardV8 |
Bendix power steering slave seals | - | 56 series with Bendix power steering | 56, maybe others too. | - | - | - | outer dust seal: National 35487 | PackardV8 |
brake hose front | - | Clipper | 1953 | 36531 | NAPA | NAPA | - | Dans53 |
Brake Hardware / Hold-Down Kit | - | All 48-56 w/12" brakes | 1948-1956 | H4020-2 | Raybestos | Various | Includes hold-down springs, pins, cups, and adjuster hole covers. | DrewLA |
Brake Hold Down Spring | - | Clipper (Max Merritt Shows ALL MODELS) | 1953 (Max Merritt Shows 1948-1954) | H11502 | RAYBESTOS | Rock Auto | - | Chris R |
Brake Hold Down Spring Cup | - | Clipper (Max Merritt Shows ALL MODELS) | 1953 (Max Merritt Shows 1948-1954) | H11332 | RAYBESTOS | Rock Auto | - | Chris R |
Brake Hold Down Spring Pin | - | 1953 (Max Merritt Shows Clipper Only) | 1953 (Max Merritt Shows 1951-1953) | H1105 | RAYBESTOS | Rock Auto | These pins measure 2 1/32" long and have
a #2 stamped on the back of them.
Factory size on 12" brake models. | Chris R |
Brake Hold Down Spring Pin | - | 1955 Clipper | 1955 | 80707 | NAPA | NAPA | These pins have a #4 stamped on the back
of them. | duane.g |
Brake Hold Down Spring Pin | - | 1955 Clipper | 1955 Clipper | H1338-2 | Brake Best | O'Reilly's | These pins have a #4 stamped on the back
of them. | duane.g |
Brake hose | - | all | 1948, 1949, 1950 | BH4497 | Raybestos | Rockauto.com | This hose fits all 3 positions. FL, FR, R | Chuckltd |
Brake Hose | - | Clippers | 1954 -1956 | UP 11146 | Wagner | Napa | All hoses front and back are the same. Replacement for original Wagner F11191 | BigKev |
Brake Hose Front | - | All | 1948-1953 | BH4497 | Raybestos | - | - | BigKev |
Brake Hose Front | - | All | 1948-1953 | BH4497 | Wagner | - | - | BigKev |
Brake Hose Front | - | All | 1948-1953 | UP 4497 | United | Napa | - | BigKev |
Brake Hose Front | - | All | 1948-1953 All | 88215 | Brakeware | Autozone | - | BigKev |
Brake Hose read | - | Clipper | 1953 | 36509 | NAPA | NAPA | - | Dans53 |
BRAKE HOSE, FRONT | 465185 | ALL 55TH; 56TH | 1955, 1956 | 88226 | BRAKEWARE | AUTOZONE | DOES NOT INCLUDE CRUSH WASHER | Brian A. |
BRAKE HOSE, REAR | 418240 | ALL 55TH; 56TH | 1955, 1956 | 88284 | BRAKEWARE | AUTOZONE | DOES NOT INCLUDE CRUSH WASHER; LONGER THAN FRONT HOSES | Brian A. |
Brake hoses | - | 8 and Super 8 | 1941 -1950 | 4497 | NAPA | NAPA | - | DaveFields |
Brake Light Switch | ? | 2462 | 1951 Should Fit Others | SL134 | NAPA/ECHLIN | NAPA | This Switch is for a 1950 Ford Truck.
It use's 2 - .157 Barrel terminals like
stock. | ASSHOLES GARAGE |
Brake Light Switch | 362862 | 5540 W/O Torsion-Level | 1955 | BF 4805 | Wells | NAPA/CarQuest/Advance | Two prong hydraulic brake light switch | - |
Brake Light Switch | 439841 | All With Torsion-Level Suspension | 1955/1956 | RB 402 | Wells | NAPA/CarQuest/Advance | This is the three-prong hydraulic brake light switch for early 1970s VWs. Has same dimensions and internal operation as original part but different exterior wire connectors. Will work. | - |
Brake Light Switch | - | All | 51-54 (Maybe Others) | F4805 | - | Autozone | This is for cars that use a two terminal switch | BigKev |
Brake Wheel Cylinder (Front Left) | 18292 | Clipper (Max Merritt Shows ALL MODELS) | 1953 (Max Merritt Shows 1951-1954) | WC18290 | RAYBESTOS | Rock Auto | This Wheel cylinder has a 1 1/8" bore
with a 3/8"- 24 thread size. Alternate
Part = Napa UP 18290 | Chris R |
Brake Wheel Cylinder (Front Right) | 18293 | Clipper (Max Merritt Shows ALL MODELS) | 1953 (Max Merritt Shows 1951-1954) | WC18291 | RAYBESTOS | Rock Auto | This Wheel cylinder has a 1 1/8" bore
with a 3/8"- 24 thread size. Alternate
Part = Napa UP 18291 | Chris R |
BRAKE WHEEL CYLINDER, LEFT FRONT | 426548 | ALL 55TH; 56TH | 1955, 1956 | 33220 | - | AUTOZONE | 1 1/8" DIAMETER | Brian A. |
BRAKE WHEEL CYLINDER, LEFT REAR | 426535 | 5580; 5680-88 | 1955, 1956 | 33005 | - | AUTOZONE | 1" DIAMETER | Brian A. |
BRAKE WHEEL CYLINDER, RIGHT FRONT | 426549 | ALL 55TH; 56TH | 1955, 1956 | 33221 | - | AUTOZONE | 1 1/8" DIAMETER | Brian A. |
BRAKE WHEEL CYLINDER, RIGHT REAR | 426536 | 5580; 5680-88 | 1955, 1956 | 33004 | - | AUTOZONE | 1" DIAMETER | Brian A. |
Emergency Brake Spring | - | 1955 Clipper | 1955 | - | - | - | - | duane.g |
Emergency Brake Spring | - | 1955 Clipper | 1955 | H1338-2 | Brake Best | O'Reilly's | These pins have a #4 stamped on the back
of them. | duane.g |
Front Axle Grease/Dust Cap | - | ALL | ALL (see comment) | 730-2409 | NAPA | NAPA | Grease cap for most cars except the heavy iron
prewars and 11" brake postwars | BigKev |
Front brake flex hose | 418240 | Patrician and ?? | 51-54 | BH11146 | Raybestos | - | Hex size on hose where it threads into cylinder is larger than original but causes no problem. Hose is approxamatly 3/8 in. longer than original. | MikeG |
FRONT BRAKE HOSE | 418240 | 53 PATRICIAN AND ?? | 53 AND ??? | BH11146 | RAYBESTOS | - | THIS HOSE IS ABOUT 3/8 IN. LONGER THAN ORIGINAL AND THE HEX SIZE WHERE IT SCREWS INTO WHEEL CYL. IS LARGER, BUT IT FITS JUST FINE. | MikeG |
Front Brake Shoes | - | Clippers | 1954 (maybe others) | 160 | Wagner | Napa | 11x2.5 | BigKev |
front hydrolic brake hoses | - | 1953 Clipper Deluxe | 1953 | front 11147 (3/8-24) | Napa | - | rear is Napa 11146, slightly longer | Brenda |
Front Left Wheel Cylinder | - | Clippers | 1954 | 33220 | Brakeware | Autozone | - | BigKev |
Front Left Wheel Cylinder | - | Clippers | 1954 (maybe others) | F18290 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | BigKev |
Front Right Wheel Cylinder | - | Clippers | 1954 | 33221 | Brakeware | Autozone | - | BigKev |
Front Right Wheel Cylinder | - | Clippers | 1954 (maybe others) | F18291 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | BigKev |
Front Shoes | - | Clippers | 1954 | 264PG | Raybestos | - | Professional Grade Shoes | BigKev |
Front wheel cylinders-- | - | Most juniors | 1936-1950 | wc13368/wc13369 | Raybestos | Napa, Autozone, local auto parts store | These are 1 1/16 direct replacement. I have used on
1940-120, 1946 Clipper Deluxe and 1950 Deluxe Eight | dallas |
Front wheel cylinders-- | - | Most juniors | 1936-1950 | wc13368/wc13369 | Raybestos | Napa, Autozone, local auto parts store | These are 1 1/16 direct replacement. I have used on
1940-120, 1946 Clipper Deluxe and 1950 Deluxe Eight | dallas |
Hydraulic Brake Switch | - | - | 51-54 | SL-134 | NAPA | NAPA | From mid 60's Mustang | OldGold |
Left Rear Wheel Cylinder | - | Clippers | 1955-1956 | 33791 | Bendix | - | - | BigKev |
Left Rear Wheel Cylinder | - | Clippers | 1955-1956 | WC37218 | Raybestos | - | - | BigKev |
Master Cylinder | - | All with Manual Brakes | 1951-1956 | MC3081 | Raybestos | - | Replacement for original Wagner F3081
| BigKev |
Master Cylinder (Non Power) | - | All | 51-56 | F3081 | Wagner | Napa | Vehicles with Manual Brakes | BigKev |
Master Cylinder Kit | - | ALL except Amb/Hearse | 1941-1950 | UP 2 | UP Line | NAPA | - | JD in KC |
Push Rod- Wheel Cylinder | - | Patrician | 55 / 56 | DIC-0978300 | DICO | wholesalemarine.com | Exact match of OEM Push Rod | TroyT |
Rear Brake Shoes | - | Clippers | 1954 | 228PG | Raybestos | - | Professional Grade Shoes | BigKev |
Rear Brake Shoes | - | Clippers | 1954 (maybe others) | 161 | Wagner | Napa | 11x2 | BigKev |
Rear Brake Shoes | - | 55 Clipper | 55 | TS-10A | NAPA Proformer | NAPA | - | duane.g |
rear hydrolic brake hose (3/8-24) | - | 1953 Clipper Deluxe | - | rear 11146 | Napa | - | This is slightly longer than front (#11147) incase the axel drops while lifting.(3/8-24) | Brenda |
Rear Left Wheel Cylinder | - | Clippers | 1954 (maybe others) | F18984 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | BigKev |
Rear Right Wheel Cylinder | - | Clippers | 1954 (maybe others) | F18985 | Wagner | Napa | Any parts store will be able to cross this to the brand they carry. | BigKev |
rear wheel cylinder | - | - | 1946 | WC-4802, WC-4803 | Wagner | - | I believe these numbers will work for the 15/16" bore wheel cylinders. | ptv |
Rear Wheel Cylinder 15/16" - L, R | 302950, 302951 | 22 Series | 48-54 | 9025 / 9026 | UP Line | Napa | Needs adapter for brake line and is slightly larger bore at 1" rather than 15/16" | - |
Rear Wheel Cylinder 15/16" - L, R | 302950, 302951 | 22 Series | 48-54 | 9025 / 9026 | UP Line | Napa | Needs adapter for brake line and is slightly larger bore at 1" rather than 15/16" | - |
Rear Wheel Cylinders | 302950, 302951 | 22 Series | - | 9025 / 9026 | UP Line | Napa | Update to my existing entry:
Adapter is Edelmann 258430
takes the 1/4" hard line to 3/16" on the cylinder | - |
Return Spring (Primary) | 303837 | All 22nd-56th Series w/12" brakes | 1948-1956 | H122 | Raybestos | Various | Identical to OEM Packard spring, orange just like Packard used. | DrewLA |
Return Spring (Secondary) | 303836 | All 22nd - 56th w/ 12 | - | - | - | - | - | DrewLA |
Return Spring (Secondary) | 303836 | All 22nd - 56th Series w/12" brakes | 1948-1956 | H130 | Raybestos | Various | Same length and strength as Original Packard springs but these are grey instead of yellow. | DrewLA |
Right Wheel Cylinder | - | Clippers | 1955-1956 | WC37219 | Raybestos | - | - | BigKev |
Right Wheel Cylinder | - | Clippers | 1955-1956 | 33792 | Bendix | - | - | BigKev |
Rubber brake Hoses | 1605 | Clipper | 1950, 1951, 1952, 1953 | 4497 | up | NAPA | NAPA has these in stock all 3 hoses are the same | Dans53 |
stoplight switch | - | all | 42 and 48 for sure | SLS27 | Standard | O'Reilly | 1/4 pipe with two prongs | JonDFuiks |
wheel cylinder | - | Deluxe | 1949-1951 | W18290&1 | Dorman | Rock Auto | Only difference from orig, the center casting has one not two inlet tap areas.
But for $5.50 ea, they won't know. for Look up: fits a '51 deluxe.
| Fish'n Jim |
Wheel Cylinders - Front | - | 5680 | 1956 | Left 18292 Right 182 | Wagner | - | - | JP |
Wheel Cylinders - Front | - | 5680 | 1956 | L. 18292 R. 18293 | Wagner | - | - | JP |
Wheel Cylinders - Rear | - | 5680 | 1956 | Left & Right 9023 | Wagner | - | - | JP |
