|
Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
|
1932-1937 Twelve - ELECTRICAL
ELECTRICAL - BATTERY BOX | |||
| Part Number | Part Description | Application / Note | QTY |
Battery box assembly | - | X | |
Battery box battery clamp assembly | - | X | |
Screw 1/4-28 x 1" hex. hd | - | X | |
Nut 1/4-28 | - | X | |
Lockwasher 1/4 | - | X | |
Battery box battery clamp anchor bolt | - | X | |
Battery box battery clamp anchor bolt spacer | - | X | |
Nut 1/4-28 | - | X | |
Lockwasher 1/4" | - | X | |
Plain washer 17/64 x 3/4" | - | X | |
Battery box cover assembly | - | X | |
Battery box cover cushion | - | X | |
Battery box cover cushion retainer and finishing plate screw nut No. 10-32 | - | X | |
Lockwasher No. 10 | - | X | |
Battery box cover finishing plate | - | X | |
Battery box cover lock bolt | - | X | |
Battery box cover lock bolt bracket | - | X | |
Battery box cover-lock bolt bracket screw | - | X | |
Nut 1/4-28 | - | X | |
Lockwasher 1/4 | - | X | |
Battery box cover lock bolt spacer | - | X | |
Screw | - | X | |
Nut No. 10-38 | - | X | |
Lockwasher No. 10 | - | X | |
Battery box cover lock bolt spring | - | X | |
Battery box cover lock cylinder assembly ly | - | X | |
Battery box cover lock cylinder plate | - | X | |
Battery box cover lock cylinder plate to cylinder screw No. 4-40 x 3/16" F.H | - | X | |
Battery box to fender bolt 1/4-88 x 3/4" hex. hd | - | X | |
Battery box to fender bolt 1/4-28 x 5/8" carriage | - | X | |
Lockwasher 1/4" | - | X | |
Nut 1/4-28 | - | X | |
Washer 17/64 x 3/4" plain | - | X | |
Battery box to fender screw 1/4-28 x 3/4" O.H. | (Use with side wheel carrier) | X | |
Battery box to fender screw | (Use with side wheel carrier) | X | |
Nut | (Use with side wheel carrier) | X | |
Battery box to frame bolt 5/16-24 x 1-7/8" hex, hd | - | X | |
Washer 5/16" | - | X | |
Lockwasher 5/16" | - | X | |
Nut 5/16-24 | - | X | |
Battery box liner | - | X | |
ELECTRICAL - ELECTRICAL | |||
| Part Number | Part Description | Application / Note | QTY |
Electrical (905-906) battery | - | X | |
Electrical horn-left | - | X | |
Electrical horn-right | - | X | |
Electrical steering gear lighting switch terminal block assembly (Supersedes 178009) | - | X | |
Electrical stop light SWITCH | - | X | |
Electrical wiring fuse block assembly | - | X | |
Gasoline tank gauge assembly | - | X | |
Instrument board ammeter | - | X | |
Instrument board cigar lighter | - | X | |
Instrument board gasoline or oil gauge | - | X | |
Instrument board gasoline or oil gauge SWITCH | - | X | |
Instrument board ignition coll and switch assembly | - | X | |
Instrument board light socket and cable assembly indirect | - | X | |
Instrument board light direct (Reading light) | - | X | |
Instrument board light SWITCH | - | X | |
Instrument board starter motor SWITCH | - | X | |
Lamp front assembly | - | X | |
Lamp fender assembly | - | X | |
Lamp rear left | - | X | |
Lamp rear right | - | X | |
Lamp running board | - | X | |
Motor crankcase oil gauge and float assembly | - | X | |
Motor distributor | - | X | |
MOTOR generator (Supersedes 209074) | - | X | |
Motor ignition spark plug | - | X | |
Motor starter motor and switch assembly | - | X | |
Steering post horn button and contact assembly | - | X | |
ELECTRICAL - CABLES | |||
| Part Number | Part Description | Application / Note | QTY |
Electrical-battery to ground cable assembly . 191167 | - | X | |
Electrical-battery frame junction to motor 127279 tarter switch cable | - | X | |
Electrical-coil switch to gasoline and oil gauge cable | - | X | |
Electrical-cigar lighter to fuse block 33287 | - | X | |
Electrical-wiring left assembly (905) | - | X | |
Electrical-wiring reading light to switch 166404 16" | - | X | |
Motor ignition coil to distributor high 156625 207477 42-1/2" 156626 | - | X | |
Motor ignition coil to distributor high 156625 207477 37n 156626 | - | X | |
Motor ignition coil to distributor high 156625 tension cable-left | - | X | |
Motor ignition coil to distributor low tension cable left | - | X | |
Motor ignition coil to distributor low tension cable-right | - | X | |
Motor ignition high tension cable to 156625 park plug No. 1 left | - | X | |
Motor ignition high tension cable to 156625 park plug No. 2 left | - | X | |
Motor ignition high tension cable to 156625 park plug No. 3 left | - | X | |
Motor ignition high tension cable to 156625 park plug No. 4 left | - | X | |
Motor ignition high tension cable to 156625 park plug No. 5 left | - | X | |
Motor ignition high tension cable to 156625 park plug No. 6 left | - | X | |
Motor ignition high tension cable to 156625 park plug No. 1 right | - | X | |
Motor ignition high tension cable to 156625 park plug No. 2 right | - | X | |
Motor ignition high tension cable to 156685 park plug No. 3 right | - | X | |
Motor ignition high tension cable to 156625 park plug No. 4 right | - | X | |
Motor ignition high tension cable to 156625 park plug No. 5 right | - | X | |
Motor ignition high tension cable to 156625 park plug No. 6 right | - | X | |
Steering post horn button to horn cable assembly | - | X | |
Instrument board gasoline or oil gauge SWITCH | - | X | |
Instrument board ignition coil and switch assembly | - | X | |
Instrument board light-direct (Reading light) | - | X | |
Instrument board light socket and cable assembly- indirect | - | X | |
Instrument board light SWITCH | - | X | |
Instrument board starter motor SWITCH | - | X | |
Lamp front-assembly-left | - | X | |
Lamp front-assembly-right | - | X | |
Lamp fender-assembly | - | X | |
Lamp rear-right and bracket assembly | - | X | |
Lamp rear-left and bracket assembly | - | X | |
Lamp running board | - | X | |
Motor crankcase oil gauge and float assembly (After Frame No. 901200) | - | X | |
Motor crankcase oil gauge and float assembly (Prior to Frame No. 901201) | - | X | |
Motor distributor | - | X | |
Motor generator (Supersedes 209074) | - | X | |
Motor ignition spark plug | - | X | |
Motor starter motor and switch assembly | - | X | |
Steering post horn button and contact assembly | - | X | |
Electrical-battery to ground cable assembly | - | X | |
electrical-battery to starter switch cable assembly | - | X | |
Electrical-wiring assembly-front left (Chassis) | - | X | |
Electrical-wiring assembly (Body) | - | X | |
Electrical-wiring assembly-rear left (Chassis) (1005) | - | X | |
Electrical-wiring assembly-rear left (Chassis) (1006) | - | X | |
Electrical-wiring assembly-right (Chassis) | - | X | |
Instrument board gasoline and oil gauge to coil switch cable 13-1/2" | - | X | |
Instrument board gasoline and oil gauge to switch cable 7" | - | X | |
Instrument board reading light to SWITCH cable | - | X | |
Motor ignition coll to distributor high tension cable | - | X | |
Motor ignition coil to distributor low tension cable-right | - | X | |
Motor ignition coil to distributor low tension cable-left | - | X | |
Motor ignition high tension cable to 156625 spark plug No. 1 right | - | X | |
Motor ignition high tension cable to 15662 spark plug No. 2 right | - | X | |
Motor ignition high tension cable to 156625 spark plug No. 3 right | - | X | |
Motor ignition high tension cable to 156625 spark plug No. 4 right | - | X | |
Motor ignition high tension cable to 156625 spark plug No. 5 right | - | X | |
Motor ignition high tension cable to 156625 spark plug No. 6 right | - | X | |
Motor ignition high tension cable to 156625 spark plug No. 1 left | - | X | |
ELECTRICAL - ELECTRICAL | |||
| Part Number | Part Description | Application / Note | QTY |
Motor ignition high tension cable to 207477 13-5/8" 156626 | - | X | |
Motor ignition high tension cable to high tension cable to spark 156625 207477 22" 156626 | - | X | |
Motor ignition high tension cable to high tension cable to spark 156625 207477 24-3/8" 156626 | - | X | |
Motor ignition high tension cable to high tension cable to spark 156625 207477 32" 156626 | - | X | |
Motor ignition high tension cable to high tension cable to spark 156625 207477 33-3/4" 156626 | - | X | |
Steering post horn button to horn cable | - | X | |
Electrical-battery assembly | - | X | |
Electrical-horn left | - | X | |
Electrical-horn left (Specify color) | - | X | |
Electrical-horn right | - | X | |
Electrical-horn right (Specify color) | - | X | |
Electrical-horn relay | - | X | |
Electrical-steering gear lighting switch terminal block assembly | - | X | |
Electrical-stop light SWITCH | - | X | |
Electrical wiring fuse block assembly | - | X | |
Gasoline tank gauge assembly | - | X | |
Instrument board ammeter | - | X | |
Instrument board cigar lighter assembly | - | X | |
Instrument board gasoline or oil gauge | - | X | |
Instrument board gasoline or oil gauge SWITCH | - | X | |
Instrument board ignition coil switch and bracket assembly | - | X | |
Instrument board ignition coil cable and switch assembly | - | X | |
Instrument board light-direct (Reading light) | - | X | |
Instrument board light socket and cable assembly rH indirect | - | X | |
Instrument board light SWITCH | - | X | |
Instrument board starter motor SWITCH | - | X | |
Lamp front assembly left | - | X | |
Lamp front assembly right | - | X | |
Lamp fender assembly | - | X | |
Lamp rear right and bracket assembly | - | X | |
Lamp rear left and bracket assembly | - | X | |
Lamp running board | - | X | |
Motor crankcase oil gauge and float assembly | - | X | |
Motor distributor | - | X | |
Motor generator (Supersedes 215265) | - | X | |
Motor ignition spark plug | - | X | |
Motor starter motor and switch assembly | - | X | |
Steering post horn button and contact assembly | - | X | |
Transmission back light SWITCH | - | X | |
Electrical battery ground cable assembly | - | X | |
Electrical battery to starter switch cable assembly. | - | X | |
Electrical wiring assembly (1107) | - | X | |
Electrical wiring assembly (1108) | - | X | |
Electrical wiring right assembly | - | X | |
Instrument board gasoline or oil gauge to SWITCH cable assembly | - | X | |
Motor Ignition coll to distributor high tension cable assembly | - | X | |
Motor ignition coll to distributor low tension cable assembly | - | X | |
Motor ignition high tension cable to spark plug So. 1 left assembly | - | X | |
Motor Ignition high tension cable to spark plug No. 2 left assembly | - | X | |
Motor ignition high tension cable to spark plug No. 3 left assembly | - | X | |
Motor ignition high tension cable to spark plug No. 4 left assembly | - | X | |
Motor ignition high tension cable to spark plug No. 5 left assembly | - | X | |
Motor ignition high tension cable to spark plug No. 6 left assembly | - | X | |
Motor ignition high tension cable to spark plug No. 1 right assembly | - | X | |
Motor ignition high tension cable to spark plug No. right assembly | - | X | |
Motor ignition high tension cable to spark plug No. right assembly | - | X | |
Motor ignition high tension cable to spark plug No. right assembly | - | X | |
Motor ignition high tension cable to spark plug No. right assembly | - | X | |
Motor ignition high tension cable to spark plug No. right assembly | - | X | |
Steering post horn button cable assembly ELECTRICAL (See Wiring Diagram) | - | X | |
Electrical battery assembly | - | X | |
Electrical battery assembly | - | X | |
Electrical horn-left | - | X | |
Electrical horn-right | - | X | |
Electrical horn relay (Supersedes 216134) | - | X | |
Electrical stop light SWITCH | - | X | |
Electrical wiring fuse block assembly | - | X | |
Electrical wiring-steering gear lighting SWITCH terminal block assembly | - | X | |
Gasoline tank gauge assembly | (Used with L194-L195- 832-33-34-35-30-31-21-932-33-34-35-21-31-30-L294- -I L295) | X | |
Gasoline tank gauge assembly | (Used with 836-37-38- 39-27-73-936-37-38-39-27-73) | X | |
Instrument board ammeter | - | X | |
Instrument board cigar lighter assembly | - | X | |
Instrument board clock | - | X | |
Instrument board gasoline gauge | - | X | |
Instrument board gasoline gauge | - | X | |
Instrument board gasoline gauge or oil gauge SWITCH | - | X | |
Instrument board light cable and socket assembly | - | X | |
Instrument board panel light switch assembly | - | X | |
Instrument board reading light socket assembly | - | X | |
Instrument board reading light SWITCH | - | X | |
Instrument board light bulb signal | - | X | |
Instrument board starter motor SWITCH | - | X | |
Lamp courtesy assembly | - | X | |
Lamp front assembly-right | - | X | |
Lamp front assembly-left | - | X | |
Lamp fender assembly | - | X | |
Lamp rear right assembly | - | X | |
Lamp rear left assembly | - | X | |
Motor crankcase oil gauge and float assembly | - | X | |
Motor distributor | - | X | |
Motor distributor | - | X | |
Motor generator | - | X | |
Motor generator | - | X | |
Motor Ignition coll | - | X | |
Motor Ignition spark plug | - | X | |
Motor ignition switch and cable assembly | - | X | |
Motor starter motor and switch assembly | - | X | |
Steering post horn button and contact assembly | - | X | |
Transmission backing light SWITCH | - | X | |
Electrical battery to ground cable assembly | - | X | |
Electrical battery to starter switch cable assembly | (Use with bodies 821-31-36-38-39-921-31-36-38-39). | X | |
Electrical battery to starter switch cable assembly | (Use with bodies 827-32-33-37-73-927-32-33-37-73- L195-L294) | X | |
Electrical battery to starter switch cable assembly | (Use on bodies 830-34-35-L194-930-34-35-L295) | X | |
Electrical gasoline and oil gauge to switch cable assembly | - | X | |
Electrical motor to frame ground cable assembly | - | X | |
Electrical wiring left assembly | (Used on 1207) | X | |
Electrical wiring left assembly | (Used on 1407) | X | |
Electrical wiring left assembly | (Used on 1208) | X | |
Electrical wiring left assembly | (Used on 1408) | X | |
Electrical wiring right assembly | - | X | |
Electrical wiring right assembly | - | X | |
Electrical wiring horn cable assembly-left | - | X | |
Electrical wiring horn cable assembly-right | - | X | |
Instrument board reading light socket and cable assembly | - | X | |
Lamp fender extension cable assembly | - | X | |
Motor ignition coil to distributor high tension cable assembly | - | X | |
Motor ignition spark plug cable assembly-left No 1 | - | X | |
Motor Ignition spark plug cable assembly-left No 2 | - | X | |
Motor ignition spark plug cable assembly-left No 3 | - | X | |
Motor ignition spark plug cable assembly-left No 4 | - | X | |
Motor ignition spark plug cable assembly-left No 5 | - | X | |
Motor ignition spark plug cable assembly-left No 6 | - | X | |
Motor ignition spark plug cable assembly-right No1 | - | X | |
Motor ignition spark plug cable assembly-right No. 3 | - | X | |
Motor ignition spark plug cable assembly-right No. 3 | - | X | |
Motor ignition spark plug cable assembly-right No. 4 | - | X | |
Motor ignition spark plug cable assembly-right No. 5 | - | X | |
Motor ignition spark plug cable assembly-right No. 6 HH | - | X | |
ELECTRICAL - ELECTRICAL MISCELLANEOUS | |||
| Part Number | Part Description | Application / Note | QTY |
Electrical battery assembly | - | X | |
Electrical battery assembly | - | X | |
Electrical battery assembly (Prest-O-Lite type AH 6176- G-special No. 1805) | - | X | |
Electrical battery to frame junction cable | - | X | |
Terminal (Negative) | - | X | |
Terminal 1/2 I.D. x 13/32" eye | - | X | |
Nut 3/8-24 | - | X | |
Lockwasher 3/8" | - | X | |
Electrical battery to frame Junction cable Insulator | - | X | |
Electrical battery to ground cable assembly | - | X | |
Electrical battery to ground cable assembly | - | X | |
Electrical battery to ground cable assembly ly | - | X | |
Electrical battery to ground cable assembly | - | X | |
Washer 3/8" plain | - | X | |
Screw 3/8-24 x 1-3/16" hex. hd | - | X | |
Lockwasher 3/8" | - | X | |
Nut 3/8-24 plain std | - | X | |
Nut 3/8-24 plain | - | X | |
Electrical battery frame junction cable terminal stud (Negative) | - | X | |
Nut 3/8-24 plain | - | X | |
Lockwasher 3/8" | - | X | |
Insulator-inner | - | X | |
Insulator-outer | - | X | |
Insulator-retaining washer | - | X | |
Insulator-tube | - | X | |
Electrical battery frame junction cable terminal stud (Positive) | - | X | |
Lockwasher 3/8" | - | X | |
Nut 3/8-24 plain | - | X | |
Washer 3/8" special | - | X | |
Electrical battery frame Junction to motor starter switch cable assembly | - | X | |
Insulator | - | X | |
Terminal 1/2 I.D. x 12/38" eye | - | X | |
Terminal 1/2 I.D. x 13/32" eye | - | X | |
Cable clip style No. 18 x 5/8" | - | X | |
Electrical battery retaining clamp | - | X | |
Electrical battery retaining clamp | - | X | |
Electrical battery retaining clamp screw (2-3/16" long). | - | X | |
Electrical battery retaining clamp screw (2-11/16" long) | - | X | |
Electrical battery retaining clamp nut | - | X | |
Lockwasher 3/8" | - | X | |
Electrical battery to starter switch cable assembly | - | X | |
Electrical battery to starter switch cable assembly | (Used with bodies 836-838-9-831-939-36-38-921-31) | X | |
Electrical battery to starter switch cable assembly | (Used with bodies 832-33-37-21-27-873-L195-932-33-37- 27-73-L294) | X | |
Electrical battery to starter switch cable assembly | (Used on model 1208) (Used with bodies 830-34-35-L194- 930-34-35-L295) | X | |
Clip Style No. 1 x 5/8" | - | X | |
Clip | - | X | |
Clip | - | X | |
Screw 1/4-28 x 5/8" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Nut 1/4-28 | - | X | |
Electrical battery to starter switch cable clip screw No. 10-32 x 5/8" fill, hd | - | X | |
Nut No. 10-32 | - | X | |
Lockwasher 5/16" | - | X | |
Washer 3/16 x 5/8" | - | X | |
Electrical battery terminal grease retainer | - | X | |
Electrical battery to starter switch cable insulator | - | X | |
Electrical battery to starter switch cable insulator | - | X | |
Electrical battery to starter switch cable Insulator | - | X | |
Electrical battery to starter switch cable insulator | (Used on model 1208) | X | |
Terminal (Battery end negative) | - | X | |
Terminal (Switch end) | - | X | |
Electrical battery support front assembly | (Used with bodies 836-38-39-821-31-921-31-38-36-39) | X | |
Electrical battery support front assembly | (Used with bodies 832-33-37-27-L195-932-3-7-87-L294) | X | |
Electrical battery support front assembly | (Used with bodies 830-34-35-L194-,930~34-35-L295) | X | |
Electrical battery support front assembly | (Use with body 873-973) | X | |
Electrical battery support rear assembly | (Used with bodies 836-838-839-873-21-31-936-38-39-73-21-31) | X | |
Electrical battery support rear assembly | (Used with bodies 832-3-4-37-27-30-35-L194-L195-927-30-32-33-34- 35-37-L294-L295) | X | |
Electrical battery support bottom | - | X | |
Electrical battery support bottom spacer | - | X | |
Electrical battery support bottom screw 3/8-24 x 1-1/4" hex. hd | - | X | |
Lockwasher 3/8" | - | X | |
Electrical battery support clamping bolt | - | X | |
Bolt 3/8-24 x 1-1/16" hex. hd | - | X | |
Nut 1/4-28 | - | X | |
Electrical battery support front to frame X-member screw 3/8-24 x 3/4" hex. hd | - | X | |
Lockwasher 3/8" | - | X | |
Nut 3/8-24 | - | X | |
Electrical battery support rear to frame screw 3/8-24 3/4" hex. hd | - | X | |
Lockwasher 3/8" | - | X | |
Nut 3/8-24 | - | X | |
Electrical battery support screw nut 3/8-24 | - | X | |
Electrical battery support rear to side plate screw 5/16-24 x 5/8" hex. hd | - | X | |
Lockwasher 5/16" | - | X | |
Nut 5/16-24 | - | X | |
Electrical cable connector | - | X | |
Electrical cable connector tip (Female) tip (Male) | - | X | |
Electrical cable terminal side 25/64" eye | - | X | |
Electrical cable terminal 13/64" H eye | - | X | |
Electrical cable terminal 21/64" eye | - | X | |
Electrical cable terminal 21/64" eye (Double cable) | - | X | |
Electrical cable terminal 7/32" eye | - | X | |
Electrical cable terminal 7/32" eye | - | X | |
Electrical cable terminal 11/64" eye | - | X | |
Electrical cable terminal 7/32" eye | - | X | |
Electrical cable terminal 11/64" eye open end | - | X | |
Electrical cable terminal 11/64" open end | - | X | |
Electrical cable terminal 1/4" eye | - | X | |
Electrical cable terminal special | - | X | |
Electrical cable terminal insulator | - | X | |
Electrical cable terminal 11/64" eye open end | - | X | |
Electrical cable terminal 11/64" eye | - | X | |
Electrical cable terminal insulator | - | X | |
Electrical cable terminal Insulator | - | X | |
Electrical cable terminal Insulator | - | X | |
Electrical cable terminal Insulator | - | X | |
Electrical horn-left | - | X | |
Electrical horn-right | - | X | |
Electrical horn-left (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-left (Specify color) (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-right (Return defective 'unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-right (Specify color) (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-left (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-left (Specify color) (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-right (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-right (Specify color) (Return defective unit to the factory for repairs or adjustment) | - | X | |
Electrical horn-left (Spartan | - | X | |
Electrical horn-right (Spartan | - | X | |
Electrical horn to bracket stud | - | X | |
Nut 1/4-28 plain | - | X | |
Nut 1/4-28 blind | - | X | |
Lockwasher 1/4" | - | X | |
Electrical horn bumper assembly | - | X | |
Rivet 9/64 x 3/16" flat hd | - | X | |
Electrical horn cable insulation | - | X | |
Electrical horn grommet | - | X | |
Electrical horn to horn button cable connector (Single) | - | X | |
Electrical horn to radiator shell brace screw 1/4-28 &- 1" hex, hd | - | X | |
Lockwasher 1/4" | - | X | |
Nut 1/4-28 plain | - | X | |
Electrical horn relay (Supersedes 216134) | - | X | |
Screw No. 10-32 x 7/8" fill, hd | - | X | |
Screw No. 10-32 x 5/16" hex. hd | - | X | |
Washer | - | X | |
Washer | - | X | |
Lockwasher 3/16" | - | X | |
Lockwasher 1/4" | - | X | |
Nut 1/4-28 | - | X | |
Nut No. 10-32 | - | X | |
Electrical horn relay screw spacer | - | X | |
Electrical horn relay terminal screw-long (No. 10-32 1/2" rnd. hd.) | - | X | |
Electrical horn relay terminal screw-short (No. 10-32 3/8" rnd. hd.) | - | X | |
Wa washer No. 10 | - | X | |
Lockwasher 3/16" | - | X | |
Nut No. 10-32 special | - | X | |
Nut No. 10-32 | - | X | |
Electrical horn support bracket nut No.10-24 | - | X | |
Electrical horn support bracket lockwasher | - | X | |
Electrical horn terminal screw No. 8-32 x 1/4" rnd. hd | - | X | |
Lockwasher | - | X | |
Electrical instrument board signal light contact ash | - | X | |
Electrical instrument board signal light socket | - | X | |
Electrical Instrument board signal light spring | - | X | |
Electrical instrument board signal light spring washer | - | X | |
Electrical lamp front cable connecting plug assembly | - | X | |
Electrical lamp front cable connecting plug ground wire terminal insulator | - | X | |
Electrical lamp front cable connecting plug to headlight sleeve | - | X | |
Electrical lamp front ground wire to frame screw 1/4-28 x 3/4" hex. hd. std | - | X | |
Nut 1/4-28 plain | - | X | |
Washer 5/16" | - | X | |
Lockwasher 1/4" | - | X | |
Electrical lamp front groin. , wire to frame screw | - | X | |
Lockwasher 1/4" | - | X | |
Nut | - | X | |
Washer | - | X | |
Electrical lamp rear cable conduit assembly | - | X | |
Electrical lamp rear connecting plug rear | - | X | |
Electrical lamp rear connecting plug sleeve | - | X | |
Electrical motor to frame ground cable assembly | - | X | |
Washer 3/8" plain (ZP No. 1407) | - | X | |
Electrical motor starter switch and ammeter cable insulator | - | X | |
Electrical steering gear lighting switch assembly (Supersedes 178009) | - | X | |
Electrical steering gear lighting switch terminal block assembly | - | X | |
Electrical steering gear lighting switch adjusting screw | - | X | |
Lockwasher | - | X | |
Electrical steering gear lighting switch cover | - | X | |
Electrical steering gear lighting switch cover | - | X | |
Electrical steering gear lighting switch cover | - | X | |
Electrical steering gear lighting switch cover screw | - | X | |
Lockwasher No. 10 | - | X | |
Electrical steering gear lighting switch cover cable bushing | - | X | |
Electrical stop light fuse (20 amp.) | - | X | |
Electrical stop light fuse container and cable assembly | - | X | |
Electrical stop light fuse container cap | - | X | |
Electrical stop light SWITCH | - | X | |
Electrical stop light SWITCH | - | X | |
Screw 1/4-28 x 5/8" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Screw No. 10-32 x 5/8n hex. hd | - | X | |
Nut 1/4-28 | - | X | |
Lockwasher No. 10 | - | X | |
Washer | - | X | |
Electrical stop light switch cable bushing | - | X | |
Electrical wiring assembly | (Used on 1107) | X | |
Electrical wiring assembly | (Used on 1108) | X | |
Electrical wiring left assembly | (Used on 1207) | X | |
Electrical wiring left assembly | (Used on 1208) | X | |
Electrical wiring right assembly (Supersedes 825309) | - | X | |
Electrical wiring left assembly | (Used on 905 only) | X | |
Electrical wiring left assembly | (Used on 906 only) | X | |
Electrical wiring right assembly | - | X | |
Electrical wiring assembly (Body) | - | X | |
Electrical wiring front left assembly (Chassis) | - | X | |
Electrical wiring right assembly (Chassis) | - | X | |
Electrical wiring right assembly | - | X | |
Electrical wiring rear left assembly (Chassis) | (Used on 1006 only) | X | |
Electrical wiring rear left assembly (Chassis) | (Used on 1005 only) | X | |
Electrical wiring battery insulator | - | X | |
Electrical wiring battery to starter switch cable H t-\ retaining ring | - | X | |
Electrical wiring backing light switch cable clip | - | X | |
Screw No. 10-32 x 1/2 fill. hd | - | X | |
Lockwasher 3/16" | - | X | |
Nut No. 10-32 | - | X | |
Electrical wiring to brake pedal shaft bracket clip | - | X | |
Electrical wiring clip (Single) | - | X | |
Electrical wiring clip | - | X | |
Electrical wiring clip screw | - | X | |
Nut No. 10-38 | - | X | |
Lockwasher | - | X | |
Electrical wiring fender light cable fender insulator (Loom) | - | X | |
Electrical wiring fender light cable fender Insulator Cti (Loom) | - | X | |
Electrical wiring fender light cable clip | - | X | |
Screw | - | X | |
Lockwasher | - | X | |
Nut 1/4-28 | - | X | |
Electrical wiring fuse | - | X | |
Electrical wiring fuse block assembly | - | X | |
Electrical wiring fuse block assembly | - | X | |
Electrical wiring fuse block assembly | - | X | |
Screw 1/4-28 x 3/4" hex. hd. mach | - | X | |
Screw No. 10-32 x 2" fill. hd. mach | - | X | |
Screw No. 10-32 x 5/16" hex. hd | - | X | |
Washer 3/16" | - | X | |
Lockwasher 1/4" | - | X | |
Lockwasher 3/16" std | - | X | |
Nut No. 10-32 SAE Std | - | X | |
Electrical wiring fuse block base | - | X | |
Electrical wiring fuse block cable clip right | - | X | |
Electrical wiring fuse block insulator | - | X | |
Electrical wiring fuse block strap connector | - | X | |
Insulator | - | X | |
Electrical wiring fuse block terminal screw No. 10- 32 x 1/2" hex. hd | - | X | |
Lockwasher No. 10 | - | X | |
Electrical wiring gasoline tank gauge cable clip | - | X | |
Electrical wiring generator cable Insulator (Loom) t-1 (5-1/2" long) | - | X | |
Electrical wiring generator cable insulator (Loom) (15-1/2" long) | - | X | |
Electrical horn cable assembly-left | - | X | |
Electrical wiring horn cable | - | X | |
Electrical wiring horn cable grommet | - | X | |
Electrical wiring Instrument board cable clip | - | X | |
Electrical wiring instrument board cable clip | - | X | |
Electrical wiring lamp cable insulator | - | X | |
Electrical wiring lamp front cable to frame clip | - | X | |
Electrical wiring lamp front cable to frame clip screw 1/4-28 x 3/4" hex. hd | - | X | |
Nut 1/4-28 | - | X | |
Washer 5/16" plain | - | X | |
Lockwasher 1/4" | - | X | |
Electrical wiring lamp front cable clip | - | X | |
Electrical wiring lamp front cable insulator | - | X | |
Electrical wiring lamp front cable insulator to fender bracket | - | X | |
Bolt No. 10-32 x 5/8" fill, hd | - | X | |
Nut No. 10-32 plain | - | X | |
Lockwasher 3/16" | - | X | |
Electrical wiring lamp front ground cable bolt 1/4-28 1/2" hex. hd | - | X | |
Nut 1/4-28 plain | - | X | |
Washer 1/4" | - | X | |
Lockwasher 1/4" | - | X | |
Electrical wiring lamp rear right cable clip (Style No. 18) | - | X | |
Screw No. 10-32 x 1/2" fill, hd | - | X | |
Lockwasher 3/16" | - | X | |
Nut No. 10-32 plain | - | X | |
Electrical wiring lamp rear left cable clip | - | X | |
Electrical wiring lamp rear left cable clip (Style No. 18) | - | X | |
Electrical wiring lamp rear insulator | - | X | |
Electrical wiring motor support insulator (Loom) | - | X | |
Electrical wiring radiator drain cock insulator (Loom) ! | - | X | |
Electrical wiring rear channel cable clip | - | X | |
Nut No. 10-32 | - | X | |
Bolt No. 10-32 x 1/2" fill, hd | - | X | |
Lockwasher No. 10 | - | X | |
Electrical wiring running board lamp cable clip | - | X | |
Electrical wiring running board lamp cable clip | - | X | |
Washer plain | - | X | |
Bolt No. 10-32 x 1/2" fill, hd | - | X | |
Nut No. 10-32 | - | X | |
Lockwasher No. 10 | - | X | |
Electrical wiring running board lamp conduit strap clamp t | - | X | |
Electrical wiring steering gear to frame cable clip | - | X | |
Electrical wiring steering gear to frame cable clip | - | X | |
Screw 1/4-28 x 5/8" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Nut 1/4-28 plain | - | X | |
Clip | - | X | |
Electrical wiring steering gear lighting SWITCH terminal block assembly | - | X | |
Electrical wiring stop light cable insulator (Loom) | - | X | |
Electrical wiring stop light switch cable clip | - | X | |
Screw No. 10-32 x 1/2" fill, hd | - | X | |
Nut No. 10-32 | - | X | |
Lockwasher 3/16" | - | X | |
Electrical wiring strap clamp | - | X | |
Electrical wiring toe board insulator (Loom) | - | X | |
Electrical wiring toe board insulator left (Loom) | - | X | |
ELECTRICAL - ELECTRICAL | |||
| Part Number | Part Description | Application / Note | QTY |
Electrical wiring-toe board insulator left | - | X | |
Electrical wiring assembly-toe board grommet-left | - | X | |
Electrical wiring assembly-toe board grommet-right | - | X | |
Electrical wiring toe board insulator right (Loom) | - | X | |
ELECTRICAL - IGNITION COIL AND SWITCH | |||
| Part Number | Part Description | Application / Note | QTY |
Nut No. 10-32 | - | X | |
Secondary screw terminal | - | X | |
Lead assembly | - | X | |
Terminal | - | X | |
Lock and plate assembly | - | X | |
Lock and plate assembly | (Use with steering gear 1-21/32" longer than standard | X | |
Lock plate | - | X | |
Terminal | - | X | |
Lock assembly | - | X | |
Nut | - | X | |
Nut plug wl th key | - | X | |
Coils and mtg. plate assembly | - | X | |
Insulating bushing | - | X | |
Coil and case assembly | - | X | |
Rivet tubular 3/16 x 7/32" | - | X | |
Terminal | - | X | |
Lockwasher No. 10 | - | X | |
Screw No. 10-32 x 1/4" fill, hd IGNITION COIL AND SWITCH (Electric Auto-Lite No. CE-4022) The following parts are listed with the manufacturers' piece numbers and are to be ordered by these numbers Dealers should order these parts through their distributor | - | X | |
Lock cable assembly-compartment | - | X | |
Terminal | - | X | |
Lock cable assembly | - | X | |
Lock cylinder adopter spring | - | X | |
Nc- 6-32 hex. nut | - | X | |
Nc | - | X | |
Coils and bracket assembly | - | X | |
Coil bracket | - | X | |
Jumper lead assembly | - | X | |
Terminal | - | X | |
S Ignition coil part assembly | - | X | |
Coil cover | - | X | |
Rubber gasket | - | X | |
Plain steel washer | - | X | |
No. 10-32 Nut | - | X | |
No. 10 Lockwasher | - | X | |
No. 10-32 Cap nut | - | X | |
Name plate | - | X | |
No. 10 Lockwasher | - | X | |
No. 2 x 3/16 Drive screw | - | X | |
No. 10-32 x 7/16 fill, head screw | - | X | |
No. 10-32 x 5/16 fill, head screw INSTRUMENT BOARD | - | X | |
ELECTRICAL - LAMP | |||
| Part Number | Part Description | Application / Note | QTY |
Lamp front-assembly | - | X | |
Lamp front-and auxiliary bulb | - | X | |
Lamp front-body assembly | - | X | |
Lamp front-bracket-left | - | X | |
Lamp front-bracket-right | - | X | |
Lamp front-bracket bottom cover | - | X | |
Retaining screw No. 10-32 x 7/16" fill, head | - | X | |
Lockwasher 3/16" | - | X | |
Lamp front-bracket plug | - | X | |
Lamp front-bracket to fender screw 3/8-24 x 11/16" carriage | - | X | |
Lamp front-bracket to fender screw nut 3/8-24 | - | X | |
Lamp front-bracket to radiator shell pad | - | X | |
Lamp front-bracket reinforcing plate right | - | X | |
Lamp front-bracket reinforcing plate left | - | X | |
Lamp front-bracket reinforcing plate screw | - | X | |
Lockwasher 1/2" | - | X | |
Lamp front-bracket reinforcing plate gasket | - | X | |
Lamp front-bulb socket | - | X | |
Lamp front-bulb socket and cable | - | X | |
Lamp front-door and glass | - | X | |
Lamp front-door glass | - | X | |
Lamp front-door glass retainer | - | X | |
Lamp front-door latch hinge-threaded | - | X | |
Lamp front-door latch hinge-plain | - | X | |
Lamp front-door latch hinge-male | - | X | |
Lamp front-door latch | - | X | |
Lamp front-door latch hinge spring | - | X | |
Lamp front-door latch | - | X | |
Lamp front-gasket | - | X | |
Lamp front-reflector | - | X | |
Lamp front-reflector gasket assembly | - | X | |
Lamp front-retaining cup | - | X | |
Lamp front-retaining nut | - | X | |
Lamp front-retaining | - | X | |
Lamp front-brace bar | - | X | |
Lamp front-brace bar | - | X | |
Nut 7/16-20 blind 5508 Lockwasher 7/16" | - | X | |
Lamp fender-assembly | - | X | |
Lamp fender-base 7901 Lamp fender-base to b 5346 Lamp fender-base to b | - | X | |
Lamp fender-bulb retainer | - | X | |
Lamp fender-bulb socket | - | X | |
Lamp fender-door and glass | - | X | |
Lamp fender-door glass | - | X | |
Lamp fender-door gasket | - | X | |
Lamp fender-gasket | - | X | |
Lamp fender-bulb | - | X | |
Lamp fender-cable conduit | - | X | |
Lamp fender-clamping | - | X | |
Lamp fender-to fender screw 5728 Lockwasher 7/16" special | - | X | |
Lamp fender-inside cable | - | X | |
Lamp fender-lamp reflector | - | X | |
Lamp fender-yoke assembly | - | X | |
Lamp fender-yoke attaching screw | - | X | |
Lamp rear-left | - | X | |
Lamp rear-left (with blue bull's eye) | - | X | |
Lamp rear-right (with blue | - | X | |
Lamp rear-right 7711 Screw 1/4-20 x 5/8 5502 Lockwasher 1/4" 3868 Plain washer 1/4" | - | X | |
Lamp rear-bracket left | - | X | |
Lamp rear-bracket right | - | X | |
9 Lamp rear-bracket gasket 7804 Lamp rear-bracket to support bracket bolt (Screw 5/16-18 x 3/4" hex. hd.) 5504 Lockwasher 5/16" | - | X | |
0 Lamp rear-bracket license | - | X | |
2 Lamp rear-bracket license 5898 Screw 1/4-20 x 9/16" 5502 Lockwasher 1/4" | - | X | |
2 Lamp rear-bracket license | - | X | |
1 Lamp rear-bracket license tag plate clamp screw nut | - | X | |
Lockwasher 1/4" | - | X | |
Lamp rear-bracket support | - | X | |
Lamp rear-bracket support to frame screw 5/16-24 x 3/4" hex. hd. | (Used on 905 only; | X | |
Screw 5/16-24 x 7/6" hex. hd. | (Used on 906 only) | X | |
Lockwasher 5/16" | - | X | |
Nut 5/16-84 | - | X | |
Lamp rear-bracket support spacer | (Used on 906 only) | X | |
Lamp rear-bulb | - | X | |
Lamp rear-bulb retainer assembly | - | X | |
Lamp rear-door assembly | - | X | |
Lamp rear-door assembly (with blue bull's eye) | - | X | |
Lamp rear-door glass (with blue bull's eye) | - | X | |
Lamp rear-door glass | - | X | |
Lamp rear-door glass gasket | - | X | |
Lamp rear-door lock screw | - | X | |
Lamp rear-left license glass | - | X | |
Lamp rear-left license glass gasket | - | X | |
Lamp rear-left license glass retainer | - | X | |
Limp rear-left license glass retainer screw | - | X | |
Lamp rear-stop light bulb | - | X | |
Lamp running-board | - | X | |
Lamp running-board bulb | - | X | |
Lamp running-board cable connector | - | X | |
Lamp running-board cable connector Insulator | - | X | |
Lamp running-board conduit | - | X | |
Lamp running-board cable connector insulator | - | X | |
Lamp running-board glass and rim assembly | - | X | |
Lamp running-board socket assembly | - | X | |
Lamp running-board to splasher screw LAMP | - | X | |
Lamp front assembly-left | - | X | |
Lamp front assembly-right | - | X | |
Lamp front body assembly | - | X | |
Lamp front bracket left | - | X | |
Lamp front bracket right | - | X | |
Stud | - | X | |
Nut 7/16" | - | X | |
Lockwasher 7/16" | - | X | |
Bolt | - | X | |
Lockwasher 5/8" | - | X | |
Washer | - | X | |
Lamp front-bracket clamp screw 3/8-24 x 2-1/16" hex. hd | - | X | |
Lockwasher 3/8" | - | X | |
Nut 3/8-24 | - | X | |
Lamp front bracket to fender clamp plate | - | X | |
Lamp front bracket to fender gasket | - | X | |
Lamp front cable tube left assembly | - | X | |
Lamp front cable tube right assembly | - | X | |
Screw 1/4-28 x 5/6" hex. hd | - | X | |
Nut 1/4-28 | - | X | |
Lockwasher 1/4" | - | X | |
Lamp front contact plug assembly right | - | X | |
Lamp front contact plug assembly left | - | X | |
Lamp front contact plug set screw | - | X | |
Lamp front door and glass assembly right | - | X | |
Lamp front door glass assembly Lamp right | - | X | |
Lamp front door glass left | - | X | |
Lamp front door glass retainer | - | X | |
Lamp front door latch hinge (threaded) | - | X | |
Lamp front door latch hinge (plain) | - | X | |
Lamp front door latch hinge male | - | X | |
Lamp front door latch hinge pin | - | X | |
Lamp front, door latch hinge spring | - | X | |
Lamp front door latch hinge spring seat | - | X | |
Lamp front fender bracket junction box right | - | X | |
Lamp front fender bracket junction box left | - | X | |
Lamp front fender bracket Junction box plate | - | X | |
Nut 7/16-80 | - | X | |
Lockwasher 7/16" | - | X | |
Lamp front main bulb (32-32-32 C.P.) (Triple contact) | - | X | |
Lamp front main bulb sockets and cables assembly left | - | X | |
Lamp front main bulb sockets and cables assembly right | - | X | |
Lamp front main bulb retainer spring | - | X | |
Lamp front main bulb socket | - | X | |
Lamp front main bulb socket spring | - | X | |
Lamp front reflector right | - | X | |
Lamp front reflector left | - | X | |
Lamp front reflector gasket | - | X | |
Lamp fender assembly | - | X | |
Lamp fender base | - | X | |
Lamp fender base to body screw short | - | X | |
Lamp fender base to body screw long | - | X | |
Lamp fender bulb | - | X | |
Lamp fender bulb retainer assembly | - | X | |
Lamp fender bulb, socket spring | - | X | |
fender Inside cable | - | X | |
Lamp fender plate assembly Lamp clamping | - | X | |
Lamp fender door gasket | - | X | |
Lamp fender door and glass | - | X | |
Lamp fender door glass | - | X | |
Lamp fender to fender screw | - | X | |
Lamp fender gasket | - | X | |
Lamp fender reflector | - | X | |
Lamp fender yoke assembly | - | X | |
fender screw Lamp yoke attaching | - | X | |
Lamp rear right and bracket assembly | - | X | |
Lamp rear left and bracket assembly | - | X | |
Lamp rear right and bracket assembly | - | X | |
Lamp rear left and bracket assembly | - | X | |
Lamp rear left bracket | - | X | |
Lamp rear left bracket | - | X | |
Lamp rear right bracket | - | X | |
Lamp rear right bracket | - | X | |
Screw 5/16-18 x 3/4" hex. hd | - | X | |
Screw 5/16-18 x 5/8" hex. hd | - | X | |
Washer 5/16" | - | X | |
Lockwasher 5/16" std | - | X | |
Washer 5/16" "N" std | - | X | |
Lamp rear to bracket screw | - | X | |
Lamp rear bracket to fender gasket | - | X | |
Lamp rear bracket left to fender gasket | - | X | |
Lamp rear bracket right to fender gasket | - | X | |
Lamp rear bracket license tag plate | - | X | |
Lamp rear bracket license tag plate clip | - | X | |
' Screw 1/4-2,0 x 9/16" round head | - | X | |
Lockwasher 1/4" std | - | X | |
Lamp rear bracket license tag plate clamp screw | - | X | |
Lamp rear bracket license tag plate clamp screw nut | - | X | |
Lockwasher 1/4" std | - | X | |
Lamp rear loft body assembly | - | X | |
Lamp rear left body assembly | - | X | |
Lamp rear right body assembly | - | X | |
Lamp rear right body assembly | - | X | |
Lamp rear body grommet | - | X | |
Lamp rear bulb | - | X | |
Lamp rear bulb socket assembly | - | X | |
Lamp rear bulb socket assembly | - | X | |
Lamp rear bulb socket spring | - | X | |
Lamp rear cable assembly | - | X | |
Lamp rear cable Insulator | - | X | |
Lamp rear cable and sockets assembly | - | X | |
Lamp rear cable and sockets assembly | - | X | |
Lamp rear door and glass assembly | - | X | |
Lamp rear door and glass assembly | - | X | |
Lamp rear door glass | - | X | |
Lamp rear door glass gasket | - | X | |
Lamp rear door lock screw | - | X | |
Lamp rear left license glass | - | X | |
Lamp rear left license glass | - | X | |
Lamp rear left license glass gasket | - | X | |
Lamp rear left license glass gasket | - | X | |
Lamp rear license glass retainer | - | X | |
Lamp rear license glass retainer screw | - | X | |
Lamp rear stop light bulb (15 C.P.) | - | X | |
Lamp rear stop light cable assembly | - | X | |
Lamp running board | - | X | |
Lamp running board | - | X | |
board bulb Lamp running | - | X | |
Lamp running board cable connector | - | X | |
Lamp running board cable connector insulator | - | X | |
Lamp running board cable connector insulator | - | X | |
Lamp running board conduit | - | X | |
Lamp running board conduit | - | X | |
Lamp running board conduit clip | - | X | |
Lamp running board glass and rim assembly | - | X | |
Lamp running board socket assembly | - | X | |
Lamp running board to splasher screw | - | X | |
Lamp running board switch | (Used on body 739) LAMP | X | |
(Specify color) Lamp courtesy assembly | - | X | |
Lamp courtesy conduit | - | X | |
Lamp courtesy bulb | - | X | |
Lamp courtesy-glass and rim | - | X | |
Lamp courtesy-rim to fender screw | - | X | |
courtesy-socket Lamp assembly | - | X | |
name courtesy-SWITCH | - | X | |
Lamp fender assembly (Specify color) | - | X | |
Lamp fender bulb (Mazda No. 55 - 1-1/2 C.P.) | - | X | |
Lamp fender cable to fender bracket clip | - | X | |
Washer plain 13/64 x 5/8 x 1/16" | - | X | |
Lamp fender cable Insulator | - | X | |
Lamp fender clamping plate | - | X | |
Lamp fender door assembly | - | X | |
Lamp fender door glass | - | X | |
Lamp fender door glass gasket | - | X | |
Lamp fender extension cable assembly | - | X | |
Lamp fender extension cable connector tip-female | - | X | |
Lamp fender extension cable connector tip-male | - | X | |
Lamp fender extension cable connector tip insulator | - | X | |
Lamp fender to fender screw | - | X | |
Lockwasher 7/16" special | - | X | |
Lamp fender gasket | - | X | |
Lamp fender reflector | - | X | |
Lamp front assembly right (Without parking bulb) (Specify color) | - | X | |
Lamp front assembly right (Without parking bulb) (Chromium) | - | X | |
Lamp front assembly left (Without parking bulb) (Specify color) | - | X | |
Lamp front assembly left (Without parking bulb) -> (Chromium) | - | X | |
Lamp front assembly right (With parking bulb) (Specify color) | - | X | |
Lamp front assembly right (With parking bulb) (Chromium) | - | X | |
Lamp front assembly left (With parking bulb) (Specify color) | - | X | |
Lamp front assembly left (With parking bulb) (Chromium) | - | X | |
Lamp front body bead | - | X | |
Lamp front body bead retainer | - | X | |
Screw | - | X | |
Lamp front bracket left (Specify color) | - | X | |
Lamp front bracket left (Specify color) | - | X | |
Lamp front bracket right (Specify color) | - | X | |
Lamp front bracket right (Specify color) | - | X | |
Lamp front bracket to fender gasket left | - | X | |
Lamp front bracket to fender gasket left | - | X | |
Lamp front bracket to fender gasket right | - | X | |
Lamp front bracket to fender gasket right | - | X | |
Lamp front to bracket grommet | - | X | |
Lamp front to bracket grommet screw | - | X | |
Lamp front to bracket grommet screw | - | X | |
Lamp front bracket stud-long | - | X | |
Lamp front bracket stud-short | - | X | |
Washer 1/2" plain | - | X | |
Lockwasher 1/2" Shakeproof | - | X | |
Nut 1/2-20 | - | X | |
Lamp front bracket screw 1/2-13 hex. hd | - | X | |
Lamp front bulb | - | X | |
Lamp front connecting plug | - | X | |
Lamp front door fastening screw | - | X | |
Lamp front door fastening screw bracket | - | X | |
Lamp front door and glass assembly-right | - | X | |
Lamp -front door and glass assembly-left | - | X | |
Lamp front door glass-right | - | X | |
Lamp front door glass-left | - | X | |
Lamp front door glass retainer | - | X | |
Lamp front gasket | - | X | |
Lamp front mounting stud nut 1/2-13 | - | X | |
Lamp front parking bulb (Mazda No. 55 - 1-1/2 C.P.) | - | X | |
Lamp front reflector assembly | - | X | |
Lamp front reflector assembly | (Use with fender lamps) | X | |
Lamp front reflector gasket | - | X | |
ELECTRICAL - MOTOR DISTRIBUTOR | |||
| Part Number | Part Description | Application / Note | QTY |
Motor distributor | - | X | |
Motor distributor | - | X | |
Motor distributors | (Used with 6.8 to 1 cylinder head) | X | |
Motor distributor screw washer-special | - | X | |
Motor distributor bracket | - | X | |
Motor distributor bracket | - | X | |
Motor distributor bracket dowel | - | X | |
Motor distributor bracket retaining stud | - | X | |
Motor distributor bracket gasket | - | X | |
Motor distributor breaker point set | - | X | |
Motor distributor breaker point set | - | X | |
Motor distributor drive shaft assembly | - | X | |
Motor distributor drive shaft lock ring | - | X | |
Motor distributor lock plate | - | X | |
Screw 1/4-28 x 9/16" FlatHead | - | X | |
Motor distributor lock plunger | - | X | |
Motor distributor lock plunger body | - | X | |
Lockwasher 7/16" Everlock | - | X | |
Motor distributor lock plunger body nut | - | X | |
Motor distributor lock plunger knob | - | X | |
Motor distributor lock plunger spring | - | X | |
Motor distributor lock ring | - | X | |
Screw 1/4-88 x 1-7/16" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Nut 1/4-28 plain | - | X | |
No. 10-32 Nut | - | X | |
Distributor drive rivet | - | X | |
Thrust washer | - | X | |
Distributor drive coupling | - | X | |
Thrust washer | - | X | |
Terminal insulation | - | X | |
Terminal post No. 10-32 | - | X | |
Insulation washer | - | X | |
Insulation bushing | - | X | |
Distributor cap nut | - | X | |
No. 10-32 nut | - | X | |
Oil wick | - | X | |
A Drive shaft and governor assembly | - | X | |
Weight assembly | - | X | |
Weight spring | - | X | |
Drive shaft assembly | - | X | |
Governor control spring | - | X | |
Distributor cap cover | - | X | |
Distributor cap assembly | - | X | |
Contact spring | - | X | |
Contact spring plunger | - | X | |
Rotor assembly | - | X | |
Contact spring | - | X | |
Contact spring plunger | - | X | |
Breaker cam oiler | - | X | |
Distributor base assembly | - | X | |
Name plate | - | X | |
Absorbent bronze bearing | - | X | |
0 Distributor cap spring and bracket assembly | - | X | |
Distributor cap spring bracket | - | X | |
Hinge pin | - | X | |
Distributor cap spring | - | X | |
Felt wick | - | X | |
1/4" oiler press in elbow | - | X | |
No. 6-32 x 1/4" fill. hd. screw | - | X | |
No. 6 lockwasher | - | X | |
No. 12 x 3/16" escutcheon pin | - | X | |
Base plate assembly | - | X | |
Plain steel washer | - | X | |
Breaker arm spring clip | - | X | |
Breaker point | - | X | |
Condenser assembly | - | X | |
Condenser assembly | - | X | |
Breaker arm assembly | - | X | |
Breaker sub plate assembly | - | X | |
Breaker point lock nut | - | X | |
Breaker point screw | - | X | |
Primary connector assembly | - | X | |
Terminal | - | X | |
Terminal | - | X | |
Primary connector assembly | - | X | |
Terminal | - | X | |
Terminal | - | X | |
Breaker plate part assembly | - | X | |
No. 6 Lockwasher | - | X | |
No. 8 Lockwasher | - | X | |
No. 6-32 x 5/16" rnd. hd. screw | - | X | |
No. 8 Plain washer | - | X | |
No. -10 Lockwasher | - | X | |
No. 10-32 x 5/16" fill, hd. screw | - | X | |
No. 6-32 x 5/16" fill. hd. screw | - | X | |
Oiler assembly | - | X | |
Oil wick | - | X | |
Breaker arm spring | - | X | |
No. 6 Lockwasher | - | X | |
No. 6-32 x 5/16" fill. hd. screw | - | X | |
No. 6-32 x 3/8" fill. hd. screw | - | X | |
Breaker camshaft assembly | - | X | |
Flat felt guard | - | X | |
1/2" special lockwasher | - | X | |
1/2-20 nut | - | X | |
Felt washer | - | X | |
Spacing washer | - | X | |
Stop plate | - | X | |
Cam and shaft | - | X | |
Ball bearing | - | X | |
No. 10-32 x 1/2" fill. hd. screw | - | X | |
No. 10 brass washer | - | X | |
No. 8 Lockwasher | - | X | |
No. 10 Lockwasher | - | X | |
No. 8 Plain washer | - | X | |
3/8" elbow oiler | - | X | |
No. 10-32 x 3/8" fill. hd. screw | - | X | |
No. 8-32 x, 3/8" fill, hd. screw | - | X | |
No. 10-32 Nut | - | X | |
Shaft thrust washer I I I -I | - | X | |
Dist. drive coupling I 1 f -I | - | X | |
Thrust washer | - | X | |
Distributor drive rivet | - | X | |
Terminal Insulation | - | X | |
Terminal post No. 10-32 | - | X | |
Insulating washer | - | X | |
Insulating bushing | - | X | |
Distributor cap nut | - | X | |
No. 10-32 Nut | - | X | |
Oil wick | - | X | |
LA Drive shaft and Gov. assembly | - | X | |
Weight spring | - | X | |
Weight assembly | - | X | |
L Drive shaft assembly | - | X | |
Distributor cap assembly | - | X | |
Contact spring | - | X | |
Contact spring plunger | - | X | |
Rotor assembly | - | X | |
Contact spring | - | X | |
Contact spring plunger | - | X | |
Oiler assembly | - | X | |
Oil wick | - | X | |
3/8 Elbow oiler | - | X | |
Breaker cam oiler | - | X | |
Distributor base assembly | - | X | |
Name plate | - | X | |
Absorbent bronze bearing | - | X | |
Dist. cap spring and bracket assembly | - | X | |
Dist. cap spring bracket | - | X | |
Dist. cap spring | - | X | |
Felt wick | - | X | |
1/4 Oiler - press in elbow | - | X | |
No. 6-32 x 1/4" fill. hd. screw | - | X | |
No. 6 Lockwasher | - | X | |
No. 13 x 3/16 Escutcheon pin | - | X | |
Breaker plate assembly | - | X | |
Plain steel washer | - | X | |
Breaker arm spring clip | - | X | |
Condenser assembly | - | X | |
Condenser assembly | - | X | |
Primary connector assembly | - | X | |
Terminal | - | X | |
Terminal | - | X | |
Primary connector assembly | - | X | |
Terminal | - | X | |
Terminal | - | X | |
Breaker plate part assembly | - | X | |
Breaker sub plate assembly | - | X | |
Breaker point lock nut | - | X | |
Breaker point screw | - | X | |
Breaker point | - | X | |
Breaker arm assembly | - | X | |
Breaker arm spring | - | X | |
No. 6 Lockwasher | - | X | |
No. 6 Lockwasher | - | X | |
No. 6-32 x 5/16" rnd. hd. screw | - | X | |
No. 8 Plain washer | - | X | |
No. 10 Lockwasher | - | X | |
No. 10-32 x 5/16" fill. hd. screw | - | X | |
No, 6-32 x 3/16" fill. hd. screw | - | X | |
No. 6 Lockwasher | - | X | |
No. 8-32.x 3/8" fill. hd. screw | - | X | |
B Breaker cam shaft assembly | - | X | |
Flat felt guard | - | X | |
1/2 20 Nut | - | X | |
Felt;washer | - | X | |
Spacing washer | - | X | |
Stopiplate | - | X | |
1/2 Special lockwasher i l i-i | - | X | |
Cam and shaft | - | X | |
Ball bearing | - | X | |
No. 10-32 x 1/2" fill. hd. screw HCti | - | X | |
No. 10 Brass washer _. N tO | - | X | |
No. 6 Lockwasher | - | X | |
No. 10 Lockwasher | - | X | |
No. 8 Plain washer | - | X | |
No. 10-32 x 3/8" fill. hd. screw rH W rHCVj | - | X | |
No. 6 Lockwasher | - | X | |
No. 6-32 x 5/16" fill. hd. screw H rH | - | X | |
No. 8-32 x 3/8" fill. hd. screw rH | - | X | |
ELECTRICAL - MOTOR GENERATOR | |||
| Part Number | Part Description | Application / Note | QTY |
Motor generator (Supersedes 209074) | - | X | |
Motor generator (Supersedes 215265) | - | X | |
Motor generator | - | X | |
Motor generator | - | X | |
Motor generator to gear cover stud | - | X | |
Nut 7/16" plain | - | X | |
Lockwasher 7/16" | - | X | |
Motor generator to gear cover stud | - | X | |
Motor generator to gear cover stud nut 1/2-20 | - | X | |
Lockwasher l/2" Shakeproof extra heavy | - | X | |
Washer 1/2" | - | X | |
Motor generator to gear cover stud washer | - | X | |
Motor generator to gear cover screw-long | - | X | |
Lockwasher 1/2" | - | X | |
Motor generator retaining screw washer | - | X | |
Motor generator pulley | - | X | |
Motor generator pulley | - | X | |
Motor generator pulley | - | X | |
Key No. 7 Woodruff | - | X | |
Lockwasher | - | X | |
Nut 3/4-16 plain special | - | X | |
Lockwasher No | - | X | |
Through bolt lockwasher | - | X | |
Lockwasher No | - | X | |
Lockwasher No. 10 | - | X | |
41 Through bolt nut | - | X | |
80 Brush ring nut | - | X | |
0Q Cutout terminal nut | - | X | |
Q06 bearing cap | - | X | |
51Q Pole screw | - | X | |
Q12 Brush ring retaining screw (short) | - | X | |
014 Brush ring retaining screw (long) | - | X | |
004 Brush lead screw | - | X | |
005 Commutator end cover screw | - | X | |
004 Battery charge regulator screw | - | X | |
Regulator terminal screw lockwasher | - | X | |
Fuse holder | - | X | |
Battery charge regulator and cutout | - | X | |
Commutator end bearing cap gasket | - | X | |
Oiler (DE bearing) | - | X | |
Commutator end felt washer | - | X | |
Commutator end felt washer retainer | - | X | |
Armature shaft nut (CE) | - | X | |
Lockwasher No. 10 special | - | X | |
Shakeproof washer | - | X | |
Commutator end bearing retaining ring | - | X | |
Commutator end bearing | - | X | |
Commutator end felt washer cup | - | X | |
Fuse spring | - | X | |
Fuse | - | X | |
Fuse insulation | - | X | |
Adjusting pinion | - | X | |
Adjusting pinion spring washer | - | X | |
Adjusting pinion washer | - | X | |
Battery charge regulator and cutout insulation | - | X | |
Through bolt insulator | - | X | |
Brush ring | - | X | |
Main brush | - | X | |
Control brush | - | X | |
Third brush advance stop | - | X | |
Brush spring and arm (Control) | - | X | |
Brush spring and arm (Main) | - | X | |
Commutator end housing | - | X | |
Commutator end housing assembly | (Not illustrated) | X | |
Woodruff key | - | X | |
Pole piece | - | X | |
Armature | - | X | |
Drive end housing | - | X | |
Field frame | - | X | |
Drive end felt washer retainer | - | X | |
Drive end bearing retainer ring | - | X | |
Drive end felt washer | - | X | |
Oil felt wick | - | X | |
Drive end bearing | - | X | |
Drive end bearing cap assembly | - | X | |
Commutator end bearing cap | - | X | |
Field coil assembly | - | X | |
Commutator end cover | - | X | |
Through bolt | - | X | |
Dowel pin (Commutator end housing frame) | - | X | |
Through bolt lockwasher | - | X | |
Lockwasher No. 6 | - | X | |
Lockwasher No. 8 | - | X | |
Lockwasher No. 10 | - | X | |
00 Hand hole cover band nut | - | X | |
00 Cutout stud nut | - | X | |
004 Regulator terminal screw | - | X | |
006 Commutator end bearing cap screw | - | X | |
016 Hand hole cover band screw | - | X | |
412 Pole piece screw | - | X | |
004 Control holding spring screw | - | X | |
006 Drive end bearing cap screw | - | X | |
004 Brush lead screw | - | X | |
004 Battery charge regulator mounting screw | - | X | |
Regulator terminal screw lockwasher | - | X | |
Fuse holder | - | X | |
Control holding spring lockwasher | - | X | |
Battery charge, regulator and cutout assembly | - | X | |
Commutator end bearing cap gasket | - | X | |
Oiler | - | X | |
CE felt washer | - | X | |
CE felt washer retainer | - | X | |
Lockwasher No. 10 special | - | X | |
CE bearing retaining ring | - | X | |
Commutator end bearing | - | X | |
Commutator end felt washer cup | - | X | |
Fuse spring | - | X | |
Fuse | - | X | |
Fuse insulation | - | X | |
Adjusting pinion spring washer | - | X | |
Adjusting pinion washer | - | X | |
Battery charge regulator and cutout insulation | - | X | |
Woodruff key No | - | X | |
Pole piece | - | X | |
Adjusting pinion | - | X | |
Drive end bearing | - | X | |
Hand hole cover band | - | X | |
Insulating tube | - | X | |
Control brush (for Generator Type CO-1119 and CO-1166) | - | X | |
Control brush (for Generator Type CO-1241) | - | X | |
Main brush (for Generator Type CO-1241) | - | X | |
Main brush (for Generator Type CO-1119 and CO-1166) | - | X | |
Commutator end cap | - | X | |
Armature nut | - | X | |
Control brush holding spring | - | X | |
Drive end housing | - | X | |
Field frame | - | X | |
Field frame | - | X | |
Drive end bearing retainer | - | X | |
Drive end felt retainer | - | X | |
Drive end gasket | - | X | |
Drive end felt washer | - | X | |
Drive end felt retainer | - | X | |
Drive end felt washer | - | X | |
Through bolt | - | X | |
Armature (for Generator Type CO-1241) | - | X | |
Field coil assembly | - | X | |
Commutator end housing assembly (for Generator Type CO-1119 and CO-1166) | - | X | |
Commutator end housing assembly (for Generator Type CO-1241) | - | X | |
Control brush holder assembly | - | X | |
Brush holder spring arm assembly-main | - | X | |
Brush holder spring arm assembly-control | - | X | |
Oil wick-commutator end | (Not illustrated) | X | |
Dowel pin-commutator end | (Not Illustrated) | X | |
Hand hole band locating pin | - | X | |
Hand hole band assembly | - | X | |
Cooling pipe | - | X | |
Cooling pipe screen | - | X | |
08 Screw | - | X | |
Bracket | - | X | |
Bracket screw | - | X | |
Distributor,bolt lock washer Through | - | X | |
Lockwasher No | - | X | |
Lockwasher No. B | - | X | |
Lockwasher No. 10 | - | X | |
Brush holder rivet washer | - | X | |
Q Cutout stud nut | - | X | |
04 Regulator terminal screw | - | X | |
06 C. E. bearing cap screw | - | X | |
08 Cooling pipe mounting screw | - | X | |
12 Pole piece screw | - | X | |
04 Control brush holder spring screw | - | X | |
06 D. E. bearing cap screw | - | X | |
04 Brush lead screw | - | X | |
04 Cutout regulator mounting screw | - | X | |
06 Cutout terminal screw | - | X | |
Regulator terminal screw lock washer | - | X | |
Fuse holder | - | X | |
Control brush holder lockwasher | - | X | |
Cutout cover | - | X | |
C. E. bearing cap gasket | - | X | |
Oiler | - | X | |
C. E. felt washer | - | X | |
C. E. felt washer retainer | - | X | |
Lockwasher No. 10 heavy | - | X | |
C. E. bearing retaining ring | - | X | |
C. E. bearing | - | X | |
C. E. felt washer cup | - | X | |
Fuse spring | - | X | |
Fuse Insulation | - | X | |
Adjusting pinion spring washer | - | X | |
Adjusting pinion washer | - | X | |
Cutout-regulator Insulation | - | X | |
Fuse | - | X | |
Woodruff Key No. 7 | - | X | |
Pole piece | - | X | |
Adjusting pinion | - | X | |
0. E. bearing | - | X | |
Through belt insulating tube | - | X | |
Control brush holder support | - | X | |
Control brush holder insulation | - | X | |
Control brush holder spacer | - | X | |
C. E. bearing cap | - | X | |
Armature nut | - | X | |
Brush holder insulating bushing | - | X | |
Control brush holder rivet | - | X | |
Main brush holder rivet | - | X | |
Main brush holder bushing (Gr.) | - | X | |
Control brush holder spring | - | X | |
D. E. bearing retainer | - | X | |
D. E. felt retainer | - | X | |
D. E. gasket | - | X | |
D. E. felt washer | - | X | |
D. E. felt retainer | - | X | |
D. E. felt washer | - | X | |
Through bolt | - | X | |
Field coll assembly | - | X | |
Control brush holder assembly | - | X | |
Control brush holder assembly | - | X | |
Brush holder spring arm assembly-main | - | X | |
Brush holder spring arm assembly control | - | X | |
Oil wick - commutator end | - | X | |
Main brush holder insulation live | - | X | |
Main brush holder plate (Gr.) | - | X | |
Main brush - 2 used | - | X | |
Control brush - 1 used | - | X | |
C. E. housing assembly | - | X | |
Main brush holder assembly | - | X | |
Armature | - | X | |
D. E. housing | - | X | |
Mounting bracket | - | X | |
Mounting bracket screw | - | X | |
Field frame | - | X | |
Cooling pipe | - | X | |
Hand hole band locating pin | - | X | |
Cooling pipe screen | - | X | |
Hand hole band assembly | - | X | |
Dowel pin cooling pipe | - | X | |
Cutout - regulator assembly | - | X | |
Lockwasher 5/16" | - | X | |
Frame Screw | - | X | |
Frame and field assembly | - | X | |
Frame Screw Ins. tube | - | X | |
Pole piece | - | X | |
Field coll assembly Comp | - | X | |
Ins. tube | - | X | |
Terminal | - | X | |
Terminal | - | X | |
Ins. bushing | - | X | |
Mounting Bracket | - | X | |
Screw 5/16-18 x 7/16" flat hd | - | X | |
Nut 3/4-16 hex | - | X | |
Lockwasher 3/4" | - | X | |
Lead Ins | - | X | |
C. B. lead assembly | - | X | |
Wire Clip | - | X | |
Terminal | - | X | |
Inst bushing | - | X | |
Field coil - 0. R | - | X | |
Field coll - L. R | - | X | |
Field coll - L. L | - | X | |
Field coil - U. L | - | X | |
Head bend aligning pi n | - | X | |
ELECTRICAL - COMMUTATOR END PLATE ASSEMBLY | |||
| Part Number | Part Description | Application / Note | QTY |
12 Pole piece screw | - | X | |
Lockwasher No. 6 | - | X | |
Lockwasher No. 10 | - | X | |
Gasket | - | X | |
Ball bearing - S.A.E. No. 202 | - | X | |
C. E. cap cover | - | X | |
Brush - 3rd | - | X | |
Brush - Main | - | X | |
Comm, end plate assembly | - | X | |
Washer No. 6 Shakeproof | - | X | |
1/4 Oiler - Hinged top | - | X | |
Felt washer | - | X | |
Felt washer retainer | - | X | |
Lock spring ring | - | X | |
Felt guard | - | X | |
Spring washer | - | X | |
Snap ring | - | X | |
3rd brush plate adjusting pinion | - | X | |
3rd brush plate retaining spring | - | X | |
Felt wick | - | X | |
Brush spring | - | X | |
3rd brush holder plate assembly | - | X | |
Brush spring | - | X | |
Comm, end plate part assembly | - | X | |
04 Screw No. 6-32 x 1/4" round hd | - | X | |
04 Screw No, 6-32 x 1/4" round hd | - | X | |
04 Screw No. 10-32 x 1/4" round hd | - | X | |
No. 7 Woodruff Key | - | X | |
ELECTRICAL - ARMATURE ASSEMBLY | |||
| Part Number | Part Description | Application / Note | QTY |
Nut 9/16-18 hex | - | X | |
Armature assembly | - | X | |
Drive pulley | - | X | |
ELECTRICAL - DRIVE PULLEY | |||
| Part Number | Part Description | Application / Note | QTY |
Drive end head assembly | - | X | |
Lockwasher No. 8 | - | X | |
1/4 Oiler - Press in type | - | X | |
Ball bearing - S.A.E. No. 205 | - | X | |
Bearing retainer | - | X | |
Felt washer retainer | - | X | |
Gasket | - | X | |
Felt washer | - | X | |
Felt washer retainer | - | X | |
Felt washer | - | X | |
Oil wick | - | X | |
Drive end head | - | X | |
Q6 Screw No. 8-2E x 3/8" rnd. hd | - | X | |
ELECTRICAL - MISCELLANEOUS PARTS | |||
| Part Number | Part Description | Application / Note | QTY |
Lockwasher No. 10 | - | X | |
Head bend assembly | - | X | |
C. B. and Reg. assembly | - | X | |
0 Nut No. 10-38 hex | - | X | |
Lockwasher No | - | X | |
Fuse retainer | - | X | |
Washer No 10 Shakeproof | - | X | |
Cover | - | X | |
Lockwasher No. 10 | - | X | |
Spring | - | X | |
Fuse Amp | - | X | |
Insulation | - | X | |
Base Insulation | - | X | |
04 Screw No. 6-32 x 1/4" rnd. hd | - | X | |
04 Screw No. 8-32 x 1/4" rnd. hd | - | X | |
06 Screw No. 10-32 x 3/8" rnd, hd | - | X | |
Q4 Screw No. 10-32 x 1/4" rnd. hd MOTOR IGNITION | - | X | |
ELECTRICAL - MOTOR IGNITION | |||
| Part Number | Part Description | Application / Note | QTY |
Motor ignition high tension cable terminal insulator TO | - | X | |
Motor ignition high tension cable tube assembly R.H | - | X | |
Motor ignition high tension cable tube assembly L.H | - | X | |
Motor ignition high tension cable to spark plug No right loom 11" long | - | X | |
Motor Ignition high tension cable to spark plug No right loom 5- 1/2" long | - | X | |
Motor Ignition high tension cable to spark plug terminal-female | - | X | |
Motor Ignition high tension cable to spark plug terminal-male | - | X | |
Motor Ignition spark plug (AC) | - | X | |
Motor ignition spark plug (champion) | - | X | |
Motor ignition spark plug gasket | (Use with champion plug) | X | |
Motor ignition spark plug gasket | (Use with AC plug) | X | |
Motor Ignition spark plug nut | - | X | |
Motor ignition spark plug nut | - | X | |
Motor Ignition spark plug cable terminal-female distributor end | - | X | |
Motor Ignition spark plug cable terminal - spark plug end | - | X | |
Motor Ignition spark plug cable terminal-male distributor end | - | X | |
Motor ignition spark plug cable tube assembly - left bank | - | X | |
Motor Ignition spark plug cable tube assembly - right bank | - | X | |
Motor ignition high tension cable tube carburetor throttle retracting spring bracket | - | X | |
ELECTRICAL - MOTOR STARTER | |||
| Part Number | Part Description | Application / Note | QTY |
Motor starter motor and switch assembly | - | X | |
Motor starter motor and switch assembly 11 | - | X | |
Screw 1/2-20 x 1-1/2" hex. hd | - | X | |
Lockwasher 1/2" MOTOR STARTER MOTOR AND MAGNETIC SWITCH (Owen-Dyneto Type DN-1072 and DN-1162) The following parts are listed with the manufacture ers' piece numbers and are to be ordered by these numbers. Dealers should order these parts through their distributor | - | X | |
Terminal post nut lock washer | - | X | |
0 Brush ring screw nut | - | X | |
10 Brush ring screw | - | X | |
08 Commutator end housing screw | - | X | |
1Q Bendix support attaching screw | - | X | |
10 Pole piece screw | - | X | |
05 Switch mounting screw | - | X | |
G6 Brush lead screw | - | X | |
05 Commutator end cover screw | - | X | |
2 Bendix drive spring (for Starter Motor Type DN-1072) | - | X | |
2 Bendix spring (for Starter Motor Type DN-1162) | - | X | |
3 Bendix driving head (for Starter Motor Type DN-1162) | - | X | |
3 Bendix driving head (for Starter Motor Type DN-1072) | - | X | |
4 Bendix drive clip (for Starter Motor Type DN-1072) | - | X | |
5 Bendix lock screw (for Starter Motor Type DN-1072) | - | X | |
5 Shaft spring screw (for Starter Motor Type DN-H62) | - | X | |
-6 Drive head spring screw (for Starter Motor Type DN-1162) | - | X | |
7 Bendix lock washer (for Starter Motor Type DN-1162) | - | X | |
6 Bendix driving screw (for Starter Motor Type DN-1072) | - | X | |
Name plate | (not illustrated) | X | |
Armature shaft drive end shim washer (thin) | - | X | |
Brush spring | - | X | |
Bendix drive key | - | X | |
Field frame | - | X | |
Pole piece | - | X | |
Terminal post brass washer (thin) | - | X | |
Terminal post insulating bushing | - | X | |
Terminal post nut | - | X | |
Armature | - | X | |
Terminal post brass washer (thick) | - | X | |
Thrust washer (inner) | - | X | |
Thrust washer .' | - | X | |
Bendix (outer) | - | X | |
Bendix support bushing (small) | - | X | |
support bushing' (large) | - | X | |
Commutator end housing bushing Brush ring assembly | - | X | |
Brush (short lead - used) | - | X | |
Brush (long lead - 1 used) | - | X | |
Brush lead insulation | - | X | |
Field coil | - | X | |
Commutator end housing assembled with brush ring | (not illustrated) See parts number 136628, 13581 | X | |
Commutator end housing with bushing | - | X | |
Commutator end cover | - | X | |
CE housing assembly complete with brush ring and brushes | (not illustrated) | X | |
Bendix drive complete | (not illustrated) (for Starter Motor Type DN-1072) | X | |
Bendix drive complete | (not illustrated) (for Starter Motor Type BN-1162) | X | |
-1 Bendix gear and shaft assembly (for Starter Motor Type DN-1162) | - | X | |
1 Bendix gear and shaft assembly (for Starter Motor | - | X | |
Type DN-1072) Bendix drive lock washer | - | X | |
Connector magnetic switch to starter terminal (DN Motor) | - | X | |
Terminal post | - | X | |
Connector magnetic switch to starter terminal (DI Motor) | - | X | |
Brush lead screw and brush ring screw lock washer | - | X | |
Name plate driving screw | - | X | |
Commutator end cover pin MOTOR STARTER MOTOR AND MAGNETIC SWITCH (Owen-Dyneto Type DN-1273) The following parts are listed with the manufacture ers1 piece numbers and are to be ordered by these numbers. Dealers should order these parts through their distributor | - | X | |
Magnetic switch terminal screw lock washer | - | X | |
Terminal post lock washer | - | X | |
Brush lead screw lock washer | - | X | |
0C Brush ring screw nut | - | X | |
010 Brush ring screw | - | X | |
410 Pole piece screw | - | X | |
306 CE housing screw | - | X | |
310 Bendix support attaching screw | - | X | |
005 Switch mounting screw | - | X | |
006 Switch base screw | - | X | |
04 Screw - trash lead to ground | - | X | |
005 CB cover screw | - | X | |
Name plate | - | X | |
Armature shaft DE shim washer (thin) | - | X | |
Bendlx drive key | - | X | |
Terminal post nut | - | X | |
Armature | - | X | |
Thrust washer (Inner) | - | X | |
Thrust washer (outer) | - | X | |
Bendlx support bushing (small) | - | X | |
Bendlx support bushing (large) | - | X | |
CE housing bushing | - | X | |
Brush ring assembly | - | X | |
Brush (short lead - 3 used) | - | X | |
Brush (long lead - 1 used) | - | X | |
Brush lead Insulation | - | X | |
Pole piece | - | X | |
Field coll | - | X | |
CE housing assembled with brush ring (See parts Nos. 13581 and 13628) | - | X | |
CE housing with bushing | - | X | |
CE cover | - | X | |
CE housing assembly complete with brush ring and brushes | - | X | |
Terminal post insulating washer | - | X | |
Terminal post Insulating bushing | - | X | |
Switch terminal washer (Plain) | - | X | |
Brush spring | - | X | |
Terminal post | - | X | |
Connector - magnetic switch to terminal post | - | X | |
Bendlx drive support | - | X | |
Field frame | - | X | |
-2 Bendix spring | - | X | |
-3 Bendix drive head | - | X | |
-5 Bendix shaft spring screw | - | X | |
-6 Bendix drive head spring screw | - | X | |
-7 Bendix lock washer | - | X | |
8 Screw - brush lead to field terminal | - | X | |
Bendix drive complete | - | X | |
-1 Bendix pinion sub-assembly | - | X | |
Switch terminal nut | - | X | |
Switch terminal insulating bushing | - | X | |
Switch terminal (long) | - | X | |
Switch terminal insulator (outer) | - | X | |
Switch magnet assembly | - | X | |
Switch terminal Insulator (Inner) | - | X | |
Switch terminal (short) | - | X | |
Switch cover | - | X | |
Switch base | - | X | |
Magnetic switch complete | - | X | |
Switch cover screw | - | X | |
Brush lead screw lock washer | - | X | |
8 Name plate drive screw | - | X | |
CE cover pin | - | X | |
Field connection ins | - | X | |
Frame and Field Assembly | - | X | |
Lockwasher 5/16" | - | X | |
Terminal washer | - | X | |
Nut 5/16-18 hex | - | X | |
Pole piece | - | X | |
Field coil assembly-comp | - | X | |
Ins. washer | - | X | |
Ins. bushing | - | X | |
Terminal post | - | X | |
Connector | - | X | |
41Q Pole piece screw COMMUTATOR END HEAD ASSEMBLY | - | X | |
Lock washer No. 10 | - | X | |
Brush-short pigtail | - | X | |
Brush-long pigtail | - | X | |
Comm. End head assembly | - | X | |
00 Nut No. 10-32 hex | - | X | |
Absorbent bronze bearing | - | X | |
Brush holder plate assembly | - | X | |
Brush spring | - | X | |
Lock washer No. 10 | - | X | |
Dowel pin | - | X | |
010 Screw No. 10-32 x 5/8" rnd. hd | - | X | |
Cover | - | X | |
Screw No. 10-32 x 3/8" bdg. hd | - | X | |
dasher - No. 10 Shakeproof | - | X | |
306 Screw 1/4-20 x 1/2" flat hd | - | X | |
004 Screw No. 10-32 x 1/4" round hd | - | X | |
005 Screw No. 8-32 x 5/16" round hd ARMATURE ASSEMBLY | - | X | |
Thrust washer | - | X | |
No. 6 Woodruff key | - | X | |
Armature assembly | - | X | |
Thrust washer | - | X | |
Thrust washer | - | X | |
01 Solenoid starting switch I | - | X | |
S6 Lock washer No. 10 | - | X | |
2 Nut 5/16-24 hex | - | X | |
014 Lock washer 5/16" | - | X | |
72 Nut No. 10-32 hex | - | X | |
Lock washer No. 10 | - | X | |
005 Screw No. 10-32 x 5/16" round hd. I I I 4 Cv MISCELLANEOUS PARTS | - | X | |
Pinion housing assembly | - | X | |
Absorbent bronze bearing | - | X | |
Absorbent bronze bearing | - | X | |
Bendix drive assembly | - | X | |
310 Screw 1/4-20 x 5/8" flat hd MOTOR SUPPORT | - | X | |
Motor support front assembly - left | - | X | |
Motor support front assembly - right | - | X | |
Motor support front assembly - left | - | X | |
Motor support front assembly - left | (Used only on bodies D758-D759-D858-9-4000-1-2-3) | X | |
Motor support front assembly- right | - | X | |
Motor support front assembly - right | (Used only on bodies D758-D7 59-D858-9-4000-1-2-3) | X | |
Motor support front-bolt | - | X | |
Nut 1/2-20 | - | X | |
Plain washer 1/2" | - | X | |
Lockwasher 1/2" | - | X | |
Motor support front brace | - | X | |
Motor support front liner | - | X | |
Motor support front mounting plate screw-long 5/16-24 x 1" | - | X | |
Screw-short 5/16-24 x 3/4" | - | X | |
Screw-long 5/16-24 x 7/8" | - | X | |
Screw-short 5/16-24 x 3/4" hex. hd | - | X | |
Lockwasher 5/16" | - | X | |
Nut 5/16-24 plain | - | X | |
Plain washer 5/16" | - | X | |
Motor support rear assembly | - | X | |
Motor support rear assembly | - | X | |
Motor support rear to frame channel bolt-short 3/8-24 x 7/8" | - | X | |
Motor support rear to frame channel bolt-long 3/8-24 x 1" | - | X | |
Motor support rear to frame channel-bolt-special (clutch pedal retracting spring support) | - | X | |
Lockwasher 3/8" | - | X | |
Plain washer 3/8" | - | X | |
Nut 3/8-24 plain | - | X | |
Motor support rear to motor bolt f<< | - | X | |
Nut 7/16" plain | - | X | |
Lockwasher 7/16" | - | X | |
Plain washer 7/16" | - | X | |
ELECTRICAL - STARTER SWITCH AUTOMATIC | |||
| Part Number | Part Description | Application / Note | QTY |
Automatic starter switch assembly (Black serial plate) | - | X | |
Automatic starter switch assembly (Serial plate-Red) | (Used with 00-1241generator) | X | |
Automatic starter switch bracket | - | X | |
Bolt 1/4-28 x 1-1/2" hex. hd | - | X | |
Lockwasher 1/4" U to o to | - | X | |
Nut 1/4-28 | - | X | |
Automatic starter switch cable clamps | - | X | |
Automatic starter switch cable clamps | - | X | |
Automatic starter switch safety cutout | - | X | |
Automatic starter switch cutout adopter | - | X | |
Automatic starter switch safety cutout union connection assembly | - | X | |
Automatic starter switch to safety cutout cable assembly | - | X | |
Automatic starter switch to safety cutout cable assembly | - | X | |
Automatic starter switch to starter motor cable assembly (Starter motor terminal) | - | X | |
Automatic starter switch to starter motor cable assembly (Starter motor terminal) | - | X | |
Automatic starter switch to starter motor cable assembly (Battery terminal) | - | X | |
Automatic starter switch to starter motor cable assembly (Battery terminal) | - | X | |
Automatic starter Ignition switch to safety cutout cable assembly | - | X | |
Automatic starter ignition switch to safety cutout cable assembly | - | X | |
ELECTRICAL - BODY WIRING (MISCELLANEOUS) | |||
| Part Number | Part Description | Application / Note | QTY |
Body feed cable terminal 13/64" eye | - | X | |
Body feed cable terminal insulator | - | X | |
Body ground cable terminal 5/16" eye -1 t-4 | - | X | |
Body wiring cable clip | - | X | |
Body wiring cable clip | - | X | |
Bonnet dash liner BONNET DASH LINER ns to A3 | - | X | |
Bonnet dash liner hook | - | X | |
Washer 3/16" "N" std | - | X | |
Nut No. 8-32 | - | X | |
ELECTRICAL - CABLES | |||
| Part Number | Part Description | Application / Note | QTY |
Body wiring cable 19 strand No. 16 (green braid) | - | X | |
Body wiring cable 19 strand No. 14 (green braid) | - | X | |
Body wiring cable 19 strand No. 16 (red braid) X x | - | X | |
Body wiring cable 19 strand No. 14 (red braid) X | - | X | |
Body wiring cable 19 strand No. 16 (black braid) | - | X | |
Body wiring cable 19 strand No. 16 (black with red tracer braid) | - | X | |
Body wiring cable staple-insulated | - | X | |
Body wiring cable terminal | - | X | |
Body wiring cable terminal | - | X | |
Body wiring cable terminal insulator | - | X | |
ELECTRICAL - CARPET | |||
| Part Number | Part Description | Application / Note | QTY |
Carpet folding seat floor assembly | - | X | |
Carpet front assembly | - | X | |
Carpet front assembly | - | X | |
Carpet front assembly | - | X | |
Carpet front assembly | - | X | |
Carpet rear assembly | - | X | |
Carpet rear assembly | - | X | |
Carpet rear assembly | - | X | |
Carpet rear assembly | - | X | |
ELECTRICAL - DOME LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Dome light | - | X | |
Dome light | - | X | |
Dome light bulb Mazda No. 81 6 CP. G-6 rH <-1 CU H | - | X | |
Dome light door SWITCH | - | X | |
Dome light glass and rim | - | X | |
Dome light reflector | - | X | |
Dome light reflector | - | X | |
Dome light switch 3 point | - | X | |
ELECTRICAL - REAR QUARTER LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Rear quarter light | - | X | |
Rear quarter light bulb 7V. 3 C.P. G-6 single contact | - | X | |
Rear quarter light glass and rim | - | X | |
Rear quarter light reflector | - | X | |
Rear quarter light SWITCH | - | X | |
ELECTRICAL - TONNEAU LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Tonneau ra light assembly | - | X | |
Tonneau light bulb 7V. 3 CP. G-6 single contact | - | X | |
Tonneau glass and rim row | - | X | |
Tonneau light reflector | - | X | |
Tonneau light SWITCH light | - | X | |
Tonneau light switch plunger plate | - | X | |
ELECTRICAL - BODY WIRING (MISCELLANEOUS) | |||
| Part Number | Part Description | Application / Note | QTY |
Body feed cable terminal 13/64" eye | - | X | |
Body feed cable terminal 3/16" eye | - | X | |
Cable terminal Insulator | - | X | |
Body ground cable terminal 1/4" eye | - | X | |
Body ground cable terminal screw 1/4-28 x 1/2" hex. hd | - | X | |
Lockwasher 1/4" Std | - | X | |
Nut 1/4-28 | - | X | |
Body wiring cable clip | - | X | |
Body wiring cable clip | - | X | |
Body wiring cable clip | - | X | |
ELECTRICAL - DOME LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Dome light | - | X | |
Dome light-rear | - | X | |
Dome light-front | - | X | |
Dome light bulb (Mazda No. 81) tO tO tO 6 CP G-6 | - | X | |
Dome light door switch cable assembly | - | X | |
Dome light door switch cable assembly | - | X | |
Dome light door switch cable assembly. 1 r-t | - | X | |
Dome light door switch cable assembly | - | X | |
Dome light door switch cable assembly | - | X | |
Dome light door SWITCH | - | X | |
Screw No. 6-40 x 3/8" oval hd mach | - | X | |
Dome light glass and rim | - | X | |
Dome light front to instrument board SWITCH | - | X | |
Dome light rear to instrument board SWITCH | - | X | |
Dome light reflector (Two bulb) | - | X | |
Dome light reflector (One bulb) r | - | X | |
Dome light switch (3 point) | - | X | |
Dome light to ground cable assembly | - | X | |
Dome light to ground cable assembly | - | X | |
Dome light to ground cable assembly | - | X | |
ELECTRICAL - REAR QUARTER LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Rear quarter light | - | X | |
Screw No. 10-32 x 5/8" flat hd. | - | X | |
Rear quarter light bulb 7 V. 3CP G-6 M ro re re re re re re single contact | - | X | |
Rear quarter light glass and rim | - | X | |
Rear quarter light reflector | - | X | |
Rear quarter light SWITCH | - | X | |
ELECTRICAL - TONNEAU LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Tonneau light assembly | - | X | |
Tonneau light bulb | - | X | |
Tonneau light-glass and rim | - | X | |
Tonneau light reflector | - | X | |
Tonneau light SWITCH | - | X | |
Tonneau light switch plunger plate | - | X | |
ELECTRICAL - BODY WIRING | |||
| Part Number | Part Description | Application / Note | QTY |
Body feed cable terminal 13/64" eye H | - | X | |
Body feed cable terminal 7/32" eye I 4 | - | X | |
Body feed cable terminal 3/16" eye | - | X | |
Cable terminal insulator | - | X | |
Cable terminal insulator | - | X | |
Body wiring cable | - | X | |
Body wiring cable clip | - | X | |
Body wiring cable clip | - | X | |
Body wiring shield ground 739 Screw No. 10-32 x 1/2" 003 Nut No. 10-32 | - | X | |
Body wiring shield ground terminal 13/64" eye | - | X | |
Bonnet dash liner BONNET DASH LINER | - | X | |
Bonnet dash liner | - | X | |
Bonnet dash liner hook 866 Washer 3/16" "N" std. 700E Nut No. 8-3 2 | - | X | |
Call buzzer complete 6108 Call buzzer screw No. 6-40 x 1/2" rnd 3866 Call buzzer screw washer 3/16" 3516 Call buzzer screw lockwasher No. 6 7001 Call buzzer screw nut No. 6-40 | - | X | |
Clock (Partition header) C | - | X | |
Clock (Partition | - | X | |
Dictograph receiver | - | X | |
9 Dictograph transmitter and winder assembly | - | X | |
Dictograph winder 5310 Screw Ho. 8-38 x 5695 Lockwasher No. 8 special | - | X | |
Dictograph winder bracket | - | X | |
ELECTRICAL - DOME LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Dome light | - | X | |
Dome light-rear | - | X | |
Lome light-front | - | X | |
Come bulb (Mazda No. | - | X | |
Come light door switch cable light | - | X | |
Dome light door switch cable assembly | - | X | |
8 Lome light door switch cable assembly | - | X | |
Dome light door switch cable | - | X | |
6 Dome light door switch cable assembly | - | X | |
Dome light door SWITCH | - | X | |
8016 Come Screw No. 6-40 x 3/ | - | X | |
Dome light finishing moulding gasket light | - | X | |
Dome light glass and rim | - | X | |
Dome light front to Instrument board SWITCH | - | X | |
Dome light rear to instrument board SWITCH | - | X | |
Dome light reflector (Two bulb) | - | X | |
Dome light reflector (One bulb) | - | X | |
Dome light switch (3 point) | - | X | |
Dome light to ground cable assembly | - | X | |
Dome light to ground cable assembly | - | X | |
Dome light to ground cable assembly | - | X | |
ELECTRICAL - TONNEAU LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
TONNEAU LIGHT | - | X | |
Tonneau light assembly | - | X | |
Tonneau light bulb | - | X | |
Tonneau light-glass and rim | - | X | |
Tonneau light reflector | - | X | |
Tonneau light SWITCH Tonneau light switch plunger plate | - | X | |
ELECTRICAL - ELECTRICAL | |||
| Part Number | Part Description | Application / Note | QTY |
Electrical body wiring cable (19 strand Ot, 16 Ga. green braid) (Bulk stock) | - | X | |
Electrical body wiring cable (19 strand No. 12 Ga. green braid) (Bulk stock) | - | X | |
Electrical body wiring cable (19 strand No. 12 Ga. red braid) (Bulk stock) | - | X | |
Electrical body wiring cable (19 strand No. 16 Ga. red braid) (Bulk stock) | - | X | |
Electrical body wiring cable (19 strand No. 16 Ga. black braid) (Bulk stock) | - | X | |
Electrical body wiring cable (19 strand No. 16 Ga. black with red tracer braid) (Bulk stock) | - | X | |
Electrical body wiring cable connector tip male | - | X | |
Electrical body wiring cable groove clip | - | X | |
Electrical body wiring cable staple insulated No. 1 x 1/2 | - | X | |
Electrical dictograph receiver (round type) | - | X | |
Electrical dictograph receiver (flat type) -I | - | X | |
Electrical dictograph receiver to body fuse cable assembly | - | X | |
Electrical dictograph transmitter and winder assembly | - | X | |
Electrical dictograph winder | - | X | |
Screw Ho. 8-32 x 3/8" round hd | - | X | |
Lockwasher No. 8 | - | X | |
Nut No. 8-32 | - | X | |
Electrical dictograph winder bracket | - | X | |
Screw 1/4-28 x 1/2" round hd | - | X | |
Lockwasher 1/4 | - | X | |
Nut 1/4-28 | - | X | |
Electrical do | - | X | |
Electrical dome light front H | - | X | |
Electrical done light rear | - | X | |
Electrical dome light bulb (Mazda No. 81) 6 CPG-6 to rH H to H <-H rH | - | X | |
Electrical:cal dome light door switch w t W CU W EM C | - | X | |
Electrical dome light door sw itch cable assembly | - | X | |
Electrical dome light door switch cable assembly rH | - | X | |
Electrical done light door switch cable assembly | - | X | |
Electrical done light door switch cable assembly | - | X | |
Electrical done light door switch cable assembly | - | X | |
Electrical dome light door switch cable assembly | - | X | |
Electrical dome light door switch cable assembly 1 rH | - | X | |
Electrical dome 1 i ght glass and rim | - | X | |
Electrical done light (front) instrument board switch (2 point) | - | X | |
Electrical dome light (rear) instrument board switch (3 point) | - | X | |
Electrical dome light reflector (2 sockets) | - | X | |
Electrical dome light reflector H H (1 socket) | - | X | |
Electrical dome light switch (3 point) | - | X | |
Electrical rear quarter light | - | X | |
Screw No. 10-32 x 1" flat hd | - | X | |
Electrical rear quarter light bulb 7V 3 CP G-6 single contact | - | X | |
Electrical rear quarter light glass and rim | - | X | |
Electrical rear quarter light SWITCH (2 point) | - | X | |
Electrical rumble seat compartment light bulb 7V single contact | - | X | |
Electrical rumble seat compartment light disconnector plug socket | - | X | |
Electrical rumble seat compartment light switch (2 point) | - | X | |
Electrical running board light door switch | - | X | |
ELECTRICAL - TONNEAU LIGHT | |||
| Part Number | Part Description | Application / Note | QTY |
Tonneau light | - | X | |
Tonneau light glass and rim | - | X | |
Tonneau light reflector TOP | - | X | |
ELECTRICAL - LAMPS | |||
| Part Number | Part Description | Application / Note | QTY |
Lamp front assembly-right | (Use with body 880) | X | |
Lamp front assembly-right | (Use with bodies 275-280) | X | |
Lamp front assembly-left | (Use with body 280) | X | |
Lamp front assembly-left | (Use with bodies 275-280) | X | |
Lamp rear and bracket assembly-right | (Use with body275) | X | |
Lamp rear and bracket assembly-left | (Use with body 275) | X | |
Lamp rear bracket-right | (Use with body 275) | X | |
Lamp rear bracket-left | (Use with body 275) | X | |
Lamp rear bracket to body screw | (Use with body E75) | X | |
Lamp rear bracket to body screw lock washer | (Use with body 275) | X | |
Lamp rear bracket gasket | (Use with body 275) | X | |
