|
Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
|
1932-1937 Twelve - FUEL
FUEL - ACCELERATOR | |||
| Part Number | Part Description | Application / Note | QTY |
Accelerator pedal | - | X | |
Accelerator pedal | - | X | |
Accelerator pedal bracket | - | X | |
Lockwasher 3/8n | - | X | |
Nut 3/8" | - | X | |
Nut 3/8-24 blind | - | X | |
Washer 3/8" plain | - | X | |
Lockwasher 7/16" | - | X | |
Taper pin No. 0 x 3/4" | - | X | |
Accelerator pedal insulating sleeve | - | X | |
Insulating washer | - | X | |
Accelerator pedal hole cover | - | X | |
Screw 1/4-28 x 1-3/8" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Accelerator pedal retracting spring | - | X | |
Accelerator pedal shaft | - | X | |
Accelerator pedal shaft assembly | (Not used with clutch control) | X | |
Accelerator pedal shaft assembly | (Used only with clutch control) | X | |
Accelerator pedal shaft assembly | - | X | |
Accelerator pedal shaft bracket-right | - | X | |
Accelerator pedal shaft bracket-left | - | X | |
Accelerator pedal shaft bracket-left | - | X | |
Screw 1/4-28 x 3/4" hex. hd | - | X | |
Screw 1/4-88 x 1-1/8" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Accelerator pedal shaft bracket retainer | - | X | |
Accelerator pedal shaft lever | - | X | |
Accelerator pedal shaft lever | (Used only with clutch control) | X | |
Accelerator pedal shaft lever | (Not used with clutch control) | X | |
Accelerator pedal shaft lever | - | X | |
Taper pin No. 0 x 3/4" | - | X | |
Accelerator pedal shaft lever free | - | X | |
Spring washer 7/16" (Supersedes 166436) | - | X | |
Washer 7/16" plain | - | X | |
Accelerator pedal shaft lever conn, link (Prior to Frame No. 900450) | - | X | |
Accelerator pedal shaft lever conn, link (After Frame No. 900449) | - | X | |
Yoke end pin 1/4" | - | X | |
Cotter pin 1/16 x 1/2" | - | X | |
Accelerator pedal shaft lever to carburetor throttle valve shaft conn, rod | - | X | |
Accelerator pedal shaft lever to carburetor throttle valve shaft conn, rod | (Not used with clutch control) | X | |
Accelerator pedal shaft lever to carburetor throttle valve shaft conn, rod | (Used with clutch control only) | X | |
Accelerator pedal shaft lever to carburetor throttle valve conn, rod | - | X | |
Ball Joint No. 10-32 R.H. thd. | (Not used with clutch control) | X | |
Ball Joint (L.H. thd.) | - | X | |
Ball joint (R.H. thd.) | (Used with clutch control) | X | |
Nut No. 10-32 (R.H. thd.) | - | X | |
Nut No. 10-32 (L.H. thd.) | - | X | |
Lockwasher No. 10 | - | X | |
Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring | - | X | |
Accelerator pedal shaft lever to carburetor throttle valve conn, rod retracting spring bracket | - | X | |
Accelerator pedal shaft spring | - | X | |
Washer 7/16" | - | X | |
FUEL - GASOLINE | |||
| Part Number | Part Description | Application / Note | QTY |
Gasoline fuel pump Inlet hose assembly | - | X | |
Gasoline tank assembly | - | X | |
Gasoline tank assembly | - | X | |
Gasoline tank assembly | - | X | |
Gasoline tank drain plug 1/4" hex. M | - | X | |
Gasoline tank drain plug 3/8" countersunk hd | - | X | |
Gasoline tank drain plug 3/8" hex. hd | - | X | |
Gasoline tank to frame rear channel bracket lower | - | X | |
Gasoline tank to frame rear channel bracket lower | - | X | |
Gasoline tank to frame rear channel bracket lower | - | X | |
Gasoline tank to frame rear channel bracket upper | - | X | |
Gasoline tank to frame rear channel bracket upper | - | X | |
Gasoline tank to frame rear charnel bracket upper | - | X | |
Bolt 5/16-24 x 7/8" hex. hd | - | X | |
Bolt 5/16-24 x 1-1/8" hex. hd | - | X | |
Lockwasher 5/16" | - | X | |
Nut 5/16-24 plain | - | X | |
Gasoline tank to frame rear intermediate channel bracket lower | - | X | |
Gasoline tank to frame rear Intermediate channel bracket lower | - | X | |
Gasoline tank to frame rear Intermediate channel bracket lower | - | X | |
Gasoline tank to frame rear intermediate channel bracket to upper | - | X | |
Gasoline tank to frame rear Intermediate channel bracket to upper | - | X | |
Gasoline tank to frame rear intermediate channel bracket \ to upper | - | X | |
Bolt 5/16-24 x 7/8" hex- hd | - | X | |
Bolt 5/16-24 x 1-1/8" hex. hd | - | X | |
Lockwasher 5/16" | - | X | |
Nut 5/16-24 plain hex | - | X | |
Gasoline tank to frame rear channel bracket spacer | - | X | |
Gasoline tank to frame rear intermediate channel bracket spacer | - | X | |
Gasoline tank to frame Junction tube assembly | - | X | |
Gasoline tank to frame Junction tube assembly | - | X | |
Union nut 5/16" flared tube | - | X | |
Union nut 3/8" flared tube | - | X | |
Nut 3/8" flared tube inverted | - | X | |
Gasoline tank to motor carburetor frame Junction | - | X | |
Lockwasher 11/16" | - | X | |
Nut 11/16-16 | - | X | |
Union nut flared tube | - | X | |
Gasoline tank gauge assembly | - | X | |
Gasoline tank gauge assembly (After frame No. 901200) | - | X | |
Gasoline tank gauge assembly (Prior to frame No. 901201) rl | - | X | |
Gasoline tank gauge assembly | - | X | |
Screw No. 10-32 x 1/2" fill, head | - | X | |
Gasket | - | X | |
Gasoline tank gauge tube bushing | - | X | |
Gasoline tank Inlet cover assembly | - | X | |
Gasoline tank inlet cover assembly | - | X | |
Gasoline tank inlet cover gasket | - | X | |
Gasoline tank Inlet gasket | - | X | |
Gasoline tank Inlet to lamp bracket screw No. 10-32 i-i/a | - | X | |
Lockwasher 3/16" | - | X | |
Gasoline tank inlet tube assembly | - | X | |
Rivet | - | X | |
Gasoline tank inlet tube flange screw 1/4-28 x 5/8 hex, hd | - | X | |
Lockwasher 1/4 | - | X | |
Gasoline tank Inlet screw bracket | - | X | |
Gasoline tank inlet tube flange to tank flange gasket | - | X | |
Gasoline tank inlet tube flexible coupling | - | X | |
Gasoline tank support bracket front | - | X | |
Gasoline tank support bracket front reinforcement | - | X | |
Gasoline tank support bracket front reinforcement | - | X | |
Gasoline tank support bracket rear reinforcement | - | X | |
Rivet | - | X | |
Gasoline tank support bracket rear reinforcement | - | X | |
Rivet | - | X | |
Gasoline tank support bracket screw | - | X | |
Nut 7/16-20 plain SAE | - | X | |
Lock wire (5" long) | - | X | |
Gasoline tube front assembly | (Used on 905 only) | X | |
Gasoline tube front assembly | (Used on 906 only) | X | |
Union nut 5/16" flared tube | - | X | |
Union nut 5/16" flared tube | - | X | |
Gasoline tube front clip | - | X | |
Gasoline tube front clip | - | X | |
Screw No. 10-32 x 5/8" fill, hd | - | X | |
Washer 3/16" plain | - | X | |
Lockwasher- No. 10 | - | X | |
Nut No. 10-32 SAE | - | X | |
Gasoline tube frame to fuel pump assembly | - | X | |
Nut flared tube inverted (Weatherhead) | - | X | |
- | - | X | |
Gasoline tube frame Junction | - | X | |
Lockwasher 7/8" (Shakeproof) | - | X | |
Nut 7/8-14 | - | X | |
Nut 3/8" flared tube inverted (Weatherhead) ) | - | X | |
Gasoline tube outer assembly | (Used on 1005-1107) r (Supersedes 209360) | X | |
Gasoline tube outer assembly | (Used on 1006-1108) (Supersedes 209361) | X | |
Clip | - | X | |
Clip | - | X | |
Screw No. 10-32 x 5/8" fill, hd | - | X | |
Washer 3/16" | - | X | |
Lockwasher No. 10 | - | X | |
Nut No. 10-32 | - | X | |
Clip boltless | - | X | |
Nut 3/8 inverted | - | X | |
Gasoline tube outer to frame shield | - | X | |
Screw | - | X | |
Gasoline fuel pump Inlet tube assembly (Supersedes 225680) | - | X | |
Gasoline tank assembly | (Used with bodies 832-33-34-35- 821-31-30-L194-L195-932-33-34-35-21-31-30-L294-L295) . i-H | X | |
Gasoline tank assembly | (Use with bodies 827-36-37-38-39- rH 73-927-36-37-38-39-73) | X | |
Gasoline tank drain plug 3/8 hex. hd | - | X | |
Gasoline tank to frame bracket rear left | (Use with bodies 832-33-34-35-L194-L195-932-33-34-35-L294-L295) | X | |
Gasoline tank to frame bracket rear right | (Use with bodies 833-34-35-632-L194-L195-932-33-34-35-L294-L295) | X | |
Screw 5/16-24 x 11/16 hex. hd. | (Use with bodies 832-33-34-35-821-31-30-L194-L195-932-33-34-35-21- <3) 31-30-L294-L295) | X | |
Lockwasher 5/16 | (Use with bodies 832-33-34-36-821- 31-30-L194-L195-632-33-34-35-21-31-30-L294-L295) . CO | X | |
Nut 5/16-24 | (Use with bodies 832-33-34-35-821-31-30- L194-L195-932-33-34-35-21-31-30-L294-L295) | X | |
Gasoline tank to frame bracket rear right | (Use with bodies 830-21-31-930-21-31) | X | |
Gasoline tank to frame bracket rear left | (Use with bodies 830-21-31-930-21-31) | X | |
Gasoline tank to frame rear channel bracket upper | (Use on bodies 836-37-38-827-839-873-936-37-38-27-73-39) | X | |
Gasoline tank to frame rear channel bracket lower | (Use on bodies 836-37-38-827-839-73-936-37-38-27-39-73) | X | |
Screw 5/16-24 x 11/16 hex. hd. | (Use on bodies 836- tfr- 37-38-827-839-873-936-37-38-27-39-73) | X | |
Lockwasher 5/16 | (Use on bodies 836-37-38-827-39-73- 936-37-38-27-39-73) | X | |
Nut 5/16-24 | (Use with bodies 836-37-38-827-39-73- 936-37-38-27-39-73) | X | |
Gasoline tank to frame rear intermediate channel bracket upper | (Used on bodies 832-33-34-35-36-37-38-39-27-73- L194-L195-932-33-34-35-36-37-38-39-27-73-L294-L295) | X | |
Gasoline tank to frame rear intermediate channel bracket lower | (Used on bodies 832-33-34-35-36-37-38-39-27-73- L194-L195-932-33-34-35-36-37-38-39-27-73-L294-L296) | X | |
Gasoline tank to frame rear intermediate channel bracket upper | (Use with bodies 830-21-31-921-31-30) | X | |
Gasoline tank to frame rear intermediate channel bracket lower | (Use with bodies 830-21-31-921-31-30) | X | |
Bolt 5/16-24 x 7/8 hex. hd | - | X | |
Lockwasher- 5/16" | - | X | |
Nut 5/16-24 | - | X | |
Gasoline tank gauge assembly | (Use with bodies 832-33-34- 35-821-31-30-L194-LI95-932-33-34-35-21-31-30-L294- L295) | X | |
Gasoline tank gauge assembly | (Use with bodies 836-37-38- I I H rH 827-39-73-932-33-34-35-21-30-L294-L295) | X | |
Screw No. 10-32 x 1/2" fill, hd | - | X | |
Binding post nut | - | X | |
Lockwasher No. 10 (Shakeproof) | - | X | |
Gasoline tank gauge gasket | - | X | |
Gasoline tank inlet cap assembly | - | X | |
Gasoline tank inlet cover assembly (Supersedes 190845) | - | X | |
Gasoline tank inlet cover gasket (Supersedes 190847) | - | X | |
Gasoline tank inlet to fender screw | - | X | |
Lockwasher No. 10 | - | X | |
Gasoline tank Inlet flange gasket | (Use with.bodies 621- 831-32-33-34-35-830-L194-L195-921-31-32-33-34-35-L294- L295-930) | X | |
Gasoline tank inlet tube assembly | (Use with bodies 836- 37-38-827-39-73-936-37-38-27-39-73) | X | |
Gasoline tank Inlet tube assembly | (Use with bodies 832- 33-34-35-L194-L194-932-33-34-35-L294-L295) (Supersedes 823235) | X | |
Gasoline tank Inlet tube assembly | (Use with bodies 830- 21-31-930-21-31) (Supersedes 223235) | X | |
Gasoline tank inlet tube elbow gasket | (Use with bodies B36-7-8-9-27-73-936-37-38-39-27-73) | X | |
Gasoline tank inlet tube flange screw 1/4-28 x 5/8" hex. hd | - | X | |
Lockwasher 1/4" | - | X | |
Gasoline tank inlet tube flange gasket | - | X | |
Gasoline tank Inlet tube to wheel compartment bottom grommet | (Use with bodies 836-37-38-827-39-873-936-37- 38-27-39-73) | X | |
Screw No, 6 x 1/2 Parker Kalon | (Use with bodies 836- 1 CD CO 37-38-827-39-873-936-37-38-27-39-73) | X | |
Washer-plain | (Use with bodies 836-37-38-827-39-873) 1 CD | X | |
Gasoline tank inlet tube to wheel compartment bottom grommet retainer-inner | (Use with bodies 836-7-8-827-39- 73-936-37-38-39-27-73) | X | |
Gasoline tank inlet tube to wheel compartment bottom grommet retainer-outer | (Use with bodies 836-7-8-827-39- 73-936-37-38-927-39-73) | X | |
Gasoline tank Inlet tube to wheel housing grommet | - | X | |
Gasoline tank inlet tube to wheel housing grommet screw No. 6 x 1/2 Parker Kalon | - | X | |
Washer-plain | - | X | |
Gasoline tank support bracket | (Use with bodies 836-37-38- 827-39-873-956-37-38-27-39-73) | X | |
Gasoline tank support bracket front | (Use with bodies 832- 33-34-35-821-31-30-L194-LI95-932-33-34-35-21-31-30- L294-L295) | X | |
Rivet 1/8 x 1/2 | (Use with bodies 832-33-34-35-821-31- 30-L194-L195-932-33-34-35-21-30-L294-L295) | X | |
Rivet 1/8 x 1/2 | (Use with bodies 836-37-38-827-39-73- 02 02 936-37-38-27-39-73) | X | |
Gasoline tank support bracket rear | (Use with bodies 332- 33-34-35-821-31-30-L194-L195-932-33-34-35-21-31-30- to L294-L295) | X | |
Rivet 1/8 x 1/2 | (Use with bodies 832-33-34-35-821-31- (7) 30-LI94-L195-932-33-34-35-B1-31-30-L294-L295) | X | |
Gasoline tank support bracket screw | - | X | |
Washer 7/16" special | - | X | |
Nut 7/16-20 | - | X | |
Lock wire 5" long | - | X | |
Gasoline tube assembly | (Use on 1207-1407) | X | |
Gasoline tube assembly | (Use on 1208-1408) | X | |
Gasoline tube assembly clip | - | X | |
Gasoline tube assembly clip | - | X | |
Gasoline tube assembly clip | - | X | |
Screw No. 10-32 x 3/4" fill, head | - | X | |
Washer 3/8" special | - | X | |
Lockwasher No. 10 | - | X | |
Washer 5/16 | - | X | |
Nut No. 10-32 | - | X | |
Gasoline tube assembly union nut 3/8 | - | X | |
Gasoline tube connection-front | - | X | |
Gasoline tube to frame shield | - | X | |
Screw No. 14 x 5/8 binding head (Parker Kalon) | - | X | |
Gasoline tube insulator-front | - | X | |
Gasoline tube Insulator-rear IGNITION COIL AND SWITCH (Electric Auto-Lite No. CE-4020) The following parts are listed with the manufacturers' piece numbers and are to be ordered by these numbers Dealers should order these parts through their distributor. << | - | X | |
FUEL - MOTOR CARBURETOR | |||
| Part Number | Part Description | Application / Note | QTY |
Motor carburetor assembly | - | X | |
Motor carburetor assembly | - | X | |
Motor carburetor assembly | - | X | |
Motor carburetor gasket equipment | - | X | |
Motor carburetor gasket | - | X | |
Motor carburetor front chamber baffle | - | X | |
Motor carburetor retaining stud | - | X | |
Nut 3/8-24 | - | X | |
Motor carburetor retracting spring | - | X | |
Motor carburetor silencer assembly | - | X | |
Motor carburetor silencer gasket MOTOR CARBURETOR AUTOMATIC CHOKE | - | X | |
Motor carburetor automatic choke assembly | - | X | |
Motor carburetor automatic choke assembly | - | X | |
Motor carburetor automatic choke to carburetor conn rod assembly | - | X | |
Motor carburetor automatic choke to carburetor throttle lever control rod ball Joint nut | - | X | |
Motor carburetor automatic choke to manifold gasket r | - | X | |
Motor carburetor automatic choke to carburetor throttle lever control rod assembly | - | X | |
Ball joint | - | X | |
Motor carburetor automatic choke to carburetor choke rod assembly | - | X | |
Air horn (comp.) | - | X | |
9 Air horn | - | X | |
3L Choke lever (comp.) | - | X | |
Clamp screw | - | X | |
7L Choke lever stem | - | X | |
1L Choke lever stem collar | - | X | |
L Choke lever stem collar | - | X | |
Choke lever stem collar set screw | - | X | |
Choke valve (comp.) | - | X | |
Choke valve screw | - | X | |
Float chamber cover plug | - | X | |
Clamp screw | - | X | |
Air horn attaching screw | - | X | |
Air horn attaching screw | - | X | |
Air horn attaching screw lockwasher | - | X | |
Air horn gasket | - | X | |
Air horn attaching stud | - | X | |
Air horn attaching stud | - | X | |
Air horn attaching stud nu t | - | X | |
Air horn attaching stud nut | - | X | |
Air horn attaching stud lockwasher | - | X | |
Boon, by pass jet (comp.) | - | X | |
Float needle valve | - | X | |
Float needle valve seat | - | X | |
Float needle valve seat gasket | - | X | |
Float with lever (comp.) | - | X | |
Float hanger | - | X | |
Float fulcrum screw | - | X | |
Float fulcrum screw gasket | - | X | |
Idle needle valve | - | X | |
Idle needle valve spring | - | X | |
Idle tubes (comp.) | - | X | |
Idle air bleeders | - | X | |
Idle air bleeders channel plugs | - | X | |
Idle channel screw plug | - | X | |
Idle channel drive plug | - | X | |
Main body | - | X | |
Main body gasket | - | X | |
Main body attaching screw | - | X | |
Main body attaching screw lockwasher | - | X | |
Main discharge Jets | - | X | |
Main discharge Jets plug | - | X | |
Main discharge Jets plug gaskets | - | X | |
Metering Jets | - | X | |
Pump check valve (comp.) | - | X | |
Pump check valve channel plug | - | X | |
Pump piston and link (comp.) | - | X | |
Spring | - | X | |
Pump discharge nozzles | - | X | |
Pump lever (comp.) | - | X | |
Pump lever stop screw | - | X | |
Pump lever fulcrum screw | - | X | |
Pump lever fulcrum screw washer | - | X | |
Pump lever fulcrum screw spring washer | - | X | |
Pump lever locking screw | - | X | |
Pump spring | - | X | |
Pump splash washer | - | X | |
Pump rod (comp.) | - | X | |
Pump rod washer | - | X | |
Pump rod washer cotter pi n | - | X | |
Pump link washer | - | X | |
Pump link washer cotter pin | - | X | |
Pump housing | - | X | |
Pump housing attaching screw | - | X | |
Pump discharge nozzle plugs | - | X | |
Pump discharge nozzle plugs | - | X | |
Pump discharge channel plugs | - | X | |
Throttle valve body | - | X | |
Throttle valve | - | X | |
Throttle valve screw | - | X | |
Throttle valve screw lockwasher | - | X | |
Throttle lever and stem (comp.) | - | X | |
Throttle stop screw | - | X | |
Throttle stop spring | - | X | |
FUEL - AUTOMATIC CHOKE | |||
| Part Number | Part Description | Application / Note | QTY |
Adjusting screw | - | X | |
Adjusting screw spring | - | X | |
Carburetor connecting rod (comp.) | - | X | |
Carburetor connecting rod and connection | - | X | |
Carburetor connecting rod choke lever | - | X | |
Carburetor connecting rod choke lever clamp screw | - | X | |
Carburetor connecting rod choke lever clamp screw nut | - | X | |
Carburetor connecting rod ball joint | - | X | |
Carburetor connecting rod ball joint nut | - | X | |
Carburetor connecting rod ball joint nut washer | - | X | |
Carburetor connecting rod ball joint lock nut | - | X | |
Check valve | - | X | |
Check valve bushing | - | X | |
Choke lever with stem (coop.) | - | X | |
Choke link with levers (comp.) | - | X | |
Choke link lever screw | - | X | |
Choke link lever set screw | - | X | |
Flange gasket | - | X | |
Kick lever with bushing | - | X | |
Kick lever set screw | - | X | |
Kick lever torsion spring | - | X | |
Kick lever torsion spring pin | - | X | |
Main body | - | X | |
Main body cover | - | X | |
Main body plate | - | X | |
Main body plate attaching screw | - | X | |
Piston kick lever | - | X | |
Piston stop pin | - | X | |
Piston spring | - | X | |
Piston washer | - | X | |
Piston with link (comp.) | - | X | |
Release lever with stem (comp.) | - | X | |
Release lever stem collar | - | X | |
Release lever stem collar set screw | - | X | |
Thermostat | - | X | |
Thermostat bracket | - | X | |
Thermostat bracket screw | - | X | |
Thermostat housing | - | X | |
Thermostat housing clamp with screw (comp.) | - | X | |
Clamp screw | - | X | |
Clamp screw nut | - | X | |
Thermostat pointer | - | X | |
Thermostat stem | - | X | |
Thermostat stem washer | - | X | |
FUEL - MOTOR CARBURETOR | |||
| Part Number | Part Description | Application / Note | QTY |
Air horn with valve (comp.) | - | X | |
Air horn | - | X | |
Choke balance lever | - | X | |
Choke balance lever clamp screw | - | X | |
Choke lever (comp.) | - | X | |
Choke lever clamp screw | - | X | |
Choke lever clamp screw nut | - | X | |
Choke lever stem | - | X | |
Choke stem washer | - | X | |
Choke stem collar | - | X | |
Choke stem collar set screw | - | X | |
Float chamber vent | - | X | |
Float chamber vent cap | - | X | |
Float chamber vent cap attaching screw _ | - | X | |
Choke valve (comp.) | - | X | |
Choke valve screws | - | X | |
Air horn attaching screw | - | X | |
Air horn attaching screw lock-washer | - | X | |
Air horn attaching screws | - | X | |
Air horn attaching stud | - | X | |
Air horn attaching stud nut | - | X | |
Air horn attaching stud nut lockwasher | - | X | |
Air horn gasket | - | X | |
Economizer by-pass jet | - | X | |
Float chamber cover screws | - | X | |
Float chamber cover screws lockwasher | - | X | |
Float fulcrum screw | - | X | |
Float fulcrum screw gasket | - | X | |
Float needle valve | - | X | |
Float needle valve seat | - | X | |
Float needle valve seat gasket | - | X | |
Float with lever (comp.) | - | X | |
Float hanger | - | X | |
Fast idle rod | - | X | |
Fast idle rod cotter pin | - | X | |
Fast idle adj. lever | - | X | |
Fast idle adj . lever screw | - | X | |
Fast idle adj. lever screw locknut | - | X | |
Fast idle adj. lever stem nut | - | X | |
Fast idle adj. lever stem nut lockwasher | - | X | |
Fast idle adj. lever | - | X | |
Fast idle adj. lever fulcrum screw | - | X | |
Fast idle adj. lever fulcrum screw washer | - | X | |
Idle air bleed | - | X | |
Idle air bleed channel plug | - | X | |
Idle channel screw plug | - | X | |
Idle channel screw plug | - | X | |
Idle needle valve | - | X | |
Idle needle valve spring | - | X | |
Idle tube | - | X | |
Main body | - | X | |
Main body attaching screw | - | X | |
Main body attaching screw lockwasher | - | X | |
Main body gasket | - | X | |
Main discharge Jet | - | X | |
Main discharge Jet plug | - | X | |
Main discharge jet plug gasket | - | X | |
Main metering Jet | - | X | |
Pump check valve (comp.) | - | X | |
Pump check valve channel plug | - | X | |
Pump discharge nozzle | - | X | |
Pump discharge nozzle channel plug | - | X | |
Pump discharge nozzle channel plug (external) | - | X | |
Pump lever (comp.) | - | X | |
Pump lever stop screw | - | X | |
Pump lever spring | - | X | |
Pump lever fulcrum screw | - | X | |
Pump lever fulcrum screw spring washer | - | X | |
Pump lever fulcrum screw lock screw | - | X | |
Pump lever fulcrum screw lock screw washer | - | X | |
Pump piston and link (comp.) | - | X | |
Pump piston spring | - | X | |
Pump and link spring | - | X | |
Pump and link spring cotter pin | - | X | |
Pump and link spring washer | - | X | |
Pump and link felt washer | - | X | |
Pump piston and link washer | - | X | |
Pump piston link cotter pin | - | X | |
Pump rod | - | X | |
Pump rod cotter pin | - | X | |
Pump rod washer | - | X | |
Pump housing | - | X | |
Pump housing attaching screw | - | X | |
Pump housing attaching screw lockwasher | - | X | |
Throttle lever and stem (comp.) | - | X | |
Throttle stop screw | - | X | |
Throttle stop screw spring | - | X | |
Throttle valve | - | X | |
Throttle valve screw | - | X | |
Throttle valve screw lockwasher | - | X | |
Throttle valve body | - | X | |
Fast idle bell crank lever | - | X | |
Fast idle bell crank lever bushing N0TE:-When ordering venturi tubes, high speed bleeders metering jets, pump discharge. Jets, or by-pass Jets specify the size number which is found stamped on each part, and always state type of carburetor and serial number as well as model and make of car for which part Is Intended | - | X | |
Float chamber vent cap attaching screw | - | X | |
Choke valve (Comp.) | - | X | |
Choke valve screws | - | X | |
Air horn attaching screw | - | X | |
Air horn attaching screw lockwasher | - | X | |
Air horn attaching screw | - | X | |
Air horn attaching stud | - | X | |
Air horn attaching stud nut | - | X | |
Air horn attaching stud nut lockwasher | - | X | |
Air horn gasket | - | X | |
Economizer by-pass jet | - | X | |
Float chamber cover screws | - | X | |
Float chamber cover screws lockwasher | - | X | |
Float fulcrum screw | - | X | |
Float fulcrum screw gasket | - | X | |
Float needle valve | - | X | |
Float needle valve seat | - | X | |
Float needle valve seat gasket | - | X | |
Float with lever (Comp.) | - | X | |
Float hanger | - | X | |
Fast idle rod | - | X | |
Fast idle rod cotter pin | - | X | |
Fast idle adj. lever | - | X | |
Fast idle adj. lever screw | - | X | |
Fast idle adj. lever screw locknut | - | X | |
Fast idle adj. lever stem nut | - | X | |
Fast idle adj. lever stem nut lockwasher | - | X | |
Fast Idle adj. lever | - | X | |
Fast idle adj. lever fulcrum screw | - | X | |
Fast idle adj. lever fulcrum screw washer | - | X | |
Idle air bleed | - | X | |
Idle air bleed channel plug | - | X | |
Idle channel screw plug | - | X | |
Idle channel screw plug | - | X | |
Idle needle valve | - | X | |
Idle needle valve spring | - | X | |
Idle tube | - | X | |
Main body | - | X | |
Main body attaching screws | - | X | |
Main body attaching screw lockwashers | - | X | |
Main body gasket | - | X | |
Main discharge Jet | - | X | |
Main discharge Jet plug | - | X | |
Main discharge Jet plug gasket | - | X | |
Main metering jet | - | X | |
Pump check valve (Comp.) | - | X | |
Pump check valve channel plug | - | X | |
Pump discharge nozzle | - | X | |
Pump discharge nozzle channel plug | - | X | |
Pump discharge nozzle channel plug (external | - | X | |
Pump lever (Comp.) | - | X | |
Pump lever stop screw | - | X | |
Pump lever spring | - | X | |
Pump lever fulcrum screw | - | X | |
Pump lever fulcrum screw spring washer | - | X | |
Pump lever fulcrum screw lock screw | - | X | |
Pump lever fulcrum screw lock screw washer | - | X | |
Pump piston and link (Comp.) | - | X | |
Pump piston spring | - | X | |
Pump and link | - | X | |
Pump and link | - | X | |
Pump and#l' tnjt spring washer | - | X | |
Pump and link- felt washer | - | X | |
Pump platen jmtA link washer | - | X | |
Pump pist< | - | X | |
Pump rod | - | X | |
Pump rod cotter pin | - | X | |
Pump rod washer | - | X | |
Pump housing | - | X | |
Pump housing attaching screw | - | X | |
Pump housing attaching screw lockwasher | - | X | |
Throttle lever and stem (Comp.) | - | X | |
Throttle stop | - | X | |
Throttle stop | - | X | |
Throttle stop | - | X | |
Throttle valve | - | X | |
Throttle valve screw | - | X | |
Throttle valve screw lockwasher | - | X | |
Throttle valve | - | X | |
Fast idle bell crank lever | - | X | |
Fast idle bell crank lever MOTOR CLUTCH SHAFT BEARING | - | X | |
FUEL - MOTOR FUEL PUMP | |||
| Part Number | Part Description | Application / Note | QTY |
valve | - | X | |
Upper diaphragm plate | - | X | |
Cork gasket (Air dome) | - | X | |
Spring (Discharge; | - | X | |
Snap ring | - | X | |
Washer (Valve nut) | - | X | |
9? Stop pin and bridge assembly | - | X | |
Glass bowl | - | X | |
Diaphragm (4-62862 and Envelope - Service only) | - | X | |
Spring (lever) | - | X | |
Body | - | X | |
Cover lockwasher | - | X | |
Cover and valve bushing assembly | - | X | |
Chin strap assembly | - | X | |
Cover screw | - | X | |
Air dome | - | X | |
Valve nut | - | X | |
Inlet valve spring | - | X | |
Plunger | - | X | |
Lower diaphragm plate | - | X | |
Lever | - | X | |
4 Glass bowl | - | X | |
Bowl gasket | - | X | |
9 Screen | - | X | |
5 Cowl seat | - | X | |
3 Ball nut | - | X | |
6 Bail and screw | - | X | |
1 Valve plug | - | X | |
2 Valve plug gasket | - | X | |
Valve spring | - | X | |
Valve | - | X | |
Air dome | - | X | |
Combination pump | - | X | |
Air dome | - | X | |
Body | - | X | |
Top cover and valve seat assembly | - | X | |
Rocker arm | - | X | |
Rocker arm pin | - | X | |
Rocker arm washer | - | X | |
Oil seal gasket | - | X | |
Oil seal gasket retainer | - | X | |
Top cover screw | - | X | |
Top cover screw lockwasher 906 1006 1108 1208 1408 | - | X | |
Link | - | X | |
Valve plug | - | X | |
Valve | - | X | |
Valve spring | - | X | |
Glass bowl | - | X | |
Bowl gasket | - | X | |
Screen | - | X | |
9 Ball assembly | - | X | |
7 Bowl seat | - | X | |
8 Thumb nut | - | X | |
Diaphragm (5 pieces 855275) | - | X | |
9 Pull rod | - | X | |
9 Pull rod nut | - | X | |
Upper diaphragm protector | - | X | |
0 Lower diaphragm protector | - | X | |
Diaphragm alignment washer | - | X | |
Pull rod lockwasher | - | X | |
Pull rod gasket | - | X | |
7 Rocker arm spring | - | X | |
1 Diaphragm spring | - | X | |
0 Body | - | X | |
Body screw | - | X | |
Body screw lockwasher | - | X | |
Diaphragm (5 pieces 856218) | - | X | |
Diaphragm spring | - | X | |
Upper diaphragm protector | - | X | |
Lower diaphragm protector | - | X | |
6 Diaphragm alignment washer | - | X | |
7 Gasket | - | X | |
1 Pull rod | - | X | |
9 Pull rod nut | - | X | |
Pull rod nut lockwasher | - | X | |
Pull rod gasket | - | X | |
Bottom cover | - | X | |
Bottom cover screw | - | X | |
Bottom cover gasket | - | X | |
Valve | - | X | |
Valve stop plate | - | X | |
Valve spring | - | X | |
Valve retainer | - | X | |
Valve retainer gasket | - | X | |
Screen | - | X | |
Valve retainer screw | - | X | |
7 Link MOTOR GEAR COVER | - | X | |
FUEL - GASOLINE | |||
| Part Number | Part Description | Application / Note | QTY |
Gasoline tank assembly | (Use with body 275) | X | |
Gasoline tank assembly | (Use with body 3188) | X | |
Gasoline tank to frame rear channel bracket spacer | (Use with body 275) | X | |
Gasoline tank to frame rear Intermediate channel bracket-lower | (Use with body 275) | X | |
Gasoline tank to frame rear intermediate channel bracket-upper | (Use with body 275) | X | |
Gasoline tank to frame rear channel bracket- lower | (Use with body 275) | X | |
Gasoline tank to frame rear channel bracket- upper | (Use with body 275) | X | |
Gasoline tank to frame rear Intermediate channel bracket spacer | (Use with body 275) | X | |
Gasoline tank Inlet bushing | (Use with body 275) | X | |
Gasoline tank Inlet cap assembly-right | (Use with body 275) | X | |
Gasoline tank Inlet cap assembly-left | (Use with body 276) * For Items not listed herein see Instructions on Page 2 | X | |
Gasoline tank Inlet cap assembly-right screw W -S #10-52 x 1-1/8" fll). hd. | (Use with body 875) | X | |
Lockwasher #10 | (Use with body 275) | X | |
Gasoline tank inlet cap emblem | (Use with body 27B) | X | |
Gasoline tank inlet cap emblem retaining nut | (Use with body 275) | X | |
Gasoline tank Inlet cap locking plate assembly | (Use with body 275) | X | |
Screw #10-32 x 3/8" flat hd. | (Use with body 275) | X | |
Gasoline tank Inlet cap-right spacer | (Use with body 275) | X | |
Gasoline tank Inlet flange-right | (Use with body 275) | X | |
Gasoline tank Inlet flange-left | (Use with body 275) | X | |
Screw #10-32 x 11/32" fill. hd. | (Use with body 275) | X | |
Lockwasher #10 | (Use with body 275) | X | |
Gasoline tank Inlet flange gasket | (Use with body 275) | X | |
Gasoline tank Inlet tube assembly | (Use with body 280) | X | |
Gasoline tank support bracket reinforcement-front | (Use with body 275) | X | |
Gasoline tube outer assembly | - | X | |
