Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
1948-1954 - GROUP 9 - FUEL
9.100 - CARBURETOR - CARBURETOR CHANGEOVER KIT | |||
Part Number | Application | Note | QTY |
5401-11 | 2 BARREL TO 4 BARREL | 1 | |
2611-13 | 2 BARREL TO 4 BARREL | 1 | |
2401; 2501 | WITH 300 ENG, 2 BARREL TO 4 BARREL | 1 | |
2401 (BODIES 2467-69) | 2 BARREL TO 4 BARREL | 1 | |
2402-06-13; 2502-06-13-31 | 2 BARREL TO 4 BARREL | 1 | |
9.1001 - CARBURETOR - CARBURETOR ASSEMBLY | |||
Part Number | Application | Note | QTY |
2201-02-11-22-32; 2301-02-32; ALL 24TH; 25TH; 26TH; 54TH | STUD 5/16, TO MANIFOLD | 4 | |
2206-13-26-33; 2306-13-33 | STUD 5/16, TO MANIFOLD | 2 | |
2220-40 | STUD 3/8, TO MANIFOLD | 2 | |
2206-13-26-33; 2306-13-33 | STUD 3/8, LONG, TO MANIFOLD | 2 | |
2220-40 | - | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2201-11 | - | 1 | |
2301 | CARTER NO. WDO-644-SA | 1 | |
2202-22-32; 2302-32 | - | 1 | |
2301 | CARTER NO. WGD-728-S OR WGD-728-SA | 1 | |
2401 (BODIES 2467-69) | CARTER NO. WGD-767-S | 1 | |
2401 | CARTER NO. WGD-767-S, WITH 300 ENG | 1 | |
2402-06-13 | CARTER NO. WGD-767-S | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501; 2601-33 | CARTER NO. WGD-784-S | 1 | |
2502-06-13-31; 2611-13 | CARTER NO. WGD-928-S, 2 BARREL | 1 | |
2501 | CARTER NO. WGD-928-S WITH 300 ENG | 1 | |
5400-33 | CARTER NO. WGD-986-S | 1 | |
5401-02-11 | CARTER NO. WCFB-2103-S, 4 BARREL | 1 | |
5401-11 | CARTER NO. WGD-2102-S, 2 BARREL | 1 | |
2602-06-13-26-31 | CARTER NO. WCFB-2084-S, 4 BARREL (SUPERSEDES 446175, CARTER NO. WCFB-985-S) | 1 | |
5406-13-26-31 | CARTER NO. WCFB-2112-S | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | LOCKWASHER 5/16 | 4 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | NUT 5/16-24, STUD | 4 | |
2220-40 | NUT 3/8-24, STUD | 2 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 5400-01-11-33 | CONNECTOR, INLET, USE WITH 2 BARREL CARBURETOR | 1 | |
ALL 26TH; 54TH | CONNECTOR, INLET, TO GAS FILTER | 1 | |
9.1002 - CARBURETOR - REPAIR KIT | |||
Part Number | Application | Note | QTY |
2220-40 | - | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2202-22-32; 2302-32 | - | 1 | |
2201-11 | - | 1 | |
2301 | USED WITH WDO-644-SA CARBURETOR | 1 | |
2301 | USED WITH WGD-728-S CARBURETOR | 1 | |
2301 | USED WITH WGD-728-SA CARBURETOR | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501; 2601-33 | - | 1 | |
2401 (BODIES 2467-69) | - | 1 | |
2401 | WITH 300 ENGINE | 1 | |
2402-06-13 | - | 1 | |
2501 | WITH 300 ENGINE | 1 | |
2502-06-13-31; 2611-13 | USE WITH 2 BARREL CARBURETOR | 1 | |
2602-06-13-26-31 | USE WITH 4 BARREL CARBURETOR | 1 | |
9.101 - CARBURETOR - GASKET SET | |||
Part Number | Application | Note | QTY |
2220-40 | - | 1 | |
2201-02-06-11-13-22-26-32-33; 2302-06-13-32-33 | - | 1 | |
2301 | USED WITH WDO TYPE CARBURETOR | 1 | |
2301 | USED WITH WGD TYPE CARBURETOR | 1 | |
ALL 24TH; 25TH; 2601-11-13-33; 5400-01-11-33 | USE WITH 2 BARREL CARBURETOR | 1 | |
2602-06-13-26-31 | USE WITH 4 BARREL CARBURETOR | 1 | |
5401-02-06-11-13-26-31 | USE WITH 4 BARREL CARBURETOR | 1 | |
9.1015 - CARBURETOR - GASKET-CARBURETOR TO MANIFOLD | |||
Part Number | Application | Note | QTY |
2201-02-06-11-13-26-32-33; ALL 23RD; 24TH; 25TH; 2601-11-13-33; 5400-01-11-33 | USE WITH 2 BARREL CARBURETOR | 2 | |
2220-40 | - | 2 | |
2602-06-13-26-31; 5401-02-06-11-13-26-31 | USE WITH 4 BARREL CARBURETOR | 2 | |
9.102 - CARBURETOR - AIR CLEANER ASSEMBLY | |||
Part Number | Application | Note | QTY |
2201-02-11-20-22-32-40; 2301 | GROMMET, TO BRACE | 1 | |
2201-02-11-20-22-32-40; 2301 | INSULATION | 1 | |
2201-02-11-20-22-32-40; 2301 | SPACER | 1 | |
2206-13-26-33; 2306-13-33 | OIL BATH | 1 | |
2202-22-32 | - | 1 | |
2220-40(BODIES 2280-86) | - | 1 | |
2240 | OIL BATH | 1 | |
2201-11; 2301 | - | 1 | |
2201-02-11-22-32; 2301-02-32 | OIL BATH | 1 | |
2201-02-11-20-22-32-40; 2301 | WASHER 5/16, BRACE SCREW | 1 | |
2401 (BODIES 2467-69) | OIL BATH | 1 | |
2401 | OIL BATH, WITH 300 ENGINE | 1 | |
2402-06-13 | OIL BATH | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501; 2601-11-13-33; 5400-01-11-33 | USE WITH 2 BARREL CARBURETOR | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501; 2601-33; 5400-01-33 | OIL BATH, INCLUDES SUPPORT BRACKET, USE WITH 2 BARREL CARBURETOR | 1 | |
2501 | OIL BATH, WITH 300 ENGINE | 1 | |
2502-06-13-31; 2611-13; 5411 | OIL BATH, USE WITH 2 BARREL CARB | 1 | |
2401; 2501-02-06-13-31; 2601-11-13-33; 5400-01-11-33 | CLAMP SCREW | 1 | |
2602-06-13-26-31; 5401-02-11 | STUD 1/4-20 X 6-7/8, HOLD DOWN, USE WITH 4 BARREL CARBURETOR | 1 | |
2602-06-13-26-31; 5401-02-11 | OIL BATH, USE WITH 4 BARREL CARB | 1 | |
5406-13-26-31 | - | 1 | |
5406-13-26-31 | STUD 1/4-20 X 7-3/4, HOLD DOWN | 1 | |
5402 | INSULATOR, HOLD DOWN STUD | 1 | |
2201-02-11-20-22-32-40; 2301 | SCREW 5/16-18 X 7/8, CYL HD BRACE | 1 | |
5406-13-26-31 | NUT 1/2-20, STUD, LOCK | 1 | |
2602-06-13-26-31; 5401-02-11 | WING NUT 1/4-20, USE WITH 4 BARREL CARBURETOR | 1 | |
5406-13-26-31 | WING NUT 1/4-20 | 2 | |
9.1034 - CARBURETOR - BRACE-AIR CLEANER | |||
Part Number | Application | Note | QTY |
2220-40 (BODIES 2280-86) | - | 1 | |
2201-02-11-22-32 | - | 1 | |
2301 | USED WITH WDO TYPE CARBURETOR | 1 | |
2220-40 | OIL BATH | 1 | |
2301 | USED WITH WGD TYPE CARBURETOR | 1 | |
9.10343 - CARBURETOR - GASKET-AIR CLEANER & SILENCER ASSEMBLY | |||
Part Number | Application | Note | QTY |
2602-06-26-31; 5402-06-13-26-31 | - | 2 | |
2613; 5401-11 | USE WITH 4 BARREL CARBURETOR | 2 | |
9.1035 - CARBURETOR - BRACKET-AIR CLEANER AND SILENCER SUPPORT | |||
Part Number | Application | Note | QTY |
2206-13-26-33; 2306-13-33 | - | 1 | |
2202-22-32 | - | 1 | |
2201-02-11-22-32; 2301-02-32 | USED WITH OIL BATH CLEANER | 1 | |
ALL 24TH; 2501; 2601-02-06-13-26-31-33; 5401-02-06-11-13-26-31 | LOCKWASHER, TO CYL HEAD SCREW, USE WITH 4 BARREL CARBURETOR | 1 | |
ALL 24TH; 2501; 2601-33 | - | 1 | |
5406-13-26-31 | WASHER 3/8, RUBBER; TO CLEANER SCREW | 2 | |
5406-13-26-31 | SPACER, TO AIR CLEANER SCREW | 1 | |
2602-06-26-31; 5402 | - | 1 | |
2613; 5401-11 | USE WITH 4 BARREL CARBURETOR | 1 | |
5406-13-26-31 | - | 1 | |
5406-13-26-31 | SCREW 5/16-18 X 3/4, TO CLEANER | 1 | |
ALL 22ND; 23RD | SCREW 3/8-16 X 1, TO CYL HEAD | 1 | |
ALL 22ND; 23RD | LOCKWASHER 3/8 | 1 | |
ALL 22ND; 23RD | WASHER 3/8 | 1 | |
ALL 24TH; 2501; 2601-02-06-13-26-31-33; 5401-02-06-11-13-26-31 | SCREW 3/8-16 X 3/4, TO CYL HEAD, USE WITH 4 BARREL CARBURETOR | 1 | |
5406-13-26-31 | WASHER 3/8, STEEL, TO AIR CLEANER SCREW | 1 | |
9.1036 - CARBURETOR - INSULATOR-AIR CLEANER & SILENCER SUPPORT BRACKET | |||
Part Number | Application | Note | QTY |
5406-13-26-31 | - | 1 | |
9.109 - CARBURETOR - TUBE ASSEMBLY-AUTOMATIC CHOKE | |||
Part Number | Application | Note | QTY |
2220-40 | - | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2201-02-11-22-32; 2302-32 | - | 1 | |
2301 | USED WITH WDO TYPE CARBURETOR | 1 | |
2301 | USED WITH WGD TYPE CARBURETOR | 1 | |
ALL 24TH; 25TH | - | 1 | |
2601-11-13-33; 5400-01-11-33 | USE WITH 2 BARREL CARBURETOR | 1 | |
2602-06-13-26-31; 5401-02-06-11-13-26-31 | USE WITH 4 BARREL CARBURETOR | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 2601-11-13-33; 5400-01-11-33 | UNION NUT, USE WITH 2 BARREL CARB | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 2601-11-13-33; 5400-01-11-33 | UNION SLEEVE, USE WITH 2 BARREL CARBURETOR | 1 | |
9.110 - CARBURETOR - FILTER ASSEMBLY-GASOLINE | |||
Part Number | Application | Note | QTY |
ALL 26TH; 54TH | CONNECTOR 5/16 | 1 | |
ALL 26TH; 54TH | - | 1 | |
9.1115 - CARBURETOR - SHIELD ASSEMBLY-HEAT | |||
Part Number | Application | Note | QTY |
2206-13-26-33; 2306-13-33 | - | 1 | |
5406-13-26-31 | - | 1 | |
9.113 - CARBURETOR - INSULATOR-CARBURETOR | |||
Part Number | Application | Note | QTY |
2201-02-06-11-13-22-26-32-33; ALL 23RD; 24TH; 25TH; 2601-11-13-33; 5400-01-11-33 | USE WITH 2 BARREL CARBURETOR | 1 | |
2602-06-13-26-31; 5401-02-06-11-13-26-31 | USE WITH 4 BARREL CARBURETOR | 1 | |
9.11355 - CARBURETOR CONTROL - PEDAL-ACCELERATOR | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH | - | 1 | |
2601-11-13-33; 5400-01-11-13-33 | - | 1 | |
2602-06-26-31; 5402-06-26-31 | - | 1 | |
9.11356 - CARBURETOR CONTROL - BRACKET-ACCELERATOR PEDAL HINGE | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | LOCKWASHER 1/4 | 2 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | NUT 1/4-28 | 2 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | SCREW 1/4-28 X 1/2 | 2 | |
9.11357 - CARBURETOR CONTROL - PIN-ACCELERATOR PEDAL HINGE | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH | - | 1 | |
ALL 26TH; 54TH | - | 1 | |
9.11358 - CARBURETOR CONTROL - RETAINING RING-ACCELERATOR PEDAL HINGE PIN | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH | - | 1 | |
9.11359 - CARBURETOR CONTROL - ROD-ACCELERATOR PEDAL PUSH | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | SPRING WASHER 1/4 | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 1 | |
ALL 54TH | ULTRAMATIC, GEAR START TYPE | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | COTTER PIN 1/16 X 1/2 | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | WASHER 1/4 | 1 | |
9.11361 - CARBURETOR CONTROL - LEVER-ACCELERATOR PEDAL PUSH ROD | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | PIN, TO SHAFT | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | - | 1 | |
9.11362 - CARBURETOR CONTROL - BRACKET-ACCELERATOR PEDAL PUSH ROD LEVER | |||
Part Number | Application | Note | QTY |
RHD, 2240 | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | SCREW 1/4-28 X 9/16 | 2 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | LOCKWASHER 1/4 | 2 | |
9.113623 - CARBURETOR CONTROL - STOP ASSY-ACC PEDAL PUSH ROD LEVER BRACKET KICK DOWN SPG | |||
Part Number | Application | Note | QTY |
ALL 23RD; 24TH; 25TH | NUT | 1 | |
ALL 23RD; 24TH; 25TH | ULTRAMATIC | 1 | |
9.11363 - CARBURETOR CONTROL - PIN-ACC PEDAL PUSH ROD LEVER | |||
Part Number | Application | Note | QTY |
ALL 22TH; 23RD | SPRING WASHER 1/4 | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | - | 1 | |
RHD, 2240 | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | WASHER | 2 | |
ALL 22ND; 23RD | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | COTTER PIN 1/16 X 1/2 | 1 | |
9.11364 - CARBURETOR CONTROL - ROD-ACC PEDAL PUSH ROD LEVER TO RELAY LEVER | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | CLEVIS CLIP | 1 | |
ALL 22ND; 23RD | NUT #10-32, ROD SHORT, OVERDRIVE | 1 | |
ALL 22ND; 23RD | SHORT, OVERDRIVE | 1 | |
ALL 22ND; 23RD | LONG, OVERDRIVE | 1 | |
ALL 22ND; 23RD | - | 1 | |
2206-13-26-33; 2313 | ELECTROMATIC CLUTCH AND OVERDRIVE | 1 | |
RHD, 2201-02-11-22-32; 2301 | - | 1 | |
2201-02-11-13-22-32; 2301-02-32 | ELCTROMATIC CLUTCH | 1 | |
RHD, 2201-02-11-22-32; 2301-02 | lONG, OVERDRIVE | 1 | |
RHD, 2240 | - | 1 | |
ALL 22ND; 23RD | WASHER 3/16 | 1 | |
ALL 22ND; 23RD | COTTER PIN 1/16 X 1/2 | 1 | |
9.11365 - CARBURETOR CONTROL - SHAFT-ACCELERATOR PEDAL PUSH ROD LEVER | |||
Part Number | Application | Note | QTY |
RHD, 2401; 2501; 2601-11; 5400-01-11 | SPRING WASHER 1/4 | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | WASHER 1/4 | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | - | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | COTTER PIN 1/16 X 1/2 | 1 | |
9.113652 - CARBURETOR CONTROL - ROD-PUSH ROD LEVER SHAFT TO CARB TO OPER SHAFT LEVER | |||
Part Number | Application | Note | QTY |
RHD, 2401; 2501; 2601-11; 5400-01-11 | CLEVIS CLIP | 2 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | NUT #10-32, LH THREAD | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | TURNBUCKLE | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | SHORT | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | LONG | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | NUT #10-32 | 1 | |
9.113653 - CARBURETOR CONTROL - ROD-ACC PEDAL PUSH ROD LEVER TO CARB THROTTLE OPER SHAFT | |||
Part Number | Application | Note | QTY |
ALL 24TH; 25TH; 26TH; 54TH | CLEVIS CLIP | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | NUT #10-32, LH THREAD, ULTRAMATIC | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | TURNBUCKLE, ULTRAMATIC | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | SHORT, ULTRAMATIC | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | WASHER 13/64 | 1 | |
ALL 24TH; 25TH; 2601-02-11-13-26-31-33; 5400-01-02-11-13-26-33 | - | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | LONG, ULTRAMATIC | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | COTTER PIN 1/16 X 1/2 | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | NUT #10-32, RH THREAD, ULTRAMATIC | 1 | |
9.11366 - CARBURETOR CONTROL - SPRING-ACCELERATOR PEDAL RETRACTING | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | - | 1 | |
9.113663 - CARBURETOR CONTROL - BRACKET-ACCELERATOR PEDAL RETRACTING SPRING | |||
Part Number | Application | Note | QTY |
ALL 23RD | - | 1 | |
9.11367 - CARBURETOR CONTROL - WEATHER SEAL-ACCELERATOR PUSH ROD | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 1 | |
9.11368 - CARBURETOR CONTROL - ROD-ACCELERATOR RELAY LEVER TO CARB THROTTLE BELL CRANK | |||
Part Number | Application | Note | QTY |
2220-40 | CLEVIS CLIP, LEFT | 1 | |
2220-40 | CLEVIS CLIP, RIGHT | 1 | |
2220-40 | NUT #10-32, LH THREAD | 1 | |
RHD, 2240 | SHORT | 1 | |
2220-40 | TURNBUCKLE | 1 | |
2220-40 | SHORT | 1 | |
2220-40 | LONG | 1 | |
RHD, 2240 | LONG | 1 | |
RHD, 2240 | WASHER 3/16 | 1 | |
RHD, 2240 | COTTER PIN 1/16 X 1/2 | 1 | |
2220-40 | NUT #10-32 | 1 | |
9.113681 - CARBURETOR CONTROL - ROD-ACCELERATOR RELAY LEVER TO CARBURETOR | |||
Part Number | Application | Note | QTY |
RHD, 2201-02-11-22-32; 2301 | SPRING WASHER, CARBURETOR END | 1 | |
RHD, 2201-02-11-22-32; 2301 | CLEVIS CLIP, RELAY END | 1 | |
RHD, 2201-02-11-22-32; 2301 | NUT #10-32, LH THREAD | 1 | |
RHD, 2201-02-11-22-32; 2301 | TURNBUCKLE | 1 | |
RHD, 2201-02-11-22-32; 2301 | SHORT | 1 | |
RHD, 2201-02-11-22-32 | LONG | 1 | |
RHD, 2301 | LONG, USED WITH WDO TYPE CARBURETOR | 1 | |
RHD, 2201-02-11-22-32; 2301 | WASHER 3/16, CARBURETOR END | 1 | |
RHD, 2301 | LONG, USED WITH WGD TYPE CARBURETOR | 1 | |
RHD, 2201-02-11-22-32; 2301 | NUT #10-32 | 1 | |
RHD, 2201-02-11-22-32; 2301 | COTTER PIN 1/16 X 7/16, CARB END | 1 | |
9.11371 - CARBURETOR CONTROL - ROD-ACC RELAY LEVER TO CARB THROTTLE OPERATING LEVER | |||
Part Number | Application | Note | QTY |
2201-02-06-11-22-26-32-33; ALL 23RD | CLEVIS CLIP | 2 | |
ALL 22ND; 23RD | CLEVIS CLIP, ELECTROMATIC CL WITH OVERDRIVE | 1 | |
2306-33 | CLEVIS CLIP | 1 | |
ALL 22ND; 23RD | NUT #10-32, LH THREAD | 1 | |
2201-02-06-11-22-26-32-33; ALL 23RD | TURNBUCKLE | 1 | |
2201-02-06-11-13-22-26-32-33; ALL 23RD | SHORT | 1 | |
ALL 22ND; 23RD | ROD END, ADJUSTING, ELECTROMATIC CLUTCH WITH OVERDRIVE | 1 | |
2206-13-26-33; 2313 | ELECTROMATIC CL WITH OVERDRIVE | 1 | |
ALL 22ND; 23RD | PIN, ROD END ADJUSTING | 1 | |
2201-02-11-22-32; 2301-02-32 | ELECTROMATIC CL WITH OVERDRIVE | 1 | |
2206-13-26-33; 2313 | LONG | 1 | |
2201-02-11-22-32; 2301-02-32 | LONG | 1 | |
2306-33 | LONG | 1 | |
2301-02-32 | LONG, ULTRAMATIC | 1 | |
ALL 22ND; 23RD | COTTER PIN 1/16 X 1/2 | 1 | |
ALL 22ND; 23RD | NUT #10-32, RH THREAD | 1 | |
9.11372 - CARBURETOR CONTROL - SHAFT AND BRACKET ASSY-ACCELERATOR RELAY LEVERS | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | - | 1 | |
2201-02-11-13-22-32; 2301-02-32 | ELECTROMATIC CLUTCH | 1 | |
RHD, 2201-02-11-22-32; 2301 | - | 1 | |
2226 | - | 1 | |
RHD, 2240 | - | 1 | |
ALL 22ND; 23RD | SCREW 1/4-20 X 1/2 | 2 | |
ALL 22ND; 23RD | LOCKWASHER 1/4 | 2 | |
9.113721 - CARBURETOR CONTROL - SPRING-ACC RELAY LEVER SHAFT ACC PEDAL RETURN | |||
Part Number | Application | Note | QTY |
2206-13-26-33; 2313 | ELECTROMATIC CLUTCH | 1 | |
2201-02-11-22-32; 2301-02-32 | ELECTROMATIC CLUTCH | 1 | |
9.11373 - CARBURETOR CONTROL - BRACKET ASSY-ACC RELAY LEVER SHAFT | |||
Part Number | Application | Note | QTY |
RHD, 2240 | - | 2 | |
9.11374 - CARBURETOR CONTROL - T HANDLE, BRACKET AND CABLE ASSY-THROTTLE CONTROL | |||
Part Number | Application | Note | QTY |
2226 | - | 1 | |
2226 | LOCKWASHER #10 | 2 | |
2226 | NUT #10-24 | 2 | |
2226 | SCREW #10-24 X 1/2 | 2 | |
9.11375 - CARBURETOR CONTROL - BRACKET-THROTTLE CONTROL CABLE ANCHOR | |||
Part Number | Application | Note | QTY |
2226 | - | 1 | |
2226 | LOCKWASHER #10, CLAMPING SCREW | 1 | |
2226 | NUT #10-32, CLAMPING SCREW | 1 | |
2226 | SCREW #10-32 x 5/8, CLAMPING | 1 | |
2226 | SCREW #10 x 1/2, TO DASH | 2 | |
9.11376 - CARBURETOR CONTROL - BLOCK-THROTTLE CONTROL CABLE STOP | |||
Part Number | Application | Note | QTY |
2226 | - | 1 | |
2226 | SCREW #4-40 X 3/8 | 1 | |
9.135 - CARBURETOR CONTROL - ROD-CARBURETOR THROTTLE OPERATING | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | SPRING WASHER #10 | 2 | |
ALL 22ND; 23RD | YOKE END, ELECTROMATIC CLUTCH | 1 | |
2220-40 | CLEVIS CLIP, BELL CRANK END | 1 | |
2201-02-06-11-13-22-26-32-33; 2301-02-13-32 | CLEVIS CLIP, OPERATING SHAFT END | 1 | |
2220-40 | CLEVIS CLIP, CARBURETOR END | 1 | |
2401-02-13; ALL 25TH; 26TH; 54TH | CLEVIS CLIP, CROSS SHAFT END | 1 | |
2220-40; 2401-02-13; 2501-02-13-31; 2601-02-11-13-26-31-33; 5400-01-02-11-13-26-33 | NUT #10-32, LH THREAD | 1 | |
2220-40; 2401-02-13; 2501-02-13-31; 2601-02-11-13-26-31-33; 5400-01-02-11-13-26-33 | TURNBUCKLE | 1 | |
2220-40 | LONG | 1 | |
2220-40 | SHORT | 1 | |
2401-02-13; 2501-02-13-31; 2601-11-13-33 | SHORT, USE WITH 2 BARREL CARB | 1 | |
5400-01-11-33 | SHORT, USE WITH 2 BARREL CARBURETOR | 1 | |
RHD, 2240 | - | 1 | |
2201-02-11-22-32 | ELECTROMATIC CLUTCH | 1 | |
2301-02-32 | ELECTROMATIC CLUTCH, WITH WDO CARB | 1 | |
2206-13-26-33; 2313 | - | 1 | |
2201-02-11-22-32 | - | 1 | |
2301-02-32 | WITH WDO CARB | 1 | |
2206-13-26-33; 2313 | ELECTROMATIC | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | WASHER 3/16 | 2 | |
2301 | WITH WGD CARB | 1 | |
2301 | ELECTROMATIC CLUTCH, WITH WGD CARB | 1 | |
2306-33 | - | 1 | |
2301-02-32 | ULTRAMATIC | 1 | |
2401-02-13; 2501-02-13-31; 2601-11-13-33 | LONG, USE WITH 2 BARREL CARBURETOR | 1 | |
5400-01-11-33 | LONG, USE WITH 2 BARREL CARBURET0R | 1 | |
ALL 24TH; 25TH | ULTRAMATIC | 1 | |
2401-02-13; 2501-02-13-31; 2601-11-13-33 | OVERDRIVE, USE WITH 2 BARREL CARB | 1 | |
5400-01-11-33 | OVERDRIVE, USE WITH 2 BARREL CARB | 1 | |
2602-06-13-26-31 | ULTRAMATIC AND 0.D., USE WITH 4 BARREL CARB | 1 | |
2602-13-26-31 | SHORT, USE WITH 4 BARREL CARBURETOR | 1 | |
5401-02-11-13-26 | SHORT, USE WITH 4 BARREL CARBURETOR | 1 | |
2602-13-26-31 | LONG, USE WITH 4 BARREL CARBURETOR | 1 | |
5401-02-11-13-26 | LONG, USE WITH 4 BARREL CARBURETOR | 1 | |
2601-11-13-33 | ULTRAMATIC, USE WITH 2 BARREL CARB | 1 | |
5400-01-11-33 | ULTRAMATIC, USE WITH 2 BARREL CARB, NOT USED WITH GEAR START TYPE | 1 | |
5401-02-06-11-13-26-31 | ULTRAMATIC AND O.D., USE WITH 4 BARREL CARBURETOR | 1 | |
5400-01-11-33 | ULTRAMATIC, GEAR START TYPE | 1 | |
ALL 22ND; 2301-02-13-32; 2401-02-13; 2501-02-13-31; 2601-02-11-13-26-31-33; ALL 54TH | NUT #10-32, YOKE END LOCK | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | COTTER PIN 1/16 X 7/16 | 2 | |
2201-02-06-11-13-22-26-32-33; 2301-02-13-32 | PIN 3/16, YOKE END | 1 | |
9.136 - CARBURETOR CONTROL - BELL CRANK-CARBURETOR THROTTLE OPERATING | |||
Part Number | Application | Note | QTY |
2220-40 | SPRING WASHER, LOWER BELL CRANK | 1 | |
RHD, 2240 | INTAKE MANIFOLD | 1 | |
2220-40 | UPPER | 1 | |
2220-40 | LOWER | 1 | |
2220-40 | PIN, UPPER BELL CRANK | 1 | |
2220-40 | COTTER PIN 1/16 X 1/2 | 2 | |
2220-40 | WASHER 1/4, LOWER BELL CRANK | 1 | |
9.1361 - CARBURETOR CONTROL - SHAFT-CARBURETOR THROTTLE OPERATING BELL CRANK | |||
Part Number | Application | Note | QTY |
RHD, 2240 | - | 1 | |
RHD, 2240 | COTTER PIN 1/16 X 1/2 | 1 | |
RHD, 2240 | WASHER 1/4 | 1 | |
9.1363 - CARBURETOR CONTROL - BELL CRANK AND BRACKET ASSY-CARB THROTTLE OPERATING | |||
Part Number | Application | Note | QTY |
2220-40 | - | 1 | |
2220-40 | LOCKWASHER 3/8 | 2 | |
2220-40 | SCREW 3/8-16 X 7/8 | 2 | |
2220-40 | SCREW 3/8-16 X 5/8 | 2 | |
9.1364 - CARBURETOR CONTROL - BRACKET AND STUD ASSY-CARB THROTTLE OPERATING BELL CRANK | |||
Part Number | Application | Note | QTY |
2220-40 | STUD | 1 | |
2220-40 | - | 1 | |
9.1365 - CARBURETOR CONTROL - LINK-CARB THROTTLE OPERATING BELL CRANK | |||
Part Number | Application | Note | QTY |
2220-40 | CLEVIS CLIP, UPPER | 1 | |
2220-40 | CLEVIS CLIP, LOWER | 1 | |
2220-40 | - | 1 | |
9.139 - CARBURETOR CONTROL - SPRING-CARB THROTTLE OPERATING ROD RETRACTING | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | ELECTROMATIC CLUTCH | 1 | |
2220-40 | - | 1 | |
ALL 23RD | ULTRAMATIC | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | - | 1 | |
ALL 54TH | ULTRAMATIC, GEAR START TYPE | 1 | |
9.140 - CARBURETOR CONTROL - BRACKET-CARB THROTTLE OPERATING ROD RETRACTING SPRING | |||
Part Number | Application | Note | QTY |
2206-13-26-33; 2313 | ELECTROMATIC CLUTCH | 1 | |
2201-02-11-22-32; 2301-02-32 | ELECTROMATIC CLUTCH | 1 | |
2306-33 | - | 1 | |
2301-02-32 | ULTRAMATIC | 1 | |
9.1415 - CARBURETOR CONTROL - SHAFT & BRKT ASSY-CARB THROTTLE OPERATING (CROSS SHAFT) | |||
Part Number | Application | Note | QTY |
2201-02-11-22-32; 2301-02-32 | ELECTROMATIC CLUTCH | 1 | |
2206-13-26-33; 2313 | - | 1 | |
2201-02-11-22-32; 2301-02-32 | - | 1 | |
2206-13-26-33; 2313 | ELECTROMATIC CLUTCH | 1 | |
2306-33 | - | 1 | |
2302-32 | ULTRAMATIC | 1 | |
2301 | ULTRAMATIC | 1 | |
2401-02-13; 2501-02-13-31; 2601-02-11-13-26-31-33; 5400-01-02-11-33 | - | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | - | 1 | |
ALL 24TH; 25TH; 26TH; 5400-01-02-11-33 | ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5400-01-02-11-33 | ULTRAMATIC, GEAR START TYPE | 1 | |
5406-13-26-31 | ULTRAMATIC, GEAR START TYPE | 1 | |
5406-13-26-31 | ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5413-26 | - | 1 | |
ALL 22ND; 23RD; 24TH | LOCKWASHER 1/4 | 2 | |
ALL 24TH; 25TH; 26TH; 54TH | NUT 1/4-20 | 2 | |
ALL 24TH; 25TH; 26TH; 54TH | LOCKWASHER 1/4 | 2 | |
ALL 22ND; 23RD | SPACER 1/4 X 3/32 THICK | 2 | |
ALL 24TH; 25TH; 26TH; 54TH | WASHER 1/4 | 2 | |
ALL 24TH; 25TH; 26TH; 54TH | SCREW 1/4-20 X 5/8 | 2 | |
ALL 22ND; 23RD | SCREW 1/4-20 X 9/16, TO INTAKE MANIFOLD | 2 | |
ALL 22ND; 24TH; 25TH; 26TH; 54TH | SCREW 1/4-20 X 9/16, TO CYL HEAD | 2 | |
9.142 - CARBURETOR CONTROL - SHAFT-CARB THROTTLE OPERATING | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | SPRING WASHER | 2 | |
ALL 22ND; 23RD | WASHER 5/16 | 2 | |
2201-02-06-11-13-22-26-32-33; 2301-02-13-32 | - | 1 | |
2306-33 | - | 1 | |
2301-02-32 | ULTRAMATIC | 1 | |
ALL 22ND; 23RD | COTTER PIN 3/32 X 1/2 | 2 | |
9.143 - CARBURETOR CONTROL - BRACKET-CARB THROTTLE OPERATING SHAFT | |||
Part Number | Application | Note | QTY |
2206-13-26-33; 2306-13-33 | RIGHT | 1 | |
2201-02-11-22-32; 2301-02-32 | RIGHT | 1 | |
2201-02-06-11-13-22-26-32-33; ALL 23RD | LEFT | 1 | |
9.144 - CARBURETOR CONTROL - LEVER-CARB THROTTLE OPERATING SHAFT | |||
Part Number | Application | Note | QTY |
2206-13-26-33; 2313 | ELECTROMATIC CLUTCH | 1 | |
2201-02-11-22-32; 2301-02-32 | ELECTROMATIC CLUTCH | 1 | |
2306-33 | - | 1 | |
2302-32 | ULTRAMATTC | 1 | |
2301 | ULTRAMATIC | 1 | |
ALL 22ND; 23RD | PIN | 1 | |
9.150 - CARBURETOR CONTROL - ROD ASSY-CARB TH OPER SHFT LEVER TO TRANS CONT RELAY LEVER | |||
Part Number | Application | Note | QTY |
2306-33 | - | 1 | |
2301-02-32 | - | 1 | |
ALL 23RD | COTTER PIN 1/16 X 1/2, YOKE END PIN | 2 | |
ALL 23RD | YOKE END 1/4 | 1 | |
ALL 23RD | NUT 1/4-28, YOKE END | 1 | |
ALL 23RD | PIN 1/4, YOKE END | 2 | |
9.1503 - CARBURETOR CONTROL - ROD ASSY-CARB TH OPER SHFT LEVER TO TH VALVE OUTER LEVER | |||
Part Number | Application | Note | QTY |
ALL 24TH; 25TH; 26TH; 54TH | SPRING WASHER | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | WASHER | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | ULTRAMATIC, NOT GEAR START TYPE | 1 | |
RHD, 2401; 2501; 2601-11; 5400-01-11 | - | 1 | |
ALL 54TH | ULTRAMATIC, GEAR START TYPE | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | COTTER PIN 1/16 X 1/2 | 2 | |
ALL 24TH; 25TH; 26TH; 54TH | CLEVIS PIN 1/4 X 51/64 | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | GROOVE PIN 1/4 X 1/4 | 1 | |
9.151 - CARBURETOR CONTROL - LEVER-CARBURETOR TRANS CONTROL RELAY | |||
Part Number | Application | Note | QTY |
ALL 23RD | SPRING WASHER | 1 | |
ALL 23RD | ULTRAMATIC | 1 | |
ALL 23RD | WASHER | 1 | |
ALL 23RD | COTTER PIN | 1 | |
9.152 - CARBURETOR CONTROL - ROD ASSY-CARB TRANS CONTROL RELAY LEVER TO TRANS | |||
Part Number | Application | Note | QTY |
ALL 23RD | ULTRAMATIC | 1 | |
ALL 23RD | COTTER PIN 1/16 X 1/2 | 2 | |
ALL 23RD | YOLK END PIN 1/4 | 2 | |
9.200 - CARBURETOR CONTROL - PUMP ASSY-FUEL AND VACUUM | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | LOCKWIRE, 11 LONG | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 5402-06-13-26-31 | SCREW 3/8-16 X 1-3/4, USE WITH AC PUMP | 2 | |
2201-02-11-20-22-32-40; 2301-02-32; 2401 | - | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2401-02-06-13; ALL 25TH; 26TH; 5402-06-13-26-31 | AC #1539606 OR #1539920 | 1 | |
2601-11-13; 5400-01-11-33 | CARTER | 1 | |
2601-11-33; 5400-01-11-33 | SCREW 3/8-16 X 1-1/2, USE WITH CARTER PUMP | 2 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | WASHER 3/8 | 1 | |
ALL 22ND; 23RD; 2401 | CONNECTOR, 1/4 FLARED TUBE, TO WINDSHIELD WIPER AND INTAKE MANIFOLD TUBES | 2 | |
2201-02-11-20-22-32-40; 2301-02-32; ALL 24TH; 25TH; 26TH; 54TH | CONNECTION, GASOLINE OUTLET | 1 | |
2206-13-26-33; 2306-13-33 | CONNECTION, GASOLINE OUTLET | 1 | |
9.2001 - FUEL PUMP - REPAIR KIT | |||
Part Number | Application | Note | QTY |
ALL 24TH | USE WITH DOUBLE ACTING PUMP | 1 | |
ALL 25TH; 26TH | USE WITH PUMPS STAMPED WITH AC #9606 ON MOUNTING FLANGE | 1 | |
5402-06-13-26-31 | - | 1 | |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
ALL 25TH; 26TH | USE WITH PUMPS STAMPED WITH AC #9920 ON MOUNTING FLANGE | 1 | |
ALL 22ND; 23RD; 2401 | - | 1 | |
9.2002 - FUEL PUMP - DIAPHRAGM KIT | |||
Part Number | Application | Note | QTY |
ALL 24TH | FUEL, USE WITH DOUPLE ACTING PUMP | 1 | |
ALL 25TH; 26TH | FUEL, USE WITH PUMPS STAMPED WITH AC #9606 ON MOUNTING FLANGE | 1 | |
5402-06-13-26-31 | FUEL | 1 | |
ALL 24TH | VACUUM, USE WITH DOUBLE ACTING PUMP | 1 | |
ALL 25TH; 26TH | VACUUM, USE WITH PUMPS STAMPED WITH AC #9606 ON MOUNTING FLANGE | 1 | |
5402-06-13-26-31 | VACUUM | 1 | |
2601-11-33; 5400-01-11-33 | FUEL, CARTER | 1 | |
2601-11-33; 5400-01-11-33 | VACUUM, CARTER | 1 | |
ALL 25TH; 26TH | FUEL, USE WITH PUMPS STAMPED WITH AC #9920 ON MOUNTING FLANGE | 1 | |
ALL 25TH; 26TH | VACUUM, USE WITH PUMPS STAMPED WITH AC #9920 ON MOUNTING FLANGE | 1 | |
9.2003 - FUEL PUMP - BOWL-FUEL PUMP | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 5402-06-13-26-31 | USE WITH AC PUMP | 1 | |
9.20033 - FUEL PUMP - PLUG ASSEMBLY-FUEL PUMP BOWL DRAIN | |||
Part Number | Application | Note | QTY |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.20035 - FUEL PUMP - GASKET-BOWL DRAIN PLUG | |||
Part Number | Application | Note | QTY |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.2004 - FUEL PUMP - GASKET-BOWL | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 5402-06-13-26-31 | USE WITH AC PUMP | 1 | |
9.20042 - FUEL PUMP - PIN-FUEL PUMP CAM LEVER | |||
Part Number | Application | Note | QTY |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.20044 - FUEL PUMP - RETAINER-FUEL PUMP CAM LEVER PIN | |||
Part Number | Application | Note | QTY |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.20046 - FUEL PUMP - SPRING-FUEL PUMP CAM LEVER RETURN | |||
Part Number | Application | Note | QTY |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.20048 - FUEL PUMP - DIAPHRAGM-FUEL PUMP OUTLET AIRDOME | |||
Part Number | Application | Note | QTY |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.201 - FUEL PUMP - BUSHING-INSULATOR | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 5402-06-13-26-31 | USE WITH AC PUMP | 2 | |
2601-11-33; 5400-01-11-33 | USE WITH CARTER PUMP | 2 | |
9.2017 - FUEL PUMP - ELBOW-GASOLINE INLET | |||
Part Number | Application | Note | QTY |
2201-02-11-13-20-22-40; ALL 24TH; 25TH; 26TH; 54TH | - | 1 | |
9.203 - FUEL PUMP - GASKET-FUEL PUMP | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 1 | |
9.2032 - FUEL PUMP - STRAINER ASSEMBLY-FUEL PUMP | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 5402-06-13-26-31 | USE WITH AC PUMP | 1 | |
2601-11-33; 5400-01-11-33 | CARTER | 1 | |
9.2035 - FUEL PUMP - SHIELD ASSEMBLY-HEAT | |||
Part Number | Application | Note | QTY |
2201-02-11-22-32; 2301-02-32 | - | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2220-40 | - | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | - | 1 | |
9.2036 - FUEL PUMP - BRACKET-HEAT SHIELD LOWER | |||
Part Number | Application | Note | QTY |
ALL 24TH; 25TH; 26TH; 54TH | SCREW #10-24 X 1/2 | 1 | |
ALL 22ND; 23RD | - | 1 | |
ALL 24TH; 25TH; 26TH; 54TH | - | 1 | |
ALL 22ND; 23RD | SCREW #10-32 X 1/4, LOWER BRACKET | 2 | |
ALL 22ND; 23RD | LOCKWASHER #10 | 2 | |
9.205 - FUEL PUMP - WASHER-INSULATING | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 2 | |
9.209 - FUEL PUMP - TUBE ASSY-FUEL PUMP TO CARB | |||
Part Number | Application | Note | QTY |
2201-02-11-22-32 | - | 1 | |
2301-02-32 | USED WITH WDO TYPE CARBURETOR | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2220-40 | - | 1 | |
2301 | USED WITH WGD TYPE CARBURETOR | 1 | |
ALL 24TH; 25TH; 26TH | USE WITH AC PUMPS | 1 | |
2601-11-33 | USE WITH CARTER PUMPS | 1 | |
ALL 54TH | - | 1 | |
2602-06-26-31 | USE WITH AIR CONDITION | 1 | |
9.2093 - FUEL PUMP - CLIP-FUEL PUMP TO CARB TUBE | |||
Part Number | Application | Note | QTY |
2202-22-32; 2302-32 | - | 1 | |
2202-22-32; 2302-32 | NUT 1/4-20 | 1 | |
2202-22-32; 2302-32 | SCREW 1/4-20 X 7/16 | 1 | |
9.2094 - FUEL PUMP - PLATE-FUEL PUMP TO CARB TUBE CLIP | |||
Part Number | Application | Note | QTY |
2202-22-32; 2302-32 | - | 1 | |
9.2095 - FUEL PUMP - TUBE ASSEMBLY-FUEL PUMP TO GASOLINE FILTER | |||
Part Number | Application | Note | QTY |
ALL 26TH; 54TH | - | 1 | |
9.211 - FUEL PUMP - TUBE ASSY-FUEL AND VACUUM PUMP TO INTAKE MANIFOLD | |||
Part Number | Application | Note | QTY |
2201-02-11-22-32; 2301-02-32 | - | 1 | |
2206-13-26-33; 2306-13-33 | - | 1 | |
2220-40 | - | 1 | |
2401 | - | 1 | |
ALL 24TH; 25TH; 26TH | USE WITH DOUBLE ACTING PUMP | 1 | |
ALL 54TH | - | 1 | |
ALL 25TH; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | USE WITH POWER BRAKE | 1 | |
9.2112 - FUEL PUMP - HOSE-FUEL AND VACUUM PUMP | |||
Part Number | Application | Note | QTY |
ALL 24TH; 25TH; 26TH; 54TH | TO WINDSHIELD WIPER AND INTAKE MANIFOLD TUBES | 2 | |
9.300 - TANK - TANK ASSEMBLY-GASOLINE | |||
Part Number | Application | Note | QTY |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | - | 1 | |
2201-11-40; 2301 | - | 1 | |
2202-06-20-22-26-32-33; 2302-06-32-33 | - | 1 | |
2401-02-06 | - | 1 | |
2501-02-06-31; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | DRAIN PLUG 1/4-18 | 1 | |
9.3005 - TANK - INLET ASSEMBLY | |||
Part Number | Application | Note | QTY |
2213; 2313 | SCREW 3/8-16 X 5/8 | 2 | |
2213; 2313 | - | 1 | |
9.302 - TANK - CAP ASSEMBLY-INLET | |||
Part Number | Application | Note | QTY |
ALL 22ND; 2413; 2513; 2613-33; 5413-33 | - | 1 | |
ALL 23RD | INSIDE LOCKING TYPE | 1 | |
ALL 23RD | OUTSIDE LOOKING TYPE | 1 | |
2401-02-06; 2501-02-06-31; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | - | 1 | |
9.3045 - TANK - HOSE-INLET | |||
Part Number | Application | Note | QTY |
2213 | CLAMP, VENT HOSE | 2 | |
2213 | FILLER | 1 | |
2213 | CLAMP, FILLER HOSE | 2 | |
2213 | VENT | 1 | |
2401-02-06; 2501-02-06-31 | VENT, 1/2 I.D | 1 | |
2401-02-06; 2501-02-06-31 | CLAMP, VENT HOSE, FOR 1/2 I.D. HOSE | 2 | |
2501-02-06-31; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | VENT, 3/4 I.D | 1 | |
2501-02-06-31; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | CLAMP, VENT HOSE, FOR 3/4 I.D. HOSE | 2 | |
9.3055 - TANK - WHISTLE ASSEMBLY-INLET VENT | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 2413; 2513; 2613-33; 5413-33 | - | 1 | |
9.306 - TANK - STRAP AND ANTI-SQUEAK ASSEMBLY-SUPPORT | |||
Part Number | Application | Note | QTY |
2213; 2313 | - | 2 | |
2202-06-20-22-26-32-33; 2302-06-32-33 | - | 2 | |
2201-11-40; 2301 | - | 2 | |
2401-02-06; 2501-02-06-31; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | - | 2 | |
2413; 2513; 2613-33; 5413-33 | - | 2 | |
9.307 - TANK - ANTI-SQUEAK-SUPPORT STRAP | |||
Part Number | Application | Note | QTY |
2201-11-13-40; 2301-13 | - | 2 | |
2413; 2513; 2613-33; 5413-33 | 3-1/4 X 23 LONG | 2 | |
2202-06-20-22-26-32-33; 2302-06-32-33 | - | 2 | |
2401-02-06; 2501-02-06-31; 2601-02-06-11-26-31 | 28 LONG | 2 | |
2413; 2513; 2613-33; 5413-33 | 1-1/4 X 22-3/4 LONG | 2 | |
2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | 1-1/4 X 8 LONG | 2 | |
9.308 - TANK - TEE BOLT-SUPPORT | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | - | 2 | |
ALL 24TH; 25TH; 26TH; 54TH | - | 2 | |
ALL 26TH; 54TH | NUT AND WASHER 3/8-16 | 2 | |
ALL 22ND; 23RD; 24TH; 25TH | LOCKWASHER 3/8 | 2 | |
ALL 22ND; 23RD | NUT 3/8-24 | 2 | |
ALL 24TH; 25TH | NUT 3/8-16 | 2 | |
9.309 - TANK - LINER-GASOLINE TANK TO FRAME | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | - | 2 | |
9.400 - TUBING - TUBE ASSY-GASOLINE MAIN | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD | SCREW 5/16-18 X 9/16 | 1 | |
2240 | - | 1 | |
2213; 2313 | - | 1 | |
2220 | - | 1 | |
2222 | - | 1 | |
2226 | - | 1 | |
2206-33 | - | 1 | |
2306-32-33 | WITH BRAZED TUBE CONNECTOR | 1 | |
2201-02-11-31 | ALSO ORDER 1 OF 419506 INLET HOSE AND 1 OF G173172 CLIP | 1 | |
2301 | WITH FLARED TUBE ENDS. WHEN REPLACING TUBE WITH BRAZED CONNECTOR, ALSO ORDER CLIP G173172 AND INLET HOSE 419506 | 1 | |
2306-32-33 | WITH FLARED TUBE ENDS | 1 | |
2302 | WITH FLARED TUBE ENDS. WHEN REPLACING TUBE WITH BRAZED CONNECTOR, ALSO ORDER CLIP G173172 AND INLET HOSE 419506 | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501; 2601-11; 5400-01-11 | NOT USED WITH BODY 5467 | 1 | |
2402-06; 2502-06; 2602-06; 5402-06 | - | 1 | |
2413; 2513; 2613; 5413 | - | 1 | |
2401 (BODIES 2467-69); 2531; 2631; 5431 | - | 1 | |
5411 (BODY 5467) | - | 1 | |
2633; 5433 | - | 1 | |
2626; 5426 | - | 1 | |
ALL 24TH | CONNECTOR, GAS TANK | 1 | |
9.4005 - TUBING - CLIP-TUBE | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | SCREW 5/16-18 X 9/16 TO FRAME CLIP | X | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | TO FRAME | X | |
2206-13-22-26-33; 2306-13-32-33 | TO ENGINE STABILIZER SUPPORT | 1 | |
2213; 2313 | TO RADIATOR SUPPORT | 1 | |
2201-02-11-20-22-33-40; 2301-02 | TO FRONT CHANNEL | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | TO FRAME | X | |
9.4006 - TUBING - CONNECTION-TUBE FRAME | |||
Part Number | Application | Note | QTY |
2201-02-11-22-32; 2301 | ALSO ORDER ONE OF G127753 CLIP | 1 | |
2220-40; 2302 | - | 1 | |
2206-13-26-31; 2306-13-32-33 | - | 1 | |
9.406 - TUBING - HOSE ASSY-FUEL PUMP INLET | |||
Part Number | Application | Note | QTY |
ALL 22ND; 2313; 2413; 2513; 2613-33; 5413-33 | - | 1 | |
2301-02-06-33 | USE WITH GAS TUBE WITH BRAZED CONNECTOR | 1 | |
2332 | USE WITH GAS TUBE WITH BRAZED CONNECTOR | 1 | |
2301-02-06-33 | USE WITH FLARED END GAS TUBE | 1 | |
2401-02-06; 2501-02-06-31; 2601-02-06-11-26-31; 5400-01-02-06-11-26-31 | - | 1 | |
9.407 - TUBING - HOSE-GAS TUBE INSULATOR | |||
Part Number | Application | Note | QTY |
ALL 24TH; 25TH; 26TH; 54TH | TO #1 BODY BRACKET | 1 |