Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
1948-1954 - GROUP 12 - REAR AXLE
12.000 - REAR AXLE-CARRIER - BEARING-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 2 | |
12.0005 - REAR AXLE-CARRIER - ADJUSTING NUT-BEARING | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 2 | |
ALL 22ND; 23RD; 24TH; 25TH; 2613; 5413 | COTTER PIN 7/32 X 3/4 | 2 | |
ALL 26TH; 54TH | COTTER PIN 3/16 X 1 | 2 | |
12.0008 - REAR AXLE-CARRIER - LUBRICANT-REAR AXLE HYPOID | |||
Part Number | Application | Note | QTY |
ALL 24TH; 25TH; 26TH; 54TH | 2 QUARTS | 1 | |
12.001 - REAR AXLE-CARRIER - CARRIER ASSY-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 2613; 5413 | BOLT 3/8-24 X 1-3/16, TO CASE | 9 | |
ALL 22ND; 23RD; 24TH; 25TH; 2613; 5413 | GASKET, TO CASE BOLT | 9 | |
ALL 22ND; 23RD; 24TH; 25TH | NUT 3/8-24, SELF-LOCKING | 9 | |
2601-02-06-11-26-31-32 | BOLT 3/8-24 X 1-9/32, TO CASE | 9 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | SEAL, TO CASE BOLT | 9 | |
2401-02; 2501-02-31 | 3.9 TO 1 RATIO, STD AND OD TRANS , SPICER, INCLUDES ADAPTOR KIT | 1 | |
2401-02; 2501-02-31 | 4.1 TO 1 RATIO, STD AND OD TRANS , SPICER, INCLUDES ADAPTOR KIT | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501 | 3.54 TO 1 RATIO, ULTRAMATIC, INCLUDES ADAPTOR KIT | 1 | |
2501 | 3.54 TO 1 RATIO, ULT, WITH 300 ENGINE, USE WITH 2-1/2 DIA SHAFT, INCLUDES ADAPTOR KIT | 1 | |
2401 (BODIES 2467-69); 2402-06; 2502-06-31 | 3.54 TO 1 RATIO, ULTRAMATIC, INCLUDES ADAPTOR KIT | 1 | |
2401 | 3.54 TO 1 RATIO, ULT WITH 300 ENGINE, INCLUDES ADAPTOR KIT | 1 | |
2501 | 3.54 TO 1 RATIO, ULT, WITH 300 ENGINE, USE WITH 2-3/4 DIA DRIVE SHAFT, INCLUDES ADAPTOR KIT | 1 | |
ALL 26TH | NUT 3/8-24, SELF LOCKING | 9 | |
5400-01-02-06-11-26-31-33 | BOLT 3/8-24 X 1-13/32 | 9 | |
ALL 54TH | NUT 3/8-24, HUGLOCK | 9 | |
2222-26; 2413; 2513 | 4.36 TO 1 | 1 | |
2613; 5413 | 4.36 TO 1 RATIO | 1 | |
2206-22-26-33 | 4.09 TO 1 | 1 | |
2213; 2313; 2413; 2513 | WITH OD, 4.7 TO 1 | 1 | |
2613; 5413 | 4.7 TO 1 RATIO | 1 | |
2206-33; 2306-33 | 3.92 TO 1 | 1 | |
2213-20; 2313; 2413; 2513 | 4.54 TO 1 | 1 | |
2613; 5413 | 4.54 TO 1 RATIO | 1 | |
2626; 5426 | 4.55 TO 1 STD RATIO, OVERDRIVE | 1 | |
2633; 5433 | 4.55 TO 1 STD RATIO, STD AND OD TRANS | 1 | |
2201-11-40; 2301; 2401; 2501 | 4.3 TO 1 RATIO | 1 | |
2201-02-11-32; 2301-02-32 | 4.1 TO 1 RATIO | 1 | |
2201-02-11-32; 2301-02-32 | 3.9 TO 1 RATIO | 1 | |
2240 (BODY 2286) | 4.55 TO 1 | 1 | |
2306-33 | WITH ULTRAMATIC, 3.54 TO 1 | 1 | |
2302-32 | 3.54 TO 1 RATIO | 1 | |
2601-02-06-11-31 | 3.9 TO 1 RATIO, STD TRANS | 1 | |
2626 | 3.9 TO 1 STD RATIO, ULTRAMATIC | 1 | |
2601-02-06-11-31-33 | 4.1 TO 1 RATIO, OVERDRIVE | 1 | |
2626 | 4.1 TO 1 STD RATIO, STD TRANS | 1 | |
2633 | 4.1 TO 1 STD RATIO, ULTRAMATIC | 1 | |
2601-02-11-31 | 3.54 TO 1 OPT RATIO, OVERDRIVE | 1 | |
2602-06-31 | 3.54 TO 1 STD RATIO, ULTRAMATIC | 1 | |
2611 | 3.54 TO 1 OPT RATIO, ULTRAMATIC, USE WITH 2-3/4 DIA DRIVE SHAFT | 1 | |
2601 | 3.54 TO 1 STD RATIO, ULTRAMATIC | 1 | |
2611 | 3.54 TO 1 OPT RATIO, ULTRAMATIC, USE WITH 2-1/2 DIA DRIVE SHAFT | 1 | |
2602-06-31 | 3.23 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
2611 | 3.23 TO 1 STD RATIO, ULTRAMATIC, USE WITH 2-3/4 DIA DRIVE SHAFT | 1 | |
2601 | 3.23 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
2611 | 3.23 TO 1 STD RATIO, ULTRAMATIC, USE WITH 2-1/2 DIA DRIVE SHAFT | 1 | |
5400 | 3.9 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5401-11 | 3.9 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5400 | 3.9 TO 1 STD RATIO, STD TRANS | 1 | |
5400 | 3.9 TO 1 OPT RATIO, OVERDRIVE | 1 | |
5401-11 | 3.9 TO 1 STD RATIO, STD TRANS | 1 | |
5401-11 | 3.9 TO 1 OPT RATIO, OVERDRIVE | 1 | |
5402 | 3.9 TO 1 STD RATIO, STD TRANS | 1 | |
5402 | 3.9 TO 1 OPT RATIO, OVERDRIVE | 1 | |
5426 | 3.9 TO 1 STD RATIO, ULTRAMATIC | 1 | |
5402-06-31 | 3.9 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5400 | 3.23 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5400 | 3.23 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5401-11 | 3.23 TO 1 STD RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5401-11 | 3.23 TO 1 STD RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5402-06-31 | 3.23 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5402 | 3.23 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5406 | 3.23 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5431 | 3.23 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5402-06-31 | 3.54 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5402-06-31 | 3.54 TO 1 STD RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5400 | 3.54 TO 1 STD RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5400 | 3.54 TO 1 STD RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5401-11 | 3.54 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5400 | 3.54 TO 1 OPT RATIO, OVERDRIVE | 1 | |
5401-11 | 3.54 TO 1 OPT RATIO, OVERDRIVE | 1 | |
5402 | 3.54 TO 1 OPT RATIO, OVERDRIVE | 1 | |
5400 | 4.1 TO 1 STD RATIO, OVERDRIVE | 1 | |
5400 | 4.1 TO 1 OPT RATIO, STD TRANS | 1 | |
5401-11 | 4.1 TO 1 STD RATIO, OVERDRIVE | 1 | |
5401-11 | 4.1 TO 1 OPT RATIO, STD TRANS | 1 | |
5402 | 4.1 TO 1 STD RATIO, OVERDRIVE | 1 | |
5402 | 4.1 TO 1 OPT RATIO STD TRANS | 1 | |
5426-33 | 4.1 TO 1 STD RATIO, STD AND OD TRANS | 1 | |
5402-06-31 | 4.1 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5433 | 4.1 TO 1 STD RATIO, ULTRAMATIC | 1 | |
5400 | 4.1 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5401-11 | 4.1 TO 1 OPT RATIO, ULTRAMATIC, NOT GEAR START TYPE | 1 | |
5401-11 | 3.07 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5402 | 3.07 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5406 | 3.07 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
5431 | 3.07 TO 1 OPT RATIO, ULTRAMATIC, GEAR START TYPE | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 2613; 5413 | OIL PLUG 1/2, SQUARE HEAD | 2 | |
12.0015 - REAR AXLE-CARRIER - CARRIER AND CAP ASSY-DIFF | |||
Part Number | Application | Note | QTY |
2206-33 | USE ONLY WITH 3.92 TO 1 RATIO | 1 | |
2306-33 | ULTRAMATIC | 1 | |
2206-13-20-22-26-33; 2313; 2413; 2513; 2613; 5413 | - | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
5400-01-11 | - | 1 | |
5402-06-26-31-33 | - | 1 | |
2601-02-06-11-26-31-33 | - | 1 | |
5400-01-11 | USE WITH 3.07 TO 1 RATIO | 1 | |
5402-06-26-31-33 | USE WITH 3.07 TO 1 RATIO | 1 | |
12.002 - REAR AXLE-CARRIER - CAP-DIFF CARRIER | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | SCREW 1/2-20 X 2-1/2 | 4 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | SCREW LOCK | 4 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 2 | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | SCREW 1/2-20 X 2-1/4 | 4 | |
12.003 - REAR AXLE-CARRIER - GASKET-DIFF CARRIER TO CASE | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
12.0035 - REAR AXLE-CARRIER - SEAL-DIFF CARRIER TO CASE | |||
Part Number | Application | Note | QTY |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 1 | |
12.004 - REAR AXLE-CARRIER - CASE-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
2206-33 | USED WITH 3.92 TO 1 RATIO | 1 | |
2306-33 | ULTRAMATIC | 1 | |
2206-13-20-22-26-33; 2313; 2413; 2513; 2613; 5413 | - | 1 | |
2201-11; 2301 | USED ONLY WITH 4.3 TO 1 RATIO | 1 | |
2240 | - | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501 | USE ONLY WITH 4.3 TO 1 RATIO | 1 | |
2201-02-11-32; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
5401-02-06-11 | USE ONLY WITH 3.07 TO 1 RATIO | 1 | |
5431 (BODY 5477) | USE ONLY WITH 3.07 TO 1 RATIO | 1 | |
2601-02-06-11-26-31-33 | - | 1 | |
5400-01-02-06-11-26-31-33 | - | 1 | |
12.005 - REAR AXLE-CARRIER - GEAR AND PINION ASSY-DIFF DRIVING | |||
Part Number | Application | Note | QTY |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | SCREW 3/8-24 X 3/4 | 12 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | SCREW 3/8-24 X 25/32, SLOTTED, SELF LOCKING | 12 | |
2206-13-20-22-26-33; 2306-13-33; 2413 2513; 2613; 5413 | SCREW 7/16-20 X 15/16, SLOTTED, SELF LOCKING | 12 | |
2201-11; 2301; 2401 (BODIES-2462-65-92-95-98); 2501 | 4.3 TO 1 | 1 | |
2240 (BODY 2282) | 4.3 TO 1 | 1 | |
2240 (BODY 2286) | 4.55 TO 1 | 1 | |
2222-26; 2332; 2413; 2513; 2613; 5413 | 4.36 TO 1 | 1 | |
2206-22-26-33 | 4.09 TO 1 | 1 | |
2213-20; 2313; 2413; 2513; 2613; 5413 | 4.54 TO 1 | 1 | |
2213; 2313; 2413; 2513; 2613; 5413 | 4.7 TO 1 | 1 | |
2206-33; 2306-33 | 3.92 TO 1 | 1 | |
2201-02-11-32; 2301-02-32; 2401-02-06-31; 2501-02-06-31 | 4.1 TO 1 | 1 | |
2201-02-11-32; 2301-02-32; 2401-02-06; 2501-02-06-31 | 3.9 TO 1 | 1 | |
2302-32; 2401-02-06; 2501-02-06-31 | 3.54 TO | 1 | |
2306-33 | 3.54 TO | 1 | |
2601-02-06-11-31 | 3.23 TO | 1 | |
2601-02-06-11-31 | 3.54 TO | 1 | |
2601-02-06-11-26-31 | 4.1 TO 1 | 1 | |
2601-02-06-11-26-31 | 3.9 TO 1 | 1 | |
2626-33; 5401-11-26-33 | 4.55 TO 1 | 1 | |
5400-01-02-06-11-31 | 3.54 TO 1 | 1 | |
5400-01-02-06-11-26-31-33 | 4.1 TO 1 | 1 | |
5400-01-02-06-11-26-31 | 3.9 TO 1 | 1 | |
5400-01-02-06-11-31 | 3.23 TO 1 | 1 | |
5401-02-06-11-31 | 3.07 TO 1 | 1 | |
12.006 - REAR AXLE-CARRIER - IDLER-DIFF DRIVING GEAR | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
12.007 - REAR AXLE-CARRIER - LOCKING PLATE-DIFF DRIVING GEAR IDLER | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
ALL 22ND; 23RD; 24TH; 2513; 2613; 5413 | WASHER | 1 | |
ALL 22ND; 23RD; 24TH; 2513; 2613; 5413 | LOCKWASHER 5/16 | 1 | |
ALL 22ND; 23RD; 24TH; 2513; 2613; 5413 | SCREW 5/16-18 X 5/8 | 1 | |
12.008 - REAR AXLE-CARRIER - SHAFT-DIFF DRIVING GEAR IDLER | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
ALL 22ND; 23RD; 24TH; 2513; 2613; 5413 | LOCKWASHER 9/16 | 1 | |
ALL 22ND; 23RD; 24TH; 2513; 2613; 5413 | NUT 9/16-18 | 1 | |
12.009 - REAR AXLE-CARRIER - ROLLER-DIFF DRIVING GEAR IDLER SHAFT BEARING | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13; 2413; 2513; 2613; 5413 | - | 28 | |
12.010 - REAR AXLE-CARRIER - WASHER-DIFF DRIVING GEAR IDLER SHAFT THRUST | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13; 2413; 2513; 2613; 5413 | - | 1 | |
12.0105 - REAR AXLE-CARRIER - BEARING-DIFF DRIVING PINION | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | FRONT | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | FRONT | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | REAR | 1 | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | REAR | 1 | |
2601-02-06-11-31 | REAR, 25 DEGREES, USE WITH 3.23 TO 1 AXLE RATIO | 1 | |
5400-01-11 | REAR, 25 DEGREES | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | FRONT | 1 | |
2601-02-06-11-26-31-33 | REAR, 40 DEGREES | 1 | |
5400-01-02-06-11-26-31-33 | REAR, 40 DEGREES | 1 | |
12.011 - REAR AXLE-CARRIER - SLEEVE-DIFF DRIVING PINION BEARING | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
2601-02-06-11-31 | 25 DEGREES, USE WITH 3.23 TO 1 AXLE RATIO | 1 | |
5400-01-11 | 25 DEGREES | 1 | |
2601-02-06-11-26-31-33 | 40 DEGREES | 1 | |
5400-01-02-06-11-26-31-33 | 40 DEGREES | 1 | |
12.012 - REAR AXLE-CARRIER - OIL SEAL ASSY-DIFF DRIVING PINION BEARING FRONT | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 1 | |
12.0161 - REAR AXLE-CARRIER - UNIVERSAL JOINT FLANGE-DIFF DRIVING PINION | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 2613; 5413 | WASHER | 1 | |
ALL 22ND | USED WITH MECHANICS JOINT | 1 | |
ALL 23RD | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 2613; 5413 | NUT | 1 | |
2201-02-06-11-32-33 | USED WITH SPICER JT WITH OVERDRIVE | 1 | |
2401-02 | USE WITH SPICER JOINT | 1 | |
2401 (BODIES 2467-69) | ULTRAMATIC | 1 | |
2501-02-31 | USE WITH SPICER JOINT | 1 | |
2401 (BODIES 2462-65-92-95-98); 2501 | ULTRAMATIC | 1 | |
2501 | ULTRAMATIC, WITH 300 ENGINE, USE WITH 2-1/2 DIA SHAFT | 1 | |
2401 | ULTRAMATIC, WITH 300 ENGINE | 1 | |
2402-06; 2502-06-31 | ULTRAMATIC | 1 | |
2501 | ULTRAMATIC, WITH 300 ENGINE, USE WITH 2-3/4 DIA SHAFT | 1 | |
2413; 2501-02-13-31; 2613; 5413 | USE WITH MECHANICS JOINT | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | WASHER | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | NUT | 1 | |
2601-02-11-26-31-33; 5400-01-02-11-26-33 | USE WITH SPICER JT | 1 | |
2602-06-31-33; 5402-06-31-33 | ULTRAMATIC | 1 | |
2611 | ULTRAMATIC, USE WITH 2-3/4 DIA SHAFT | 1 | |
2601; 5400-01-11 | ULTRAMATIC | 1 | |
2611 | ULTRAMATIC, USE WITH 2-1/2 DIA SHAFT | 1 | |
12.0162 - REAR AXLE-CARRIER - DUST SHIELD-DIFF DRIVING PINION UNIV JT FLANGE | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH | 1.618 ID | 1 | |
ALL 24TH; 25TH; 2613; 5413 | 1.628 ID | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 1 | |
12.017 - REAR AXLE-CARRIER - SPACER-DIFF DRIVING PINION UNIV JT FLANGE | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-32-33; 2413; 2513; 2613; 5413 | - | 1 | |
12.018 - REAR AXLE-CARRIER - PINION-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40 | - | 2 | |
2201-02-11-32-40 | REVACYCLE TEETH | 2 | |
2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 2 | |
12.019 - REAR AXLE-CARRIER - PIN-DIFF PINION | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | LOCK PIN | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
2601-02-06-11-26-31-33 | - | 1 | |
5400-01-02-06-11-26-31-33 | - | 1 | |
12.0194 - REAR AXLE-CARRIER - THRUST BLOCK-DIFF AXLE SHAFT | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 1 | |
12.0198 - REAR AXLE-CARRIER - SPACER-DIFF AXLE SHAFT THRUST BLOCK | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
12.020 - REAR AXLE-CARRIER - THRUST WASHER-DIFF PINION | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
2601-02-06-11-26-31-33 | - | 2 | |
5400-01-02-06-11-26-31-33 | - | 2 | |
12.021 - REAR AXLE-CARRIER - GEAR-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; 2613; 5413 | - | 2 | |
2201-02-11-32-40 | REVACYCLE TEETH | 2 | |
2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
2201-02-11-32-40 | - | 2 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | - | 2 | |
12.022 - REAR AXLE-CARRIER - THRUST WASHER-DIFF GEAR | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513 | .031 THICK | 2 | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513 | .036 THICK | 2 | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513 | .041 THICK | 2 | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513 | .046 THICK | 2 | |
2201-02-11-32-40; 2301-02-32 | .046 THICK | 2 | |
2201-02-11-32-40; 2301-02-32 | .031 THICK | 2 | |
2401-02-06; 2501-02-06-31 | - | 2 | |
2201-02-11-32-40; 2301-02-32 | .036 THICK | 2 | |
2201-02-11-32-40; 2301-02-32 | .041 THICK | 2 | |
ALL 26TH; 54TH | .036 THICK | 2 | |
ALL 26TH; 54TH | .041 THICK | 2 | |
ALL 26TH; 54TH | .046 THICK | 2 | |
ALL 26TH; 54TH | .031 THICK | 2 | |
12.023 - REAR AXLE-CASE & SHAFT - CASE ASSEMBLY | |||
Part Number | Application | Note | QTY |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | GASKET, LOCKNUT | 2 | |
2206-20-22-26-33 | - | 1 | |
2213; 2313 | - | 1 | |
2201-11 | INCLUDES SPRING BLOCKS AND U BOLTS, USED PRIOR TO MOTOR #220251 | 1 | |
2202-32 | INCLUDES SPRING BLOCKS AND U BOLTS, USED PRIOR TO MOTOR #410956 | 1 | |
2240 (BODY 2282) | INCLUDES SPRING BLOCKS AND U BOLTS, USED PRIOR TO MOTOR #2291 | 1 | |
2240 (BODY 2286) | INCLUDES SPRING BLOCKS AND U BOLTS, USED PRIOR TO MOTOR #3195 | 1 | |
2201-11 | USED AFTER MOTOR #220250 ALSO ORDER 4 OF 419389 | 1 | |
2240 (BODY 2282) | USED AFTER MOTOR #2290 ALSO ORDER 4 OF 419589 | 1 | |
2240 (BODY 2286) | USED AFTER MOTOR #3194 ALSO ORDER 4 OF 419389 | 1 | |
2202-32 | USED AFTER MOTOR #410955 ALSO ORDER 4 OF 419389 | 1 | |
2301-02-32 | - | 1 | |
2306-33 | - | 1 | |
2401-02-06; 2501-02-06-31 | - | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | PLUG 5/6-18 HEX | 2 | |
2413; 2513; 2613 | - | 1 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | GASKET, PLUG | 2 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | SET SCREW 1/2-20 X 1-1/4, TO CARRIER CAP STOP | 2 | |
2601-02-06-11-26-31-33; 5400-01-02-06-11-26-31-33 | LOCKNUT 1/2-20, SET SCREW | 2 | |
2633; 5433 | - | 1 | |
2601-02-06-11-26-31; 5402-06-26-31 | - | 1 | |
5411 | USE WITH 12 BRAKES | 1 | |
5400-01 | - | 1 | |
5411 | USE WITH 11 BRAKES | 1 | |
5413 | - | 1 | |
12.0235 - REAR AXLE-CASE & SHAFT - CLIP-CASE BRAKE TUBE | |||
Part Number | Application | Note | QTY |
ALL 22ND; 23RD; 24TH; 25TH; 26TH; 54TH | - | 2 | |
12.029 - REAR AXLE-CASE & SHAFT - SHAFT | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33; 2601-02-06-11-26-31; 5402-06-26-31 | WASHER 7/8 | 2 | |
5411 | WASHER 7/8, USE WITH 12 BRAKES | 2 | |
2206-13-20-22-26-33; 2306-13-33; 2413; ALL 26TH; 5402-06-13-26-31-33 | NUT 7/8-14 | 2 | |
5411 | NUT 7/8-14, USE WITH 12 BRAKES | 2 | |
2206-20-22-26-33; 2306-33 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | NUT 3/4-16 | 2 | |
5411 | NUT 3/4-16, USE WITH 11 BRAKES | 2 | |
2213; 2313 | - | 2 | |
2413; 2513; 2613; 5413 | - | 2 | |
2413; 2513; 2613-33; 5413-33 | WASHER 7/8 | 1 | |
2633; 5433 | - | 2 | |
2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
5400-01 | - | 2 | |
5411 | USE WITH 11 BRAKES | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | WASHER 3/4 | 2 | |
5411 | WASHER 3/4, USE WITH 11 BRAKES | 2 | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; ALL 26TH; 5402-06-13-26-31-33 | COTTER PIN 3/16 X 1-3/4 | 2 | |
5411 | COTTER PIN 3/16 X 1-3/4, USE WITH 12 BRAKES | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | COTTER PIN 1/8 X 1-3/8 | 2 | |
5411 | COTTER PIN 1/8 X 1-3/8, USE WITH 11 BRAKES | 2 | |
12.0295 - REAR AXLE-CASE & SHAFT - BEARING-SHAFT | |||
Part Number | Application | Note | QTY |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2213; 2313 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | - | 2 | |
5411 | USE WITH 11 BRAKES | 2 | |
2413; 2513; 2613-33; 5413-33 | - | 2 | |
12.030 - REAR AXLE-CASE & SHAFT - GUARD-SHAFT BEARING OIL | |||
Part Number | Application | Note | QTY |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | - | 2 | |
5411 | USE WITH 11 BRAKES | 2 | |
12.031 - REAR AXLE-CASE & SHAFT - GASKET-SHAFT BEARING OIL GUARD | |||
Part Number | Application | Note | QTY |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | - | 2 | |
5411 | USE WITH 11 BRAKES | 2 | |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | - | 2 | |
12.0313 - REAR AXLE-CASE & SHAFT - OIL SEAL KIT-SHAFT | |||
Part Number | Application | Note | QTY |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | 2 WHEEL | 1 | |
5411 | 2 WHEEL, USE WITH 11 BRAKES | 1 | |
2206-20-22-26-33; 2306-33 | 2 WHEEL | 1 | |
2213; 2313 | 2 WHEEL | 1 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | 1 WHEEL | 2 | |
5411 | 1 WHEEL, USE WITH 11 BRAKES | 2 | |
2206-20-22-26-33; 2306-33 | 1 WHEEL | 2 | |
2213; 2313 | 1 WHEEL | 2 | |
2413; 2513; 2613-33; 5413-33 | 1 WHEEL | 2 | |
2413; 2513; 2613-33; 5413-33 | 2 WHEEL | 1 | |
2601-02-06-11-26-31; 5402-06-26-31 | 1 WHEEL | 2 | |
5411 | 1 WHEEL, USE WITH 12 BRAKES | 2 | |
2601-02-06-11-26-31; 5402-06-26-31 | 2 WHEEL | 1 | |
5411 | 2 WHEEL, USE WITH 12 BRAKES | 1 | |
12.0315 - REAR AXLE-CASE & SHAFT - OIL SEAL-SHAFT BEARING | |||
Part Number | Application | Note | QTY |
2206-13-20-22-26-33; 2306-13-33 | OUTER | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | OUTER | 2 | |
5411 | OUTER, USE WITH 11 BRAKES | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | INNER | 2 | |
5411 | INNER, USE WITH 11 BRAKES | 2 | |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | INNER | 2 | |
5411 | INNER, USE WITH 12 BRAKES | 2 | |
2213; 2313 | INNER | 2 | |
2413; 2513; 2613-33; 5413-33 | INNER | 2 | |
2413; 2513; 2613-33; 5413-33 | OUTER | 2 | |
2601-02-06-11-26-31; 5402-06-26-31 | OUTER | 2 | |
5411 | OUTER, USE WITH 12 BRAKES | 2 | |
12.032 - REAR AXLE-CASE & SHAFT - RETAINER-SHAFT BEARING OIL SEAL | |||
Part Number | Application | Note | QTY |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2213; 2313; 2413; 2613-33; 5413-33 | - | 2 | |
12.033 - REAR AXLE-CASE & SHAFT - GASKET-SHAFT BEARING OIL SEAL RETAINER | |||
Part Number | Application | Note | QTY |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | - | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | - | 2 | |
5411 | USE WITH 11 BRAKES | 2 | |
12.034 - REAR AXLE-CASE & SHAFT - SHIM-SHAFT BEARING | |||
Part Number | Application | Note | QTY |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | .005 | X | |
5411 | .005, USE WITH 12 BRAKES | X | |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | .007 | X | |
5411 | .007, USE WITH 12 BRAKES, | X | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; ALL 26TH; 5402-06-13-26-31-33 | .020 | X | |
5411 | .020, USE WITH 12 BRAKES | X | |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | .005 | X | |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | .007 | X | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | .005 | X | |
5411 | .005, USE WITH 11 BRAKES | X | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | .007 | X | |
5411 | .007, USE WITH 11 BRAKES | X | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | .020 | X | |
5411 | .020, USE WITH 11 BRAKES | X | |
2206-13-20-22-26-33; 2306-13-33; 2413; 2513; ALL 26TH; 5402-06-13-26-31-33 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2201-02-11-32-40; 2301-02-32; 2401-02-06; 2501-02-06-31; 5400-01 | - | 2 | |
5411 | USE WITH 11 BRAKES | 2 | |
12.0341 - REAR AXLE-CASE & SHAFT - SEAL-SHAFT NUT OIL | |||
Part Number | Application | Note | QTY |
2206-20-22-26-33; 2306-33; 2601-02-06-11-26-31; 5402-06-26-31 | - | 2 | |
5411 | USE WITH 12 BRAKES | 2 | |
2213; 2313; 2413; 2513; 2613-33; 5413-33 | - | 2 |