Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
1955-1956 - GROUP 12 - REAR AXLE
12.000 - BEARING-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | CONE | 2 | |
5680-88 | CUP | 2 | |
5640-60-70 | CUP | 2 | |
12.0005 - ADJUSTING 55THNUT-BEARING | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 55TH | COTTER PIN 3/16 X 1 | 2 | |
12.0007 - SHIM-DIFFERENTIAL BEARING ADJUSTING | |||
Part Number | Application | Note | QTY |
ALL 56TH | .003 THICK | 2 | |
ALL 56TH | .005 THICK | 2 | |
ALL 56TH | .010 THICK | 2 | |
ALL 56TH | .030 THICK | 2 | |
12.0008 - LUBRICANT-REAR AXLE HYPOID | |||
Part Number | Application | Note | QTY |
ALL 55TH | 2 QUARTS | 1 | |
12.001 - CARRIER ASSEMBLY-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
ALL 55TH | SEAL TO CASE BOLT | 9 | |
ALL 55TH | BOLT 3/8-24 X 1 13/32 | 9 | |
ALL 55TH | NUT 3/8-24, HUGLOCK | 9 | |
5540-60 | 3.9 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5540-(BODY-5522) | 3.23 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5540-(BODY-5542-47) | 3.23 TO 1 STD RATIO, ULTRAMATIC | 1 | |
5560 | 3.23 TO 1 STD RATIO, ULTRAMATIC | 1 | |
5540-60 | 3.54 TO 1 OPT RATIO, STD AND OD TRANS | 1 | |
5540-60 | 3.54 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5540-60 | 4.1 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5580 | 3.54 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5580 | 3.23 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5540-60 | 3.9 TO 1 STD RATIO, STD AND OD TRANS | 1 | |
5540-60 | 4.1 TO 1 OPT RATIO, STD AND OD TRANS | 1 | |
5580 | 3.9 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5540-(BODY-5522) | 3.07 TO 1 STD RATIO, ULTRAMATIC | 1 | |
5540-(BODY-5542-47) | 3.07 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
5560 | 3.07 TO 1 OPT RATIO, ULTRAMATIC | 1 | |
12.0015 - CARRIER AND CAP ASSEMBLY-DIFF | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
12.002 - CAP-DIFF CARRIER | |||
Part Number | Application | Note | QTY |
ALL 55TH | SCREW 1/2-20 X 2 1/2 | 4 | |
ALL 55TH | SCREW LOCK | 4 | |
ALL 55TH | - | 2 | |
12.0035 - SEAL-DIFF CARRIER TO CASE | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
12.0037 - DIFFERENTIAL ASSEMBLY (INCLUDES CASE, RING GEAR, PINION AND SIDE GEARS) | |||
Part Number | Application | Note | QTY |
5680-88 | 3.554 TO 1 RATIO | 1 | |
5640-60 | 3.54 TO 1 RATIO | 1 | |
5640-60 | 3.07 TO 1 RATIO | 1 | |
12.0038 - DIFFERENTIAL ASSEMBLY (INCLUDES CASE, SIDE GEARS AND BREAKING IN OIL) | |||
Part Number | Application | Note | QTY |
5680-88 | POWER LOCK, USE WITH AXLE RATIO 2.87, 3.54, 3.31 AND 3.07 TO 1 | 1 | |
5680-88 | POWER LOCK, USE WITH AXLE RATIO 4.09 TO 1 | 1 | |
5640-60-70 | POWER LOCK, USE WITH AXLE RATIO 2.87, 3.54, 3.31 AND 3.07 TO 1 | 1 | |
5640-60-70 | POWER LOCK, USE WITH AXLE RATIO 4.09 TO 1 | 1 | |
12.004 - CASE-DIFFERENTIAL | |||
Part Number | Application | Note | QTY |
ALL 55TH | USE ONLY WITH 3.07 TO 1 RATIO | 1 | |
ALL 55TH | - | 1 | |
5640-60-70 | NOT USED WITH POWER LOCK | 1 | |
5680-88 | NOT USED WITH POWER LOCK | 1 | |
12.005 - GEAR AND PINION ASSEMBLY-DIFF DRIVING | |||
Part Number | Application | Note | QTY |
ALL 55TH | SCREW 3/8 X 25/32, SLOTTED, SELF LOCKING | 12 | |
ALL 56TH | SCREW 7/16-20 X 7/8 | 10 | |
5680-88 | 3.54 TO 1 | 1 | |
5640-60-70 | 3.54 TO 1 | 1 | |
5640-60-70 | 3.07 TO 1 | 1 | |
5640-60-70 | 3.31 TO 1 | 1 | |
5640-60-70 | 2.87 TO 1 | 1 | |
5680-38 | 3.31 TO 1 | 1 | |
5680-88 | 3.07 TO 1 | 1 | |
5640-60-70 | 4.09 TO 1 | 1 | |
5680-88 | 2.87 TO 1 | 1 | |
5680-38 | 4.1 TO 1 | 1 | |
ALL 55TH | 3.54 TO 1 | 1 | |
ALL 55TH | 4.1 TO 1 | 1 | |
ALL 55TH | 3.9 TO 1 | 1 | |
ALL 55TH | 3.23 TO 1 | 1 | |
ALL 55TH | 3.07 TO 1 | 1 | |
12.0105 - BEARING-DIFF DRIVING PINION | |||
Part Number | Application | Note | QTY |
5540-60 | REAR 25 DEGREES | 1 | |
ALL 55TH | FRONT | 1 | |
5580 | REAR, 40 DEGREES | 1 | |
ALL 56TH | CONE, INNER | 1 | |
ALT-56TH | CUP, INNER | 1 | |
ALT-56TH | CONE, OUTER | 1 | |
ALL 56TH | CUP, OUTER | 1 | |
12.0107 - SHIM-DIFF DRIVING PINION BEARING ADJUSTING | |||
Part Number | Application | Note | QTY |
ALL 56TH | .003 INNER | 2 | |
ALL 56TH | .005 INNER | 2 | |
ALL 56TH | .010 INNER | 2 | |
ALL 56TH | .003 OUTER | 2 | |
ALL 56TH | .005 OUTER | 2 | |
ALL 56TH | .010 OUTER | 2 | |
ALL 56TH | .030 OUTER | 2 | |
12.011 - SLEEVE-DIFF DRIVING PINION BEARING | |||
Part Number | Application | Note | QTY |
5540-60-80 | 25 DEGREES | 1 | |
12.012 - OIL SEAL ASSEMBLY-DIFF DRIVING PINION BEARING FRONT | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
12.0123 - GASKET-DIFF DRIV PINION BEAR FRONT OIL SEAL | |||
Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
12.0125 - OIL SLINGER-DIFF DRIVING PINION | |||
Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
12.0161 - UNIVERSAL JOINT FLANGE-DIFF DRIVING PINIO | |||
Part Number | Application | Note | QTY |
5540-60 | USE WITH SPICER JT | 1 | |
ALL 55TH | WASHER | 1 | |
ALL 55TH | NUT 1-14 | 1 | |
5540-60 | ULTRAMATIC | 1 | |
5580 | ULTRAMATIC | 1 | |
5640-60-70 | ULTRAMATIC | 1 | |
5680-38 | ULTRAMATIC | 1 | |
ALL 56TH | WASHER 3/4 | 1 | |
ALL 56TH | NUT 3/4-16 | 1 | |
5640-60-70 | MANUAL SHIFT TRANS | 1 | |
12.0162 - DUST SHIELD-DIFF DRIVING PINION UNIV JT FLANGE | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
12.018 - PINION-DIFFERENTIAL (SIDE GEAR) | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | NOT USED POWER LOCK | 2 | |
12.019 - PIN-OIFF PINION | |||
Part Number | Application | Note | QTY |
ALL 55TH | LOCK PIN | 1 | |
ALL 55TH | - | 1 | |
ALL 56TH | NOT USED POWER LOCK | 1 | |
5680-38 | LOCK PIN, NOT USED POWER LOCK | 1 | |
5640-60-70 | LOCK PIN, NOT USED POWER LOCK | 1 | |
12.0194 - THRUST BLOCK-DIFF AXLE SHAFT | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
12.020 - THRUST WASHER-DIFF PINION | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | NOT USED POWER LOCK | 2 | |
12.021 - GEAR-DIFFERENTIAL (SIDE GEAR) | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | NOT USED POWER LOCK | 2 | |
12.0213 - KIT-DIFFERENTIAL SIDE GEAR AND PINION REPAIR | |||
Part Number | Application | Note | QTY |
5680-88 | NOT USED POWER LOCK | 1 | |
5680-88 | - | 1 | |
5640-60-70 | NOT USED POWER LOCK | 1 | |
5640-60-70 | - | 1 | |
12.022 - THRUST WASHER-DIFF GEAR | |||
Part Number | Application | Note | QTY |
ALL 55TH | .036 THICK | 2 | |
ALL 55TH | .041 THICK | 2 | |
ALL 55TH | .046 THICK | 2 | |
ALL 55TH | .031 THICK | 2 | |
ALL 56TH | NOT USED POWER LOCK | 2 | |
12.023 - CASE ASSEMBLY | |||
Part Number | Application | Note | QTY |
ALL 55TH | GASKET, LOCKNUT | 1 | |
ALL 55TH | PLUG 5/8-18 HEX | 2 | |
ALL 55TH | GASKET, PLUG | 2 | |
ALL 55TH | SET SCREW 1/2-20 X 1 1/4, TO CARRIER CAP STOP | 1 | |
ALL 55TH | LOCKNUT 1/2-20, SET SCREW | 1 | |
5540 | - | 1 | |
5580 | - | 1 | |
5540-60 | USE WITH TORSION LEVEL SUSPENSION | 1 | |
5680-88 | - | 1 | |
5640-(BODY-5622) | WITH CONVENTIONAL SPRINGS | 1 | |
5640-60-70 | - | 1 | |
ALL 56TH | SCREW 1/2-13 X 2 1/4, BEARING CAP | 4 | |
ALL 56TH | PLUG, 3/4 HDLESS SOCKET, DRAIN | 1 | |
12.0232 - COVER-CASE | |||
Part Number | Application | Note | QTY |
5680-88 | - | 1 | |
5640-60-70 | - | 1 | |
5680-88 | SCREW 3/8-16 X 5/8 | 9 | |
5640-60-70 | SCREW 5/16-18 X 5/8 | 9 | |
ALL 56TH | PLUG 3/4 SQ HD, FILLER | 1 | |
12.0234 - GASKET-CASE COVER | |||
Part Number | Application | Note | QTY |
5680-88 | - | 1 | |
5640-60-70 | - | 1 | |
12.0235 - CLIP-CASE BRAKE TUBE | |||
Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
12.029 - SHAFT | |||
Part Number | Application | Note | QTY |
5580 | WASHER 7/8 | 2 | |
5580 | NUT 7/8-14 | 2 | |
5540-60 | NUT 3/4-16 | 2 | |
5580 | - | 2 | |
5540-60 | - | 2 | |
5680-88 | - | 2 | |
5640-60-70 | - | 2 | |
5540-60 | WASHER 3/4 | 2 | |
5580 | COTTER PIN 3/16 X 1-3/4 | 2 | |
5540-60 | COTTER PIN 1/8 X 1-3/8 | 2 | |
12.0295 - BEARING-SHAFT | |||
Part Number | Application | Note | QTY |
5580 | - | 2 | |
5540-60 | - | 2 | |
ALL 56TH | - | 2 | |
12.030 - GUARD-SHAFT BEARING OIL | |||
Part Number | Application | Note | QTY |
5580 | - | 2 | |
5540-60 | - | 2 | |
12.031 - GASKET-SHAFT BEARING OIL GUARD | |||
Part Number | Application | Note | QTY |
5540-60 | - | 2 | |
5580 | - | 2 | |
12.0313 - OIL SEAL KIT-SHAFT | |||
Part Number | Application | Note | QTY |
5540-60 | 2 WHEEL | 1 | |
5540-60 | 2 WHEEL | 1 | |
5540-60 | 1 WHEEL | 2 | |
5540-60 | 1 WHEEL | 2 | |
5580 | 1 WHEEL | 2 | |
5580 | 1 WHEEL | 2 | |
5580 | 2 WHEEL | 1 | |
5580 | 2 WHEEL | 1 | |
12.0315 - OIL SEAL-SHAFT BEARING | |||
Part Number | Application | Note | QTY |
5540-60 | OUTER | 2 | |
5540-60 | INNER | 2 | |
5580 | INNER | 2 | |
5580 | OUTER | 2 | |
ALL 56TH | INNER | 2 | |
12.032 - RETAINER-SHAFT BEARING OIL SEAL | |||
Part Number | Application | Note | QTY |
5580 | - | 2 | |
12.033 - GASKET-SHAFT BEARING OIL SEAL RETAINER | |||
Part Number | Application | Note | QTY |
5580 | - | 2 | |
5540-60 | - | 2 | |
12.0332 - RETAINER-SHAFT BEARING | |||
Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
12.0333 - GASKET-SHAFT BEARING RETAINER | |||
Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
12.0334 - WASHER-SHAFT BEARING RETAINING | |||
Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
12.034 - SHIM-SHAFT BEARING | |||
Part Number | Application | Note | QTY |
5580 | .005 | X | |
5580 | .007 | X | |
5580 | .020 | X | |
5540-60 | .005 | X | |
5540-60 | .007 | X | |
5540-60 | .020 | X | |
5580 | - | 2 | |
5540-60 | - | 2 | |
12.0341 - SEAL-SHAFT NUT OIL | |||
Part Number | Application | Note | QTY |
5580 | - | 2 |