|
Keyword Search(Steering Wheel, Gasket, etc)
|
Group Number Search(3.686)
|
Part Number Search(450517)
|
|
|
|
|
1955-1956 - GROUP 15 - STEERING AND SUSPENSION
15.000 - ROD ASSEMBLY-STEER CONN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
15.001 - PLUG-ADJUSTING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
ALL 55TH; 56TH | COTTER PIN 1/8 X 1-5/8 | 2 | |
15.003 - SEAT-BALL | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 8 | |
15.0035 - PLUG-CROSS TUBE BALL SEAT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.004 - SPRING-BALL SEAT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.0045 - BUMPER-BALL SEAT SPRING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.0071 - LEVER-IDLER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5560-80; ALL 56TH | NUT 1/2-20, TO CONN ROD USE WITH BENDIX POWER STEERING | 1 | |
5560-80; ALL 56TH | COTTER PIN 3/32 X 7/8, TO CONN ROD, USE WITH BENDIX POWER STEERING | 1 | |
15.0072 - DUST COVER-BALL STUD | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | IDLER LEVER, USE WITH BENDIX POWER STEERING | 1 | |
5560-80; ALL 56TH | POWER CYLINDER, WITH BENDIX POWER STEERING | 1 | |
ALL 55TH; 56TH | - | 4 | |
5560-80; ALL 56TH | PITMAN ARM, USE WITH BENDIX POWER STEERING | 1 | |
15.0073 - SPRING-BALL STUD DUST COVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.0074 - BUSHING ASSEMBLY-IDLER LEVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | WASHER, RETAINING | 1 | |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
ALL 55TH; 56TH | NUT 7/16, RETAINING | 1 | |
15.00742 - SEAL-IDLER LEVER BUSHING | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
15.00746 - SUPPORT-IDLER LEVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | SCREW 3/8-24 X 3 1/4, TO FRAME | 2 | |
ALL 55TH; 56TH | - | 1 | |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
ALL 55TH; 56TH | LOCKNUT 3/8-24, TO FRAME | 2 | |
15.0075 - LUBRICATION FITTING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
15.009 - SPACER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | LEFT | 1 | |
15.200 - TUBE ASSEMBLY-STEERING CROSS | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | LEFT | 1 | |
5560-80; ALL 56TH | RIGHT, USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | LEFT, USE WITH MONROE POWER STEERING | 1 | |
5540-60; ALL 56TH | RIGHT, USE WITH MONROE POWER STEERING | 1 | |
5560-80; ALL 56TH | LEFT, USE WITH BENDIX POWER STEERING | 1 | |
ALL 55TH; 56TH | COTTER PIN 3/32 X 7/8 | 2 | |
15.2005 - TUBE-CROSS | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
5560-80; ALL 56TH | RIGHT, USE WITH BENDIX POWER STEERING | 1 | |
5560-80; ALL 56TH | LEFT, USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | RIGHT, USE WITH MONROE POWER STEERING | 1 | |
5540-60; ALL 56TH | LEFT, USE WITH MONROE POWER STEERING | 1 | |
15.20053 - PLUG-CROSS TUBE ADJUSTING | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | USE WITH MONROE POWER STEERING | 2 | |
5540-60; ALL 56TH | COTTER PIN, ADJ PLUG | 2 | |
15.2006 - NUT-BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
ALL 55TH; 56TH | USE WITH POWER STEERING | 4 | |
15.20063 - SEAT-CROSS TUBE BALL | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | WITH MONROE POWER STEERING | 2 | |
15.20065 - SPRING-CROSS TUBE BALL SEAT | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | WITH MONROE POWER STEERING | 2 | |
15.20067 - BUMPER-CROSS TUBE BALL SEAT SPRING | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | WITH MONROE POWER STEERING | 2 | |
15.2007 - LUBRICATOR FITTING-CROSS | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
ALL 55TH; 56TH | OUTER, USE WITH POWER STEERING | 2 | |
ALL 55TH; 56TH | INNER, USE WITH POWER STEERING | 2 | |
15.201 - CLAMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
ALL 55TH; 56TH | LOCKWASHER 5/16 | 4 | |
ALL 55TH; 56TH | NUT 5/16-24 | 4 | |
ALL 55TH; 56TH | SCREW 5/16-24 X 1-1/4 | 4 | |
15.202 - BALL AND SOCKET ASSEMBLY | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | LEFT | 1 | |
15.2025 - SLEEVE-ADJUSTING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.206 - DUST COVER-BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
5560-80; 5688 | INNER, USE WITH BENDIX POWER STEERING | 2 | |
15.3002 - STEERING COLUMN ASSEMBLY | |||
| Part Number | Application | Note | QTY |
ALL 55TH | POWER STEERING WITH ULTRAMATIC | 1 | |
ALL 55TH | STANDARD STEERING WITH ULTRAMATIC | 1 | |
5540-60 | POWER STEERING WITH STANDARD OR OD TRANSMISSION | 1 | |
5540-60 | STANDARD STEERING WITH STANDARD OR OD TRANSMISSION | 1 | |
ALL 56TH | NOT USED WITH POWER BUTTON TRANSMISSION | 1 | |
ALL 56TH | USED WITH PUSH BUTTON TRANSMISSION | 1 | |
15.3004 - ADAPTOR-STEERING COLUMN | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.3005 - NUT-STEERING COLUMN ADAPTOR | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.3006 - SEAL-STEERING COLUMN ADAPTOR | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.3007 - RETAINER-STEERING COLUMN ADAPTOR SEAL | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.301 - CLAMP ASSEMBLY-STEERING COLUMN | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
ALL 55TH | LOCKWASHER 5/16 | 1 | |
ALL 55TH | NUT 5/16-24 | 1 | |
ALL 55TH | SCREW 5/16-24 X 1-7/8 | 1 | |
15.302 - GROMMET-STEERING COLUMN TO DASH | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.3023 - GROMMET-STEERING COLUMN TO INSTRUMENT BOARD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
15.3025 - RETAINER-STEER-COLUMN TO INSTRUMENT BOARD GROMMET | |||
| Part Number | Application | Note | QTY |
5640-60-70 | - | 1 | |
5680-88 | - | 1 | |
ALL 56TH | SCREW #4-40 X 1/4 PAN HEAD | 2 | |
15.303 - BRACKET-COLUMN TO INSTRUMENT BOARD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | SCREW 5/16-24 X 1 | 2 | |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | LOCKWASHER 5/16 | 2 | |
ALL 55TH; 56TH | NUT, CLAMP BOLT | 1 | |
ALL 55TH; 56TH | BOLT, CLAMP | 1 | |
ALL 55TH; 56TH | LOCKWASHER, CLAMP BOLT | 1 | |
15.3047 - TAPPING PLATE-STEERING COLUMN BRACKET | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.3049 - ANTI-SQUEAK STEERING COLUMN BRKT TAPPING PLATE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.3072 - BRACE-INSTRUMENT BOARD TO COWL | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | SCREW 5/16-18 X 3/4 | 4 | |
ALL 55TH; 56TH | WASHER 11/32 | 4 | |
ALL 55TH; 56TH | LOCKWASHER 5/16 | 4 | |
15.3074 - INSULATION-COLUMN TO DASH | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.310 - STEERING GEAR ASSEMBLY | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | WASHER 7/16, TO FRAME BOLT | 3 | |
5540-60 | USE WITH POWER STEERING | 1 | |
5580 | USE WITH POWER STEERING | 1 | |
ALL 55TH | - | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
ALL 56TH | - | 1 | |
ALL 55TH; 56TH | LOCKWASHER 7/16 | 3 | |
ALL 55TH; 56TH | BOLT 7/16-14 X 3, TO FRAME | 3 | |
15.313 - CASE ASSEMBLY-STEERING GEAR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | OIL PLUG | 1 | |
5540-60 | USE WITH POWER STEERING | 1 | |
5580 | USE WITH POWER STEERING | 1 | |
ALL 55TH | - | 1 | |
15.314 - COVER ASSY-CROSS SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | SCREW 5/16-18 X 5/8 | 4 | |
5540-60 | USE WITH POWER STEERING | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
15.315 - GASKET-CROSS SHAFT COVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
5540-60; ALL 56TH | USE WITH POWER STEERING | 1 | |
15.316 - COVER ASSEMBLY-WORM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | SCREW 5/16-18 X3/4 | 4 | |
5540-60; ALL 56TH | SCREW 5/16-18 X5/8 | 4 | |
5540-60; ALL 56TH | USE WITH POWER STEERING | 1 | |
ALL 55TH | - | 1 | |
15.317 - SHIM-WORM COVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | MEDIUM | X | |
ALL 55TH; 56TH | THICK | X | |
ALL 55TH; 56TH | THIN | X | |
5540-60; ALL 56TH | THIN, USE WITH POWER STEERING | X | |
5540-60; ALL 56TH | THICK, USE WITH POWER STEERING | X | |
5540-60; ALL 56TH | MEDIUM, USE WITH POWER STEERING | X | |
15.318 - SHAFT ASSEMBLY-CROSS | |||
| Part Number | Application | Note | QTY |
5540-60 | USE WITH POWER STEERING | 1 | |
5580 | USE WITH POWER STEERING | 1 | |
ALL 55TH; 56TH | - | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
15.3184 - SCREW-CROSS SHAFT ADJ | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH | NUT | 1 | |
ALL 55TH | LOCK PLATE | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
ALL 56TH | NUT | 1 | |
15.3185 - THRUST WASHER-CROSS SHAFT ADJ SCREW | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
15.320 - BUSHING-CROSS SHAFT | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | - | 2 | |
15.3203 - BEARING ASSEMBLY-CROSS SHAFT | |||
| Part Number | Application | Note | QTY |
5580 | USE WITH POWER STEERING | 2 | |
15.321 - PITMAN ARM-STEERING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | NUT | 1 | |
ALL 55TH; 56TH | - | 1 | |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | USE WITH MONROE POWER STEERING | 1 | |
5560-80; ALL 56TH | NUT 1/2-20, USE WITH BENDIX POWER STEERING | 1 | |
ALL 55TH; 56TH | LOCKWASHER 7/8 | 1 | |
5560-80; ALL 56TH | COTTER PIN 3/32 X7/8, WITH BENDIX POWER STEERING | 1 | |
15.3225 - OIL SEAL ASSEMBLY-CROSS SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.3282 - SHAFT ASSEMBLY-STEERING GEAR (UPPER) | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.3283 - SHAFT AND FLANGE-STEERING GEAR (UPPER) | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.3284 - COUPLING-STEERING GEAR SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 56TH | BOLT, LARGE | 1 | |
ALL 56TH-t | BOLT, SMALL | 1 | |
ALL 56TH | BOLT 5/16-24 X 1 | 2 | |
ALL 56TH | - | 1 | |
ALL 56TH | LOCKWASHER 5/16 | 4 | |
ALL 56TH | NUT 5/16-24 | 4 | |
15.3286 - REINFORCEMENT-STEERING GEAR SHAFT COUPLING | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 4 | |
15.3288 - CABLE ASSEMBLY-STEERING GEAR SHAFT GROUND | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.329 - SHAFT AND WORM ASSEMBLY (LOWER) | |||
| Part Number | Application | Note | QTY |
5540-60 | USE WITH POWER STEERING | 1 | |
5580 | USE WITH POWER STEERING | 1 | |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
15.3293 - FLANGE-STEERING GEAR LOWER SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 56TH | PIN 1 1/8 LONG | 1 | |
ALL 56TH | - | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
15.3295 - BEARING ASSEMBLY-SHAFT UPPER | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
15.3296 - SPACER-SHAFT UPPER BEARING | |||
| Part Number | Application | Note | QTY |
- | ALL 56TH | WASHER | 1 |
- | - | 1 | |
ALL 55TH; 56TH | - | 1 | |
15.3301 - SPRING-SHAFT UPPER BRG RETAINING | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
15.3305 - OIL SEAL-SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 1 | |
15.3306 - WASHER-SHAFT FELT | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | USE WITH POWER STEERING | 1 | |
15.3315 - CUP-WORM BEARING ADJUSTING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
5540-60; ALL 56TH | USE WITH POWER STEERING | 1 | |
15.3316 - CAGE & ROLLER-WORM BRG | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
5540-60; ALL 56TH | USE WITH POWER STEERING | 1 | |
15.3317 - CUP-WORM BEARING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
5540-60; ALL 56TH | USE WITH POWER STEERING | 1 | |
15.333 - STEERING WHEEL ASSEMBLY | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | NUT 3/4 | 1 | |
5540-60 | SPECIFY TRIM SET NO | 1 | |
5580 | SPECIFY TRIM SET NO | 1 | |
5640-60 | SPECIFY TRIM SET NO | 1 | |
5670-80-88 | SPECIFY TRIM SET NO | 1 | |
15.400 - KNUCKLE ASSEMBLY-STEERING | |||
| Part Number | Application | Note | QTY |
5580-(BODIES-5582-87); 5680 | - | 2 | |
5580; 5680-88 | USE WITH POWER STEERING | 2 | |
5540-60 | - | 2 | |
5540-60 | USE WITH POWER STEERING | 2 | |
5640-60-70 | - | 2 | |
5640-60-70 | USE WITH POWER STEERING | 2 | |
15.401 - ADJUSTING NUT-WHEEL BEARING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | COTTER PIN 1/8 X 1-1/4 | 2 | |
ALL 55TH; 56TH | 3/4-16 | 2 | |
15.402 - LOCKING WASHER-FRONT WHEEL BEARING ADJUSTING NUT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.404 - BEARING ASSEMBLY-FRONT WHEEL | |||
| Part Number | Application | Note | QTY |
5580; 5680-88 | INBOARD | 2 | |
5580; 5680-88 | OUTBOARD | 2 | |
5540-60 | INBOARD | 2 | |
5540-60 | OUTBOARD | 2 | |
5640-60 | CONE, OUTBOARD | 2 | |
5640-60 | CUP, OUTBOARD | 2 | |
5640-60 | CONE, INBOARD | 2 | |
5640-60 | CUP, INBOARD | 2 | |
15.4045 - GASKET-STEERING KNUCKLE TO SUPPORT PLATE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.406 - LEVER-KNUCKLE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LEFT | 1 | |
ALL 55TH; 56TH | RIGHT | 1 | |
15.4065 - LUBRICATION FITTING-KNUCKLE PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.4071 - OIL GUARD | |||
| Part Number | Application | Note | QTY |
5580; 5680-88 | - | 2 | |
5540-60; 5640-60-70 | - | 2 | |
15.4072 - GASKET-OIL GUARD | |||
| Part Number | Application | Note | QTY |
5580-5680-88 | - | 2 | |
5540-60; 5640-60-70 | - | 2 | |
15.408 - PIN KIT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL-55TH; 56TH | - | 1 | |
15.4081 - PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.4085 - BEARING-PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | UPPER | 2 | |
ALL 55TH; 56TH | USE WITH POWER STEERING | 4 | |
15.409 - BUSHING-PIN LOWER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.4095 - PIN-PIN LOCK | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.4105 - PLUG-PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.411 - SHIM-PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | .062 | X | |
ALL 55TH; 56TH | .071 | X | |
ALL 55TH; 56TH | .068 | X | |
ALL 55TH; 56TH | .065 | X | |
ALL 55TH; 56TH | .059 | X | |
ALL 55TH; 56TH | .056 | X | |
ALL 55TH; 56TH | .053 | X | |
ALL 55TH; 56TH | .054 | X | |
ALL 55TH; 56TH | .057 | X | |
ALL 55TH; 56TH | .058 | X | |
ALL 55TH; 56TH | .060 | X | |
ALL 55TH; 56TH | .061 | X | |
ALL 55TH; 56TH | .063 | X | |
ALL 55TH; 56TH | .064 | X | |
ALL 55TH; 56TH | .066 | X | |
ALL 55TH; 56TH | .067 | X | |
ALL 55TH; 56TH | .069 | X | |
ALL 55TH; 56TH | .070 | X | |
ALL 55TH; 56TH | .072 | X | |
ALL 55TH; 56TH | .055 | X | |
15.4115 - SPACER-KNUCKLE TO SUPPORT PLATE | |||
| Part Number | Application | Note | QTY |
5580; 5680-88 | - | 4 | |
5540-60; 5640-60-70 | - | 4 | |
15.412 - THRUST BEARING-PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.501 - SUPPORT-KNUCKLE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | SCREW 7/16-20 X 2 | 2 | |
ALL 55TH; 56TH | LEFT | 1 | |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | LOCKWASHER 7/16 | 2 | |
15.502 - ARM ASSEMBLY-SUPPORT | |||
| Part Number | Application | Note | QTY |
5540-60-80; ALL 56TH | UPPER | 2 | |
5540; 5640-(BODY-5622) | UPPER, USE WITH CONVENTIONAL SPRINGS | 2 | |
5560-80; ALL 56TH | BOLT 7/16-20 X 1 27/32, TO FRAME 4 | 4 | |
5540-60-80 | LOWER, LEFT | 1 | |
5540-60-80 | LOWER, RIGHT | 1 | |
5540; 5640-(BODY-5622) | LOWER, USE WITH CONVENTIONAL SPRINGS | 2 | |
5560-80 | BOLT 7/16-20 X 1 1/2, TO FRAME | 4 | |
ALL 56TH | LOWER LEFT | 2 | |
ALL 56TH | LOWER RIGHT | 2 | |
5560-80 | NUT 7/16-20, HUGLOCK | 8 | |
15.5035 - BUSHING ASSY-SUPPORT ARM INNER | |||
| Part Number | Application | Note | QTY |
5540; 5640-(BODY-5622) | LESS OILER, UPPER ARM WITH CONVENTIONAL SPRINGS | 4 | |
5540; 5640-(BODY-5622) | INCLUDES OILER, LOWER ARM WITH CONVENTIONAL SPRINGS | 4 | |
5540-60-80; ALL 56TH | UPPER ARM | 4 | |
5560-80; ALL 56TH | 5/8 WASHER | 8 | |
5540-60-80; ALL 56TH | LOWER ARM | 4 | |
5560-80; ALL 56TH | 3/4 WASHER | 8 | |
5560-80; ALL 56TH | LOCKNUT 5/8-18 | 4 | |
15.5036 - BRACKET-SUPPORT ARM INNER BUSHING | |||
| Part Number | Application | Note | QTY |
5540; 5640-(BODY-5622) | LOWER, WITH CONVENTIONAL SPRINGS | 2 | |
5540-60-80; ALL 56TH | UPPER | 2 | |
5540; ALL 56TH | BOLT 7/16-20 X 1 1/2, LOWE | 8 | |
5540; 5640-(BODY-5622) | UPPER, WITH CONVENTIONALSPRIN | 2 | |
ALL 55TH; 56TH | BOLT 9/16-18 X 1 3/4, UPPER BRACKET | 4 | |
5540; ALL 56TH | NUT 7/16-20, HUGLOCK | 8 | |
15.50363 - OILER-SUPPORT ARM INNER BUSHING | |||
| Part Number | Application | Note | QTY |
5540; 5640 | 90 DEGREES, UPPER ARM | 4 | |
15.5037 - SEAL-SUPPORT ARM INNER BUSHING | |||
| Part Number | Application | Note | QTY |
5540; 5640 | LOWER ARM | 4 | |
5540; 5640 | UPPER ARM | 4 | |
15.5132 - PIVOT PIN-SUPPORT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | NUT, LOWER PIN | 2 | |
ALL 55TH; 56TH | LOCKWASHER, LOWER PIN | 4 | |
ALL 55TH; 56TH | NUT, UPPER PIN | 2 | |
ALL 55TH; 56TH | LOCKWASHER, UPPER PIN | 2 | |
ALL 55TH; 56TH | LOWER | 2 | |
to-ALL 55TH; 56TH | UPPER | 2 | |
15.5133 - ECCENTRIC-SUPPORT PIVOT PIN UPPER | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
15.5135 - BUSHING-SUPT PIVOT PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LOWER PIN | 2 | |
15.5136 - SEAL-SUPPORT PIVOT PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LOWER PIN | 4 | |
ALL 55TH; 56TH | UPPER PIN | 4 | |
15.5137 - LUBRICATION FITTING-SUPT PIVOT PIN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LOWER PIN | 4 | |
ALL 55TH; 56TH | UPPER PIN | 2 | |
15.610 - VALVE ASSEMBLY-CONTROL | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
5540-60; ALL 56TH | INCLUDES CYLINDER, MONROE | 1 | |
15.611 - PLUG-CONTROL VALVE ADJUSTING | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
5540-60; ALL 56TH | COTTER PIN | 1 | |
15.6113 - O RING-CONTROL VALVE ADJUSTING PLUG | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.613 - REPAIR KIT-CONTROL VALVE HOUSING & SPOOL | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
5560-80; ALL-56TH | BENDIX | 1 | |
15.6132 - CAP-CONTROL VALVE | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
5560-80; ALL 56TH | LOCKWASHER 5/16 | 2 | |
5560-80; ALL 56TH | BOLT 5/16-18 X 5/8 | 2 | |
15.614 - GASKET-CONTROL VALVE CAP | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.616 - BALL STUD-CONTROL VALVE TO PITMAN ARM | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.619 - LUBRICATOR FITTING-CONTROL VALVE TO PITMAN ARM BALL STUD | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.620 - PISTON-CONTROL VALVE REACTION | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | OUTER, MONROE | 1 | |
5540-60; ALL 56TH | INNER, MONROE | 1 | |
15.6202 - O RING-CONTROL VALVE REACTION PISTON | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | OUTER, MONROE | 1 | |
5540-60; ALL 56TH | INNER, MONROE | 1 | |
15.6204 - SPRING-CONTROL VALVE REACTION PISTON | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.621 - HOSE ASSEMBLY-CONTROL VALVE TO POWER CYLINDER | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | SHORT, USE WITHBENDIX POWER STEERING | 1 | |
5560-80; ALL 56TH | LONG, USEWITHBENDIX POWER STEERING | 1 | |
15.624 - VALVE ASSEMBLY-CONTROL VALVE RELIEF | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.625 - SEAL KIT-CONTROL VALVE | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
5540-60; ALL | MONROE | 1 | |
15.627 - SLEEVE ASSEMBLY-CONTROL VALVE | |||
| Part Number | Application | Note | QTY |
55-60-80; ALL 56TH | BENDIX | 1 | |
5560-30; ALL 56TH | BOLT 3/8-16 X 2 1/4 TO HOUSING | 2 | |
5560-80; ALL 56TH | LOCKWASHER 3/8 | 2 | |
15.630 - CLAMP-CONTROL VALVE SLEEVE | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
5560-80; ALL 56TH | BOLT 3/8-24 X 1 7/8 | 1 | |
5560-80; ALL 56TH | LOCKWASHER 3/8 | 1 | |
5560-80; ALL 56TH | NUT 3/8-24 | 1 | |
15.633 - TUBE-CONTROL VALVE SOCKET | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.636 - SEAT-CONTROL VALVE SOCKET TUBE BALL | |||
| Part Number | Application | Note | QTY |
5560-30; ALL 56TH | BENDIX | 2 | |
15.639 - SPRING-CONTROL VALVE SOCKET TUBE BALL SEAT | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.640 - STOP-CONTROL VALVE SOCKET TUBE BALL SEAT SPRING | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.642 - SPACER-CONTROL VALVE CENTER | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.643 - HOUSING-CONTROL VALVE CENTER SPACER | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.644 - PLUG-CONTROL VALVE SPOOL ADJUSTING | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | MONROE | 1 | |
15.6443 - O RING-CONTROL VALVE SPOOL ADJUSTING PLUG | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | MONROE | 1 | |
15.645 - BOLT-CONTROL VALVE SPOOL | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | WASHER | 1 | |
5560-80; ALL 56TH | BENDIX | 1 | |
5560-80; ALL 56TH | NUT | 1 | |
15.648 - BUSHING-CONTROL VALVE SPOOL | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | LARGE, BENDIX | 1 | |
5560-80; ALL 56TH | SMALL, BENDIX | 1 | |
15.649 - O RING-CONTROL VALVE SPOOL | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.651 - PACKING KIT-CONTROL VALVE SPOOL | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
5560-80; ALL-56TH | BENDIX | 1 | |
15.657 - SCREW-CONTROL VALVE STOP | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.658 - PIN-CONTROL VALVE STOP SCREW LOCK | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.6581 - STUD KIT-CONTROL VALVE | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
5540-60; ALL-56TH | MONROE | 1 | |
15.6582 - STUD-CONTROL VALVE | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
5540-60; ALL 56TH | WASHER | 2 | |
5540-60; ALL 56TH | NUT 5/8-18 | 1 | |
5540-60; ALL 56TH | ROLL PIN | 1 | |
5540-60; ALL 56TH | NUT 1/2-20 | 1 | |
15.6583 - BALL-CONTROL VALVE STUD | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.6584 - SEAT-CONTROL VALVE STUD BALL | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | INNER, MONROE | 1 | |
5540-60; ALL 56TH | OUTER, MONROE | 1 | |
15.6585 - SPRING-CONTROL VALVE STUD BALL SEAT | |||
| Part Number | Application | Note | QTY |
5540-60:-ALL 56TH | MONROE | 1 | |
15.6586 - BUSHING-CONTROL VALVE STUD | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.6587 - CUSHION-CONTROL VALVE STUD | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.6588 - RETAINER-CONTROL VALVE STUD CUSHION | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.6589 - WASHER-CONTROL VALVE STUD CUSHION | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.659 - SEAT-CONTROL TUBE VALVE | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | SMALL, BENDIX | 3 | |
5560-80; ALL | LARGE, BENDIX | 1 | |
15.710 - CYLINDER ASSEMBLY-POWER | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | INCLUDES CONTROL VALVE, MONROE | 1 | |
5560-80; ALL 56TH | NUT 1/2-20, STUD, BENDIX | 1 | |
ALL 55TH; 56TH | COTTER PIN 3/32 X 7/8 | 1 | |
5540-60 | NUT 1/2-20, TO FRAME BRACKET, MONROE | 1 | |
15.7103 - DUST COVER-CYLINDER ASSEMBLY BALL STUD | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.7105 - PLUG-CYLINDER END | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | 1 15/16-16, MONROE | 1 | |
15.7107 - TUBE-CYLINDER INNER | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.716 - LUBRICATOR FITTING-CYLINDER BAI 1 STUD | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
15.719 - BRACKET-CYLINDER | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | TO FRAME, MONROE | 1 | |
5560-80; ALL 56TH | TO FRAME, USE WITH BENDIX POWER STEERING | 1 | |
5560-80; ALL 56TH | LOCKWASHER 7/16 | 3 | |
5560-80; ALL 56TH | BOLT 7/16-20 X 1-3/8, BENDIX | 3 | |
5540-60; ALL 56TH | SCREW 3/8-24 X 2 3/4, MONROE | 2 | |
5540-60; ALL 56TH | SCREW 3/8-24 X 3 1/4, MONROE | 1 | |
5540-60; ALL 56TH | NUT 3/8-24 | 3 | |
15.720 - BUSHING-CYLINDER BRACKET | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | TO FRAME, USE WITH BENDIX POWER STEERING | 2 | |
5560-80; ALL56TH | WASHER, OUTER | 1 | |
5560-80; ALL56TH | WASHER, INNER | 1 | |
5560-80; ALL56TH | COTTER PIN 3/32 X 7/8 | 1 | |
5560-80; ALL56TH | NUT 7/16-20 | 1 | |
15.721 - GROMMET KIT-CYLINDER TO FRAME BRACKET | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
5540-60; ALL-56TH | MONROE | 1 | |
15.7213 - GROMMET-CYLINDER TO FRAME BRACKET | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.7215 - GUIDE-CYLINDER TO FRAME BRACKET GROMMET | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.7217 - WASHER-CYLINDER TO FRAME BRACKET GROMMET | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 2 | |
15.726 - RING-CYLINDER RISTON | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.727 - ROD ASSEMBLY-CYLINDER PISTON | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.729 - GUIDE ASSEMBLY-CYLINDER PISTON ROD | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.7293 - O RING-CYLINDER PISTON ROD GUIDE | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.7295 - RETAINER-CYLINDER PISTON ROD GUIDE O RING | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.731 - SEAL KIT-CYLINDER PISTON ROD | |||
| Part Number | Application | Note | QTY |
5540-60; ALL | MONROE | 1 | |
5540-60; ALL-56TH | MONROE | 1 | |
15.735 - RING-CYLINDER PISTON ROD WIPING | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.736 - RETAINER-CYLINDER PISTON ROD WIPING RING | |||
| Part Number | Application | Note | QTY |
5540-60; ALL | MONROE | 1 | |
15.7362 - SEAL KIT-CYLINDER | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | BENDIX | 1 | |
5560-80; ALL-56TH | BENDIX | 1 | |
15.7363 - SEAL ASSEMBLY-CYLINDER | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.7365 - RETAINER-CYLINDER SEAL | |||
| Part Number | Application | Note | QTY |
5540-60; ALL 56TH | MONROE | 1 | |
15.810 - PUMP AND RESERVOIR ASSEMBLY | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | USE WITH MONROE POWER STEERING | 1 | |
ALL 55TH; 56TH | SCREW 3/8-16 X 1, ADJUSTING | 1 | |
ALL 55TH; 56TH | WASHER 3/8 ADJ | 1 | |
ALL 55TH; 56TH | LOCKWASHER 3/8 | 1 | |
ALL 55TH; 56TH | LOCKWASHER | 2 | |
ALL 55TH; 56TH | SCREW 5/16-18 X 3/4, RESERVOIR TO PUMP | 2 | |
ALL 55TH; 56TH | BOLT 3/8-16 X 7/8 | 1 | |
15.813 - BODY AND COVER ASSEMBLY-PUMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | DOWEL PIN 5/16 X 3/4 | 2 | |
ALL 55TH; 56TH | SCREW 3/8-16 X 2 | 3 | |
ALL 55TH; 56TH | LOCKWASHER 3/8 | 5 | |
ALL 55TH; 56TH | SCREW 3/8-16 X 1 3/4 | 2 | |
15.816 - GASKET-PUMP BODY COVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.819 - RETAINER-PUMP BODY BY-PASS PACKING RING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.822 - BRACKET ASSEMBLY-PUMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.825 - BELT-PUMP DRIVE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.828 - SHAFT-PUMP DRIVE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.831 - BEARING-PUMP DRIVE SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.834 - RING-PUMP DRIVE SHAFT BEARING RETAINING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.837 - OIL SEAL-PUMP DRIVE SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.840 - SPRING-PUMP FLOW CONTROL VALVE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.843 - KIT-PUMP GASKET | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL-55TH; 56TH | - | 1 | |
15.844 - ORIFICE-PUMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | USE WITH MONROE POWER STEERING | 1 | |
15.846 - HOSE ASSEMBLY-PUMP RETURN | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | CONNECTOR, ON PUMP | 1 | |
ALL 55TH; 56TH | CONTROL VALVE TO PUMP | 1 | |
15.847 - TUBE ASSEMBLY-PUMP (RETURN) HOSE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | TO CONTROL VALVE | 1 | |
ALL 55TH; 56TH | TO PUMP | 1 | |
15.849 - HOSE ASSEMBLY-PUMP PRESSURE | |||
| Part Number | Application | Note | QTY |
5560-88; ALL 56TH | PUMP TO CONTROL VALVE, USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL | PUMP TO CONTROL VALVE, USE WITH MONROE POWER STEERING | 1 | |
15.850 - CLAMP-PUMP PRESSURE & RETURN HOSE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | TO FRAME | 1 | |
5540; 5640-(BODY-5622) | SCREW 5/16-24 X 2 3/4, TO FRAME, USE WITH MONROE POWER STEERING WITH CONVENTIONAL SPRINGS | 2 | |
ALL 55TH; 56TH | TO AIR DUCT | 1 | |
5540 | SCREW 5/16-24 X 5/8, USE WITH POWER BRAKE, TO FRAME | 2 | |
5560-80; ALL 56TH | SCREW 5/16-24 X 5/8, TO FRAME | 2 | |
15.851 - GROMMET-PUMP PRESSURE & RETURN HOSE CLAMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | TO AIR DUCT | 1 | |
ALL 55TH; 56TH | TO FRAME | 1 | |
15.8512 - RETAINER-PUMP PRESSURE & RETURN HOSE CLAMP GROMMET | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | TO FRAME | 1 | |
15.8514 - SPACER-PUMP PRESSURE & RETURN HOSE CLAMP | |||
| Part Number | Application | Note | QTY |
5540; 5640-(BODY-5622) | LONG, TO FRAME, USE WITH MONROE POWER STEERING WITH CONVENTIONAL SPRINGS | 2 | |
5540 | SHORT, TO FRAME, USE WITH MONROE POWER STEERING | 1 | |
15.852 - CAP-PUMP HOSE ADAPTER VALVE | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | USE WITH MONROE POWER STEERING | 1 | |
15.855 - CLAMP-PUMP 56THHOSE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; | CONTROL VALVE TO PUMP HOSE | 2 | |
15.858 - CLIP-PUMP HOSE | |||
| Part Number | Application | Note | QTY |
ALL 56TH | STRAP CLAMP | 2 | |
ALL 56TH | NUT 1/4-28 | 1 | |
ALL 55TH; 56TH | PRESSURE AND RETURN | 2 | |
ALL 55TH | WASHER 9/32 | 1 | |
ALL 56TH | BOLT 1/4-28 X | 1 | |
ALL 55TH | SCREW 1/4-28 X 1 1/4 | 1 | |
15.864 - PULLEY-PUMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | KEY, TO POWER PUMP | 1 | |
ALL 55TH; 56TH | DRIVEN, ON POWER PUMP | 1 | |
ALL 55TH; 56TH | DRIVING, ON VIBRATION DAMPER | 1 | |
ALL 55TH; 56TH | WASHER 5/16 | 1 | |
ALL 55TH; 56TH | LOCKWASHER 5/16 | 1 | |
ALL 55TH; 56TH | BOLT 5/16-18 X 3/4, TOPOWER PUMP | 1 | |
15.867 - SPRING-PUMP RELIEF VALVE | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | USE WITH MONROE POWER STEERING | 1 | |
ALL 55TH; 56TH | RETAINING RING | 1 | |
15.872 - COVER-PUMP RESERVOIR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | SPEEDNUT | 1 | |
ALL 55TH; 56TH | GASKET | 1 | |
ALL 55TH; 56TH | SCREW 5/16-18 X 2 1/2 | 1 | |
ALL 55TH; 56TH | WASHER | 1 | |
15.873 - GASKET-PUMP RESERVOIR COVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.874 - CAP ASSEMBLY-RESERVOIR COVER FILLER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.880 - ELEMENT-PUMP RESERVOIR FILTER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.881 - CAP-PUMP RESERVOIR FILTER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.882 - SPRING-PUMP RESERVOIR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.889 - STUD-PUMP RESERVOIR MOUNTING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.892 - ROTOR SET-PUMP | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL-55TH; 56TH | - | 1 | |
15.895 - PIN-PUMP INNER ROTOR DRIVE | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.898 - VALVE ASSEMBLY-PUMP | |||
| Part Number | Application | Note | QTY |
5560-80; ALL 56TH | USE WITH BENDIX POWER STEERING | 1 | |
5540-60; ALL 56TH | USE WITH MONROE POWER STEERING | 1 | |
15.905 - COMPENSATOR ASSEMBLY | |||
| Part Number | Application | Note | QTY |
ALL 55TH | SEE PLATE 32 FOR DETAILS | 1 | |
ALL 56TH | SEE PLATE 32A FOR DETAILS | 1 | |
ALL 55TH; 56TH | WASHER 13/32 X 13/16 | 2 | |
ALL 55TH; 56TH | NUT 3/8-24 | 2 | |
ALL 55TH; 56TH | SCREW 3/8-24 X 1 5/8, MOUNTING | 1 | |
ALL 55TH; 56TH | SCREW 3/8-24 X 1 3/4 | 1 | |
15.906 - LUBRICANT-COMPENSATOR CASE & LOAD ARM LINK | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | 1 LB CAN | X | |
15.907 - ROD-COMPENSATOR CONTROL | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | SHORT | 1 | |
ALL 55TH; 56TH | LONG | 1 | |
ALL 55TH; 56TH | LOCKWASHER 1/4 | 2 | |
ALL 55TH; 56TH | NUT 1/4-28 | 2 | |
ALL 55TH; 56TH | WASHER 17/64 | 2 | |
15.908 - GROMMET-COMPENSATOR CONTROL ROD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.910 - SLEEVE-COMPENSATOR CONTROL ROD GROMMET | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.912 - LEVER-COMPENSATOR CONTROL ROD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.914 - CLAMP-COMPENSATOR CONTROL ROD LEVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | NUT 1/4-28 | 1 | |
ALL 55TH; 56TH | LOCKWASHER 1/4 | 1 | |
ALL 55TH; 56TH | SCREW 1/4-28 X 3/4 | 1 | |
15.915 - TURNBUCKLE-COMPENSATOR CONTROL ROD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | NUT 1/4-28, LH THD | 1 | |
ALL 55TH; 56TH | NUT 1/4-28, RH THD | 1 | |
15.916 - HOUSING ASSEMBLY-COMPENSATOR LOWER | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
ALL 55TH; 56TH | PLUG 1/8, PIPE | 1 | |
15.918 - HOUSING ASSEMBLY-COMPENSATOR UPPER | |||
| Part Number | Application | Note | QTY |
ALL 55TH;56TH | - | 1 | |
ALL 55TH;56TH | PLUG, EXPANSION | 1 | |
ALL 55TH;56TH | NUT 1/4-28 | 7 | |
ALL 55TH;56TH | LOCKWASHER 1/4 | 7 | |
ALL 55TH;56TH | SCREW 1/4-28 X 2 1/4, TOLOWER HOUSING | 4 | |
ALL 55TH;56TH | SCREW 1/4-28 X 3, TO LOWER HOUSING | 3 | |
15.920 - VALVE-COMPENSATOR UPPER HOUSING RELIEF | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.921 - BUSHING-COMPENSATOR HOUSING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LOWER HOUSING | 1 | |
ALL 55TH; 56TH | UPPER HOUSING | 1 | |
15.922 - LEVER ASSEMBLY-COMPENSATOR | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
15.923 - SEAL-COMPENSATOR LEVER BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
ALL 55TH | - | 2 | |
15.925 - SCREW-COMPENSATOR LEVER BALL STUD RETAINING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.927 - SEAT-COMPENSATOR LEVER BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.929 - SPRING WASHER-COMPENSATOR LEVER BALL STUD SEAT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.931 - SEAL-COMPENSATOR LEVER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.932 - LINK-COMPENSATOR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LEFT | 1 | |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | LUBRICATOR FITTING, STRAIGHT | 3 | |
ALL 55TH; 56TH | LUBRICATOR FITTING, ELBOW | 1 | |
15.933 - LEVER ASSEMBLY-COMPENSATOR LI INK | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LEFT | 1 | |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | LOCKNUT 7/16-20 | 2 | |
ALL 55TH; 56TH | BOLT 7/16-20 X 1 5/8, CLAMP | 2 | |
15.934 - SCREW-COMPENSATOR LINK LEVER BALL STUD RETAINING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.936 - SEAL-COMPENSATOR LINK LEVER BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
ALL 55TH | - | 2 | |
15.938 - SEAT-COMPENSATOR LINK LEVER BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.939 - SPRING WASHER-COMPENSATOR LINK LEVER BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.941 - PINION-COMPENSATOR PLANETARY | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | 1ST STAGE | 3 | |
ALL 55TH; 56TH | 2ND STAGE | 3 | |
15.942 - CARRIER ASSEMBLY-COMPENSATOR PLANETARY PINION | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | 1ST STAGE | 1 | |
ALL 55TH | 2ND STAGE | 1 | |
ALL 56TH | 2ND STAGE | 1 | |
15.946 - SPACER-COMPENSATOR PLANETARY PINION | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | 1ST STAGE | 3 | |
15.947 - RING GEAR-COMPENSATOR | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
15.948 - SHAFT & SUPPORT ASSEMBLY-COMPENSATOR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | RETAINING RING, SHAFT | 1 | |
ALL 55TH | - | 1 | |
ALL 56TH | - | 1 | |
ALL 55TH; 56TH | WASHER 13/32 X 13/16 | 1 | |
ALL 55TH; 56TH | SCREW 3/8-24 X 3/4, TO FRAME | 2 | |
ALL 55TH; 56TH | LOCKNUT 3/8-24 | 2 | |
5580-(BODY-5588); 5688 | SCREW 3/8 X 1, TO JUNCTION PLATE | 1 | |
15.949 - THRUST WASHER-COMPENSATOR SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.950 - SHIELD-COMPENSATOR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | SCREW 3/8-24 X 3/4 | 1 | |
ALL 55TH; 56TH | LOCKNUT 3/8-24 | 1 | |
15.951 - SUN GEAR-COMPENSATOR | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | 1ST STAGE | 1 | |
ALL 55TH; 56TH | 2ND STAGE | 1 | |
15.953 - GEAR-COMPENSATOR WORM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.954 - SHAFT-COMPENSATOR WORM | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 1 | |
ALL 55TH; 56TH | RETAINING RING | 1 | |
ALL 56TH | - | 1 | |
15.955 - BEARING-COMPENSATOR WORM SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
ALL 55TH; 56TH | RETAINER | 1 | |
15.957 - OIL SEAL-COMPENSATOR WORM SHAFT | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 1 | |
15.959 - ARM ASSEMBLY-FRONT LOAD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 55TH; 56TH | WASHER 7/8 | 6 | |
ALL 55TH; 56TH | RETAINING RING | 2 | |
ALL 56TH | - | 2 | |
15.960 - BALL STUD-FRONT LOAD ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
15.961 - SEAL-FRONT LOAD ARM BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 55TH | RETAINER | 2 | |
15.962 - SEAT-FRONT LOAD ARM BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
15.963 - BEARING-FRONT LOAD ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.965 - SEAL-FRONT LOAD ARM BEARING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | SMALL | 2 | |
ALL 55TH; 56TH | LARGE | 2 | |
15.967 - BRACKET ASSEMBLY-FRONT LOAD ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | LEFT | 1 | |
ALL 55TH; 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | SCREW 3/8-24 X 1 1/4 | 4 | |
ALL 55TH; 56TH | NUT 3/8-24, HUGLOCK | 4 | |
ALL 55TH | LUBRICATOR FITTING | 2 | |
ALL 56TH | LUBRICATOR FITTING | 2 | |
15.969 - LINK ASSEMBLY-FRONT LOAD ARM | |||
| Part Number | Application | Note | QTY |
5540-60 | WITH TWO GROOVES | 2 | |
ALL 55TH | WITH ONE GROOVE | 2 | |
ALL 55TH | ULTRAMATIC, WITH THREE GROOVES | 2 | |
ALL 55TH | WITH FOUR GROOVES | 2 | |
ALL 56TH | WITH ONE GROOVE | X | |
ALL 56TH | WITH TWO GROOVES | X | |
ALL 56TH | WITH THREE GROOVES | X | |
ALL 56TH | WITH FOUR GROOVES | X | |
15.971 - SEAL-FRONT LOAD ARM LINK BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 55TH | RETAINER | 2 | |
15.9712 - BALL STUD-FRONT LOAD ARM LINK | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.9713 - SEAT-FRONT LOAD ARM LINK | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
15.972 - RETAINER ASSEMBLY-FRONT LOAD ARM LINK | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
15.9723 - BALL STUD-FRONT LOAD ARM LINK RETAINER | |||
| Part Number | Application | Note | QTY |
ALL 56TH | 1 5/16 LONG | 2 | |
ALL 56TH | 7/8 LONG | 2 | |
15.9725 - SEAT-FRONT LOAD ARM LINK RETAINER | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
15.973 - INSULATOR-FRONT LOAD ARM LINK RETAINER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.974 - BUMPER ASSEMBLY-FRONT LOAD COMPRESSION | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.975 - RETAINER-FRONT LOAD COMPRESSION BUMPER | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.977 - BUMPER-FRONT LOAD REBOUND | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.979 - ARM ASSEMBLY-REAR LOAD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
ALL 55TH; 56TH | SCREW 1/2-20 X3, TO #5 BODY BRACKET | 2 | |
ALL 55TH; 56TH | LUBRICATOR FITTING | 2 | |
ALL 55TH; 56TH | NUT 7/16-20 | 2 | |
ALL 55TH; 56TH | NUT 1/2-20 | 2 | |
ALL 55TH; 56TH | BOLT 7/16-20 X 1 5/8,CLAMP | 2 | |
15.9792 - BALL STUD-REAR LOAD ARM | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
15.980 - SEAL-REAR LOAD ARM BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
15.9803 - RETAINER-REAR LOAD ARM BALL STUD SEAL | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 4 | |
15.9805 - SEAT-REAR LOAD ARM BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
15.981 - BEARING-REAR LOAD ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.983 - SEAL-REAR LOAD ARM BEARING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 4 | |
15.984 - SLEEVE-REAR LOAD ARM BEARING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.986 - LINK & BALL STUD ASSEMBLY-REAR LOAD ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | PIN 3/8 X 3, TO LINK | 2 | |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
15.9863 - STUD-REAR LOAD ARM LINK BALL | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
ALL 55TH | - | 2 | |
15.987 - SEAL-REAR LOAD ARM LINK BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
15.9873 - SEAT-REAR LOAD ARM LINK BALL STUD | |||
| Part Number | Application | Note | QTY |
ALL 56TH | - | 2 | |
15.988 - RETAINER ASSEMBLY-REAR LOAD ARM LINK BALL STUD SEAT | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 56TH | - | 2 | |
ALL 55TH; 56TH | SCREW 3/8-24 X 3 1/4 | 4 | |
ALL 55TH; 56TH | NUT 3/8-24 | 4 | |
15.989 - CUSHION-REAR LOAD ARM LINK | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.990 - BUMPER-REAR LOAD COMPRESSION | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.991 - ARM ASSEMBLY-REAR SUPPORT | |||
| Part Number | Application | Note | QTY |
ALL 55TH | LEFT | 1 | |
ALL 55TH | RIGHT | 1 | |
ALL 56TH | LEFT | 1 | |
ALL 56TH | RIGHT | 1 | |
15.992 - BRACKET ASSEMBLY-REAR SUPPORT ARM & SHOCK ABSORBER | |||
| Part Number | Application | Note | QTY |
ALL 55TH | LEFT | 1 | |
ALL 55TH | RIGHT | 1 | |
ALL 55TH | U BOLT | 2 | |
ALL 56TH | STUD 1/2-20 | 2 | |
ALL 56TH | U BOLT | 2 | |
ALL 56TH | LEFT | 1 | |
ALL 56TH | RIGHT | 1 | |
ALL 55TH; 56TH | NUT 9/16-18 | 4 | |
ALL 56TH | NUT 1/2-20, STUD | 2 | |
15.993 - BRACKET-REAR SUPPORT ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | WASHER 7/16 | 2 | |
ALL 55TH | OUTER, LEFT | 1 | |
ALL 55TH | OUTER, RIGHT | 1 | |
ALL 55TH | INNER, LEFT | 1 | |
ALL 55TH | INNER, RIGHT | 1 | |
ALL 56TH | INNER, LEFT | 1 | |
ALL 56TH | INNER, RIGHT | 1 | |
ALL 56TH | OUTER, LEFT | 1 | |
ALL 56TH | OUTER, RIGHT | 1 | |
ALL 55TH; 56TH | NUT 7/16-20 | 6 | |
ALL 55TH; 56TH | SCREW 7/16-20 X 1 1/8, TO FRAME | 6 | |
15.994 - BUSHING-REAR SUPPORT ARM | |||
| Part Number | Application | Note | QTY |
ALL 55TH | REAR, UPPER | 4 | |
ALL 55TH | REAR, LOWER | 4 | |
ALL 55TH; 56TH | FRONT | 4 | |
ALL 56TH | REAR | 8 | |
ALL 56TH | WASHER | 8 | |
15.995 - SHAFT-REAR SUPPORT ARM BUSHING FRONT | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 2 | |
ALL 55TH; 56TH | LOCKNUT 1-14 | 2 | |
ALL 56TH | - | 2 | |
15.996 - SPACER-REAR SUPPORT ARM BUSHING REAR | |||
| Part Number | Application | Note | QTY |
ALL 55TH | - | 4 | |
ALL 56TH | - | 4 | |
15.997 - BAR-TORSION | |||
| Part Number | Application | Note | QTY |
5680-88 | LONG, LEFT, HEAVY DUTY | 1 | |
5680-88 | LONG, RIGHT, HEAVY DUTY | 1 | |
5640-60-70 | SHORT | 2 | |
5640-60-70 | LONG, LEFT | 1 | |
5580; 5680-88 | SHORT | 2 | |
5580; 5680-88 | LONG, LEFT | 1 | |
5540-60 | LONG, LEFT | 1 | |
5540-60; 5640-60-70 | LONG, RIGHT | 1 | |
5540-60 | SHORT | 2 | |
5640-60-70 | LONG, RIGHT, HEAVY DUTY | 1 | |
5640-60-70 | LONG, LEFT, HEAVY DUTY | 1 | |
5580; 5680-88 | LONG, RIGHT | 1 | |
15.9972 - BEARING ASSEMBLY-TORSION BAR (SHORT) | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
ALL 56TH | WASHER 13/32 | 4 | |
ALL 55TH | LOCKWASHER 3/8 | 1 | |
ALL 55TH | SCREW 3/8-24 X 1 1/8 | 2 | |
ALL 56TH | SCREW 3/8-24 X 1 1/4 | 4 | |
ALL 55TH; 56TH | LOCKNUT 3/8-24 | 4 | |
ALL 55TH; 56TH | LUBRICATOR FITTING | 2 | |
15.9975 - SEAL-TORSION 56THBAR (SHORT) BEARING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.9977 - BUSHING-TORSION BAR (LONG) | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
15.998 - RETAINER-TORSION BAR (LONG) BUSHING | |||
| Part Number | Application | Note | QTY |
ALL 55TH; 56TH | - | 2 | |
ALL 55TH; 56TH | NUT 3/8-24 | 4 | |
ALL 55TH; 56TH | LOCKWASHER 3/8 | 4 | |
ALL 55TH | SCREW 3/8-24 X 7/8 | 4 | |
